Beretta 1301 Tactical MXT Extension Kit

Related Products

Shotgun Extension Tube Nut, 20ga.
Price: $28.45
Fits our extension tubes and is designed to fit your shotgun
Shotgun Extension Tube Nut, 20ga.
Fits our extension tubes and is designed to fit your shotgun

Shotgun Extension, Tube Only, 20ga.
Price: $33.20
Nordic Components MXT extension tube for 20 gauge shotguns.
• Available in variety of lengths between +4 and +7 (shell capacity measured with 2 3/4″ shells and may vary with shells of differing length)
• Includes ONLY MXT tube
• May require purchase of new magazine spring if you are changing the capacity of your existing extension

*Some shotgun magazine tubes may require minor modification. Call us if you are having problems fitting our extension tubes to your shotgun.
Attention Washington D.C. Residents: We will not ship any magazine tube extension or magazine extension tube component into Washington D.C. due to current regulations.
Shotgun Extension, Tube Only, 20ga.
Nordic Components MXT extension tube for 20 gauge shotguns.
• Available in variety of lengths between +4 and +7 (shell capacity measured with 2 3/4″ shells and may vary with shells of differing length)
• Includes ONLY MXT tube
• May require purchase of new magazine spring if you are changing the capacity of your existing extension

*Some shotgun magazine tubes may require minor modification. Call us if you are having problems fitting our extension tubes to your shotgun.
Attention Washington D.C. Residents: We will not ship any magazine tube extension or magazine extension tube component into Washington D.C. due to current regulations.

MXT Extension, Tube Only. 12ga.
Price: $28.45 – $33.20
Nordic Components MXT magazine extension tube.
• MXT extension tube for changing magazine extension length and capacity
• Available in variety of lengths between +2 and +9 (shell capacity measured with 2 3/4" shells and may vary with shells of differing length)
• Features relief groove to eliminate barrel clamp travel and ensure repeatable placement after disassembly
• Relief groove is not centered and can be relocated by reversing the tube (thread pitch the same on both ends)
• Includes ONLY MXT tube
• May require purchase of new magazine spring if you are changing the capacity of your existing extension
Attention Washington D.C. Residents: We will not ship any magazine tube extension or magazine extension tube component into Washington D.C. due to current regulations.

MXT Extension, Tube Only. 12ga.
Nordic Components MXT magazine extension tube.
• MXT extension tube for changing magazine extension length and capacity
• Available in variety of lengths between +2 and +9 (shell capacity measured with 2 3/4" shells and may vary with shells of differing length)
• Features relief groove to eliminate barrel clamp travel and ensure repeatable placement after disassembly
• Relief groove is not centered and can be relocated by reversing the tube (thread pitch the same on both ends)
• Includes ONLY MXT tube
• May require purchase of new magazine spring if you are changing the capacity of your existing extension
Attention Washington D.C. Residents: We will not ship any magazine tube extension or magazine extension tube component into Washington D.C. due to current regulations.


Shotgun QD Mount for Shotgun Barrel Clamps
Price: $19.00
Shotgun QD mount plate for attaching to Nordic Components shotgun barrel clamp.
• Allows mounting quick-detach (QD) sling swivel directly to barrel clamp without tactical rail
• Provides forward shotgun QD mount location
• Compatible with all Nordic Components barrel clamps
• Does not obstruct access to clamp assembly screws
• Includes one #10-32 screw for mounting (does not include sling swivel)
 
Shotgun QD Mount for Shotgun Barrel Clamps
Shotgun QD mount plate for attaching to Nordic Components shotgun barrel clamp.
• Allows mounting quick-detach (QD) sling swivel directly to barrel clamp without tactical rail
• Provides forward shotgun QD mount location
• Compatible with all Nordic Components barrel clamps
• Does not obstruct access to clamp assembly screws
• Includes one #10-32 screw for mounting (does not include sling swivel)
 

MXT Extension Tube Coupler
Price: $28.50
Coupler for Nordic Components MXT magazine extensions.
• Allows for combining multiple MXT extension tubes
• Facilitates expanded magazine capacity while retaining modular overall length
• Provides easy removal of additional magazine extension to accommodate use of standard length shotgun cases
Attention Washington D.C. Residents: We will not ship any magazine tube extension or magazine extension tube component into Washington D.C. due to current regulations.
MXT Extension Tube Coupler
Coupler for Nordic Components MXT magazine extensions.
• Allows for combining multiple MXT extension tubes
• Facilitates expanded magazine capacity while retaining modular overall length
• Provides easy removal of additional magazine extension to accommodate use of standard length shotgun cases
Attention Washington D.C. Residents: We will not ship any magazine tube extension or magazine extension tube component into Washington D.C. due to current regulations.

MXT Vinci Modular Extension
Price: $212.95
MXT modular extension kit for the Benelli Vinci and Super Vinci.
• Complete kit for increasing magazine capacity in the Vinci or Super Vinci
• Replaces factory magazine with Nordic Components proprietary magazine tube/locking nut combination (retains factory capacity)
• Uses standard MXT extension nut and tube to increase capacity
• Kit includes Vinci replacement tube, MXT extension tube, spring, follower, and endcap
 
Attention Washington D.C. Residents: We will not ship any magazine tube extension or magazine extension tube component into Washington D.C. due to current regulations.
MXT Vinci Modular Extension
MXT modular extension kit for the Benelli Vinci and Super Vinci.
• Complete kit for increasing magazine capacity in the Vinci or Super Vinci
• Replaces factory magazine with Nordic Components proprietary magazine tube/locking nut combination (retains factory capacity)
• Uses standard MXT extension nut and tube to increase capacity
• Kit includes Vinci replacement tube, MXT extension tube, spring, follower, and endcap
 
Attention Washington D.C. Residents: We will not ship any magazine tube extension or magazine extension tube component into Washington D.C. due to current regulations.

MXT Plug Cap-QDA
Rated 5.00 out of 5
Price: $18.95 – $20.95
Extension cap for returning shotgun to factory capacity.
• Attaches to MXT extension nut
• Facilitates attaching a sling to the magazine cap
• Available with QD Swivel Cup (push button QD swivel not included) or plain plug configuration
• May result in +1 capacity gain over factory configuration depending on shotgun model
NOTE: May require fabrication of a new magazine plug or modification of an existing magazine plug to restrict magazine to comply with Federal law regarding 2-round magazine capacity limit for hunting migratory waterfowl
MXT Plug Cap-QDA
Extension cap for returning shotgun to factory capacity.
• Attaches to MXT extension nut
• Facilitates attaching a sling to the magazine cap
• Available with QD Swivel Cup (push button QD swivel not included) or plain plug configuration
• May result in +1 capacity gain over factory configuration depending on shotgun model
NOTE: May require fabrication of a new magazine plug or modification of an existing magazine plug to restrict magazine to comply with Federal law regarding 2-round magazine capacity limit for hunting migratory waterfowl

Shotgun Bolt Operating Handle
Rated 5.00 out of 5
Price: $29.95
Enlarged bolt handle for most tactical/competition shotguns.
• Provides increased surface for rapid manipulation of bolt
• Simple installation with no gunsmithing required
• Rounded design decreases likelihood of injury to hand or fingers
 
Shotgun Bolt Operating Handle
Enlarged bolt handle for most tactical/competition shotguns.
• Provides increased surface for rapid manipulation of bolt
• Simple installation with no gunsmithing required
• Rounded design decreases likelihood of injury to hand or fingers
 

Shotgun Barrel Clamp for 12ga.
Rated 5.00 out of 5
Price: $30.35 – $35.35
The Nordic Components shotgun barrel clamp provides extra rigidity for your magazine extension.
• Fits most shotguns when used with a Nordic Components Extension
• Features 10-32 threaded hole for mounting Picatinny rails or other accessories
• Not compatible with original Browning Auto-5 or similar shotguns with reciprocating barrel
Note:  The shotgun barrel clamp makes contact with your barrel and may damage/wear the finish on your barrel with use. We recommend using masking tape applied to the inside of the clamp fingers that contact the barrel to alleviate finish wear. Because we have no control over the installation of this product, Nordic Components is not responsible for any resulting wear or damage. Do not apply anything to the clamp fingers that contact the magazine tube.
Shotgun Barrel Clamp for 12ga.
The Nordic Components shotgun barrel clamp provides extra rigidity for your magazine extension.
• Fits most shotguns when used with a Nordic Components Extension
• Features 10-32 threaded hole for mounting Picatinny rails or other accessories
• Not compatible with original Browning Auto-5 or similar shotguns with reciprocating barrel
Note:  The shotgun barrel clamp makes contact with your barrel and may damage/wear the finish on your barrel with use. We recommend using masking tape applied to the inside of the clamp fingers that contact the barrel to alleviate finish wear. Because we have no control over the installation of this product, Nordic Components is not responsible for any resulting wear or damage. Do not apply anything to the clamp fingers that contact the magazine tube.

Shotgun Barrel Clamp with Tac Rail – 12ga
Price: $45.55 – $50.55
The Nordic Components shotgun barrel clamp provides extra rigidity for your magazine extension.  Includes Picatinny rail and mounting screw.
• Fits most shotguns when used with a Nordic Components Extension
• Features 10-32 threaded hole for mounting Picatinny rails or other accessories
• Includes 1.5" Picatinny rail for mounting flashlight, laser, or other compatible accessory
• Can be used as regular shotgun barrel clamp without Picatinny rail installed
• Shotgun barrel clamp not compatible with original Browning Auto-5 or similar shotguns with reciprocating barrel
Note:  The shotgun barrel clamp makes contact with your barrel and may damage/wear the finish on your barrel with use. We recommend using masking tape applied to the inside of the clamp fingers that contact the barrel to alleviate finish wear. Because we have no control over the installation of this product, Nordic Components is not responsible for any resulting wear or damage. Do not apply anything to the clamp fingers that contact the magazine tube.
Shotgun Barrel Clamp with Tac Rail – 12ga
The Nordic Components shotgun barrel clamp provides extra rigidity for your magazine extension.  Includes Picatinny rail and mounting screw.
• Fits most shotguns when used with a Nordic Components Extension
• Features 10-32 threaded hole for mounting Picatinny rails or other accessories
• Includes 1.5" Picatinny rail for mounting flashlight, laser, or other compatible accessory
• Can be used as regular shotgun barrel clamp without Picatinny rail installed
• Shotgun barrel clamp not compatible with original Browning Auto-5 or similar shotguns with reciprocating barrel
Note:  The shotgun barrel clamp makes contact with your barrel and may damage/wear the finish on your barrel with use. We recommend using masking tape applied to the inside of the clamp fingers that contact the barrel to alleviate finish wear. Because we have no control over the installation of this product, Nordic Components is not responsible for any resulting wear or damage. Do not apply anything to the clamp fingers that contact the magazine tube.

Extension Tube Springs 12ga/20ga
Rated 5.00 out of 5
Price: $7.95 – $10.95
Nordic Components replacement spring for magazine extensions.
• Spring has extra length to allow fitting to magazine
• Ships coiled in package with instructions for determining length and cutting
• Available in standard and heavy-duty strengths for 12ga, standard strength for 20ga
Extension Tube Springs 12ga/20ga
Nordic Components replacement spring for magazine extensions.
• Spring has extra length to allow fitting to magazine
• Ships coiled in package with instructions for determining length and cutting
• Available in standard and heavy-duty strengths for 12ga, standard strength for 20ga

MXT Vinci Extension without Tube
Price: $149.95
MXT modular extension kit for the Benelli Vinci and Super Vinci.
• Assembly for increasing magazine capacity in the Vinci or Super Vinci
• Replaces factory magazine with Nordic Components proprietary magazine tube/locking nut combination (retains factory capacity)
• Uses standard MXT tube to increase capacity
• Kit includes Vinci replacement tube, nut, and follower
• Extension tube, spring, and endcap not included
MXT Vinci Extension without Tube
MXT modular extension kit for the Benelli Vinci and Super Vinci.
• Assembly for increasing magazine capacity in the Vinci or Super Vinci
• Replaces factory magazine with Nordic Components proprietary magazine tube/locking nut combination (retains factory capacity)
• Uses standard MXT tube to increase capacity
• Kit includes Vinci replacement tube, nut, and follower
• Extension tube, spring, and endcap not included