Products
-
MXT Shotgun Magazine Extension Kit, 12ga.
Price: $56.95–$75.95Complete MXT shotgun magazine extension kit for increasing magazine capacity.
- Anodized 6061 aluminum for strength and weight
- Available in a variety of lengths providing capacity increases of +1 to +9 for all major brands and most models
- Features relief groove to eliminate barrel clamp travel and ensure repeatable placement after disassembly (+2 through +9 extensions only)
- Relief groove located off-center to allow location adjustment by reversing the tube
- Machined with matching thread pitch on both ends to allow reversing the tube
All capacities are measured with 2.75" star-crimped shells.
Note: May require modification of shotgun for installation and/or proper function. Any spring/follower retention devices will have to be removed to allow extension to function.
Attention Washington, D.C. Residents: We will not ship any magazine tube extension or magazine extension tube component into Washington, D.C. due to current regulations.
MXT Shotgun Magazine Extension Kit, 12ga.
Complete MXT shotgun magazine extension kit for increasing magazine capacity.
- Anodized 6061 aluminum for strength and weight
- Available in a variety of lengths providing capacity increases of +1 to +9 for all major brands and most models
- Features relief groove to eliminate barrel clamp travel and ensure repeatable placement after disassembly (+2 through +9 extensions only)
- Relief groove located off-center to allow location adjustment by reversing the tube
- Machined with matching thread pitch on both ends to allow reversing the tube
All capacities are measured with 2.75" star-crimped shells.
Note: May require modification of shotgun for installation and/or proper function. Any spring/follower retention devices will have to be removed to allow extension to function.
Attention Washington, D.C. Residents: We will not ship any magazine tube extension or magazine extension tube component into Washington, D.C. due to current regulations.
-
Forward Assist Assembly Round
Price: $12.95OEM-style forward assist for AR-pattern rifles.
- Mil-spec quality replacement part for standard AR-pattern upper receivers
- Round button face
- Does not include spring or roll pin
Forward Assist Assembly Round
OEM-style forward assist for AR-pattern rifles.
- Mil-spec quality replacement part for standard AR-pattern upper receivers
- Round button face
- Does not include spring or roll pin
-
Shotgun QD Mount for Shotgun Barrel Clamps
Price: $19.00Shotgun QD mount plate for attaching to Nordic Components shotgun barrel clamp.
- Allows mounting quick-detach (QD) sling swivel directly to barrel clamp without tactical rail
- Provides forward shotgun QD mount location
- Compatible with all Nordic Components barrel clamps
- Does not obstruct access to clamp assembly screws
- Includes one #10-32 screw for mounting (does not include sling swivel)
Shotgun QD Mount for Shotgun Barrel Clamps
Shotgun QD mount plate for attaching to Nordic Components shotgun barrel clamp.
- Allows mounting quick-detach (QD) sling swivel directly to barrel clamp without tactical rail
- Provides forward shotgun QD mount location
- Compatible with all Nordic Components barrel clamps
- Does not obstruct access to clamp assembly screws
- Includes one #10-32 screw for mounting (does not include sling swivel)
-
Extension Tube Springs 12ga/20ga
Price: $5.55–$7.45Nordic Components replacement spring for magazine extensions.
- Spring has extra length to allow fitting to magazine
- Ships coiled in package with instructions for determining length and cutting
- Available in standard and heavy-duty strengths for 12ga, standard strength for 20ga
Extension Tube Springs 12ga/20ga
Nordic Components replacement spring for magazine extensions.
- Spring has extra length to allow fitting to magazine
- Ships coiled in package with instructions for determining length and cutting
- Available in standard and heavy-duty strengths for 12ga, standard strength for 20ga
-
PMAG Extension Kit
Price: $9.0018 round extension for Magpul PMAG®.
- Increases capacity of standard 30-round PMAG® to 48 rounds
- Made of lightweight polycarbonate for weight reduction and strength
- Available in black, clear, and pink
- Fits Gen 1, Gen 2, and MOE PMAGs®
- Includes extended replacement spring
- We do not recommend use of any solvents, oils, or thread-locking products with this extension
Restricted Shipping
Please make sure to follow your local and state laws to ensure you are allowed to possess these.PMAG Extension Kit
18 round extension for Magpul PMAG®.
- Increases capacity of standard 30-round PMAG® to 48 rounds
- Made of lightweight polycarbonate for weight reduction and strength
- Available in black, clear, and pink
- Fits Gen 1, Gen 2, and MOE PMAGs®
- Includes extended replacement spring
- We do not recommend use of any solvents, oils, or thread-locking products with this extension
Restricted Shipping
Please make sure to follow your local and state laws to ensure you are allowed to possess these. -
Low Drag Shotgun Follower 12ga/20ga
Price: $18.00Nordic Components anodized aluminum low-drag shotgun follower
- Improved design reduces shotgun follower binding or hangups within tube, particularly in transition area between factory magazine and extension
- Anodized aluminum construction for durability and longevity
- Red and blue anodization increases shotgun follower visibility for additional safety while checking magazine for ammunition
Low Drag Shotgun Follower 12ga/20ga
Nordic Components anodized aluminum low-drag shotgun follower
- Improved design reduces shotgun follower binding or hangups within tube, particularly in transition area between factory magazine and extension
- Anodized aluminum construction for durability and longevity
- Red and blue anodization increases shotgun follower visibility for additional safety while checking magazine for ammunition
-
Shotgun Barrel Clamp for 12ga.
Price: $30.35–$35.35The Nordic Components shotgun barrel clamp provides extra rigidity for your magazine extension.
- Fits most shotguns when used with a Nordic Components Extension
- Features 10-32 threaded hole for mounting Picatinny rails or other accessories
- Not compatible with original Browning Auto-5 or similar shotguns with reciprocating barrel
Note: The shotgun barrel clamp makes contact with your barrel and may damage/wear the finish on your barrel with use. We recommend using masking tape applied to the inside of the clamp fingers that contact the barrel to alleviate finish wear. Because we have no control over the installation of this product, Nordic Components is not responsible for any resulting wear or damage. Do not apply anything to the clamp fingers that contact the magazine tube.
Shotgun Barrel Clamp for 12ga.
The Nordic Components shotgun barrel clamp provides extra rigidity for your magazine extension.
- Fits most shotguns when used with a Nordic Components Extension
- Features 10-32 threaded hole for mounting Picatinny rails or other accessories
- Not compatible with original Browning Auto-5 or similar shotguns with reciprocating barrel
Note: The shotgun barrel clamp makes contact with your barrel and may damage/wear the finish on your barrel with use. We recommend using masking tape applied to the inside of the clamp fingers that contact the barrel to alleviate finish wear. Because we have no control over the installation of this product, Nordic Components is not responsible for any resulting wear or damage. Do not apply anything to the clamp fingers that contact the magazine tube.
-
Speed Button for Autoloading Shotguns
Price: $13.25Nordic Components oversized shotgun bolt release.
- Provides increased surface area for faster and easier reloads
- Perfect for use on the competition range or in the hunting blind
- Installation requires drilling and tapping factory bolt release to install Speed Button
- Compatible with most shotgun models
- Includes #6-32 screw
Speed Button for Autoloading Shotguns
Nordic Components oversized shotgun bolt release.
- Provides increased surface area for faster and easier reloads
- Perfect for use on the competition range or in the hunting blind
- Installation requires drilling and tapping factory bolt release to install Speed Button
- Compatible with most shotgun models
- Includes #6-32 screw
-
MXT Extension, Tube Only. 12ga.
Price: $28.45–$33.20Nordic Components MXT magazine extension tube.
- MXT extension tube for changing magazine extension length and capacity
- Available in variety of lengths between +2 and +9 (shell capacity measured with 2 3/4" shells and may vary with shells of differing length)
- Features relief groove to eliminate barrel clamp travel and ensure repeatable placement after disassembly
- Relief groove is not centered and can be relocated by reversing the tube (thread pitch the same on both ends)
- Includes ONLY MXT tube
- May require purchase of new magazine spring if you are changing the capacity of your existing extension
Attention Washington D.C. Residents: We will not ship any magazine tube extension or magazine extension tube component into Washington D.C. due to current regulations.
MXT Extension, Tube Only. 12ga.
Nordic Components MXT magazine extension tube.
- MXT extension tube for changing magazine extension length and capacity
- Available in variety of lengths between +2 and +9 (shell capacity measured with 2 3/4" shells and may vary with shells of differing length)
- Features relief groove to eliminate barrel clamp travel and ensure repeatable placement after disassembly
- Relief groove is not centered and can be relocated by reversing the tube (thread pitch the same on both ends)
- Includes ONLY MXT tube
- May require purchase of new magazine spring if you are changing the capacity of your existing extension
Attention Washington D.C. Residents: We will not ship any magazine tube extension or magazine extension tube component into Washington D.C. due to current regulations.
-
Beretta 1301 Tactical MXT Extension Kit
Price: $145.00Beretta 1301 extension kit in a single package for Tactical model.
- Features MXT magazine extension designed exclusively for the 1301 Tactical
- Beretta 1301 extension increases magazine capacity to 7 rounds (capacity determined with 2 3/4" shells and may vary with shells of differing length)
- Barrel clamp kit includes 1301 Tactical-exclusive clamp, Picatinny rail, and QDA swivel attachment
- Utilizes factory magazine spring (spare generic spring included)
Beretta 1301 Tactical MXT Extension Kit
Beretta 1301 extension kit in a single package for Tactical model.
- Features MXT magazine extension designed exclusively for the 1301 Tactical
- Beretta 1301 extension increases magazine capacity to 7 rounds (capacity determined with 2 3/4" shells and may vary with shells of differing length)
- Barrel clamp kit includes 1301 Tactical-exclusive clamp, Picatinny rail, and QDA swivel attachment
- Utilizes factory magazine spring (spare generic spring included)
-
Surefire 3P Eliminator Flash Hider
Price: $59.00The advanced SureFire SureFire 3P Eliminator 556 three-prong flash hider, which fits M4/M16 weapons and variants with 1/2x28 muzzle threads, features a patent-pending design that greatly reduces muzzle flash — typically greater than 99%—when compared with a plain muzzle. Boasting robust tines built to withstand the rigors of combat, the SureFire 3P Eliminator 556 duplicates the key functional design elements of the SureFire SF3P-556-1/2-28 flash hider, but unlike the latter it cannot be used to mount SureFire SOCOM suppressors.
Precision machined from US mill-certified steel bar stock—including high-precision single-point cut threads for optimum thread interface—the SureFire 3P Eliminator 556 muzzle brake has a black Melonite finish that provides maximum protection under harsh environmental conditions and facilitates cleaning even after extreme use.
Surefire 3P Eliminator Flash Hider
The advanced SureFire SureFire 3P Eliminator 556 three-prong flash hider, which fits M4/M16 weapons and variants with 1/2x28 muzzle threads, features a patent-pending design that greatly reduces muzzle flash — typically greater than 99%—when compared with a plain muzzle. Boasting robust tines built to withstand the rigors of combat, the SureFire 3P Eliminator 556 duplicates the key functional design elements of the SureFire SF3P-556-1/2-28 flash hider, but unlike the latter it cannot be used to mount SureFire SOCOM suppressors.
Precision machined from US mill-certified steel bar stock—including high-precision single-point cut threads for optimum thread interface—the SureFire 3P Eliminator 556 muzzle brake has a black Melonite finish that provides maximum protection under harsh environmental conditions and facilitates cleaning even after extreme use.
-
18″ .223 Complete Upper
Price: $1,200.00–$1,250.00UPPER:
- Caliber: .223 Wylde
- Barrel: 1-8 18" stainless steel w/ M4 feed ramps and rifle length gas port - bead-blasted finish and cryo-treated (black Gun Kote finish optional)
- Muzzle Device: NC flash hider, black finish
- Gas Block: NC non-adjustable low-profile .750 dia.
- Handguard: NC-3 freefloat M-LOK compatible handguard - XL available
- Upper Receiver: NC15 billet
- Bolt Carrier: Black nitride slabside AR carrier with properly staked gas key
- Bolt: 9310 MPI
- Charging Handle: NC Heavy Duty handle with Badger Tac-Latch
18″ .223 Complete Upper
UPPER:
- Caliber: .223 Wylde
- Barrel: 1-8 18" stainless steel w/ M4 feed ramps and rifle length gas port - bead-blasted finish and cryo-treated (black Gun Kote finish optional)
- Muzzle Device: NC flash hider, black finish
- Gas Block: NC non-adjustable low-profile .750 dia.
- Handguard: NC-3 freefloat M-LOK compatible handguard - XL available
- Upper Receiver: NC15 billet
- Bolt Carrier: Black nitride slabside AR carrier with properly staked gas key
- Bolt: 9310 MPI
- Charging Handle: NC Heavy Duty handle with Badger Tac-Latch
-
16″ .300BLK Complete Upper
Price: $1,175.00–$1,250.00UPPER:
- Caliber: .300BLK
- Barrel: 1-8 16" stainless steel w/ M4 feed ramps and carbine length gas port - bead-blasted finish and cryo-treated (black Gun Kote finish optional)
- Muzzle Device: NC flash hider, black finish
- Gas Block: NC non-adjustable low-profile .750 dia.
- Handguard: NC-3 freefloat M-LOK compatible handguard - Rifle length and XL available
- Upper Receiver: NC15 billet
- Bolt Carrier: Black nitride slabside AR carrier with properly staked gas key
- Bolt: 9310 MPI
16″ .300BLK Complete Upper
UPPER:
- Caliber: .300BLK
- Barrel: 1-8 16" stainless steel w/ M4 feed ramps and carbine length gas port - bead-blasted finish and cryo-treated (black Gun Kote finish optional)
- Muzzle Device: NC flash hider, black finish
- Gas Block: NC non-adjustable low-profile .750 dia.
- Handguard: NC-3 freefloat M-LOK compatible handguard - Rifle length and XL available
- Upper Receiver: NC15 billet
- Bolt Carrier: Black nitride slabside AR carrier with properly staked gas key
- Bolt: 9310 MPI
-
16″ .223 Complete Upper
Price: $1,175.00–$1,250.00UPPER:
- Caliber: .223 Wylde
- Barrel: 1-8 16" stainless steel w/ M4 feed ramps and mid-length gas port - bead-blasted finish and cryo-treated (black Gun Kote finish optional)
- Muzzle Device: NC flash hider, black finish
- Gas Block: NC non-adjustable low-profile .750 dia.
- Handguard: NC-3 freefloat M-LOK compatible handguard - Rifle length, and XL available
- Upper Receiver: NC15 billet
- Bolt Carrier: Black nitride slabside AR carrier with properly staked gas key
- Bolt: 9310 MPI
16″ .223 Complete Upper
UPPER:
- Caliber: .223 Wylde
- Barrel: 1-8 16" stainless steel w/ M4 feed ramps and mid-length gas port - bead-blasted finish and cryo-treated (black Gun Kote finish optional)
- Muzzle Device: NC flash hider, black finish
- Gas Block: NC non-adjustable low-profile .750 dia.
- Handguard: NC-3 freefloat M-LOK compatible handguard - Rifle length, and XL available
- Upper Receiver: NC15 billet
- Bolt Carrier: Black nitride slabside AR carrier with properly staked gas key
- Bolt: 9310 MPI
-
11.5″ 5.56 Complete Upper
Price: $1,150.00UPPER:
- Caliber: 5.56 NATO
- Barrel: 1-7 11.5″ 4150 Mil-B-11595E steel w/ M4 feed ramps and carbine length gas port – bead-blasted, QPQ finish and cryo-treated
- Muzzle Device: NC flash hider, black finish
- Gas Block: NC non-adjustable low-profile .750 dia.
- Handguard: NC-3 freefloat M-LOK compatible handguard
- Upper Receiver: NC15 billet
- Bolt Carrier: Black nitride 8620 steel slabside AR carrier with properly staked gas key
- Bolt: 9310 MPI
*ALL NFA RULES APPLY
11.5″ 5.56 Complete Upper
UPPER:
- Caliber: 5.56 NATO
- Barrel: 1-7 11.5″ 4150 Mil-B-11595E steel w/ M4 feed ramps and carbine length gas port – bead-blasted, QPQ finish and cryo-treated
- Muzzle Device: NC flash hider, black finish
- Gas Block: NC non-adjustable low-profile .750 dia.
- Handguard: NC-3 freefloat M-LOK compatible handguard
- Upper Receiver: NC15 billet
- Bolt Carrier: Black nitride 8620 steel slabside AR carrier with properly staked gas key
- Bolt: 9310 MPI
*ALL NFA RULES APPLY
-
10.5″ .300BLK Complete Upper
Price: $1,100.00–$1,150.00UPPER:
- Caliber: .300BLK
- Barrel: 1-8 10.5" stainless steel w/ M4 feed ramps and pistol length gas port - bead-blasted finish and cryo-treated (black Gun Kote finish optional)
- Muzzle Device: NC flash hider, black finish
- Gas Block: NC non-adjustable low-profile .750 dia.
- Handguard: NC-3 freefloat M-LOK compatible handguard - Midlength available
- Upper Receiver: NC15 billet
- Bolt Carrier: Black nitride slabside AR carrier with properly staked gas key
- Bolt: 9310 MPI
*ALL NFA RULES APPLY
10.5″ .300BLK Complete Upper
UPPER:
- Caliber: .300BLK
- Barrel: 1-8 10.5" stainless steel w/ M4 feed ramps and pistol length gas port - bead-blasted finish and cryo-treated (black Gun Kote finish optional)
- Muzzle Device: NC flash hider, black finish
- Gas Block: NC non-adjustable low-profile .750 dia.
- Handguard: NC-3 freefloat M-LOK compatible handguard - Midlength available
- Upper Receiver: NC15 billet
- Bolt Carrier: Black nitride slabside AR carrier with properly staked gas key
- Bolt: 9310 MPI
*ALL NFA RULES APPLY
-
NC-3 Free Float Hand Guards
Price: $165.00–$225.00Nordic Components slim diameter free float M-LOK-compatible handguard.
- Fits all mil-spec AR15-pattern upper receivers
- Free-float rigidity in a lightweight package
- Continuous top rail for mounting optics and other accessories
- M-LOK slots provide modularity without unnecessary weight increase
- Reduces weight by eliminating fixed Picatinny rails on sides and bottom
- Machined from 6061 aluminum
- Includes hardware and instruction installations
- Available in midlength, rifle length, and XL length
NC-3 Free Float Hand Guards
Nordic Components slim diameter free float M-LOK-compatible handguard.
- Fits all mil-spec AR15-pattern upper receivers
- Free-float rigidity in a lightweight package
- Continuous top rail for mounting optics and other accessories
- M-LOK slots provide modularity without unnecessary weight increase
- Reduces weight by eliminating fixed Picatinny rails on sides and bottom
- Machined from 6061 aluminum
- Includes hardware and instruction installations
- Available in midlength, rifle length, and XL length
-
16″ NC-15 .300BLK
Price: $1,574.00–$1,649.00A rifle designed for and used by professionals, at a price within reach of anyone. The NC15 features high quality components, including a tack-driving stainless steel barrel, Black nitride-finished bolt carrier group, and Magpul furniture, as well as optional barrel finishes and handguard lengths, and a lower receiver that is machined to stand out from the rest of its forged counterparts. For one rifle that is at home anywhere, from the match cart to the patrol car, nothing fits the bill quite like the NC15.
UPPER:
- Caliber: .300BLK
- Barrel: 1-8 16" stainless steel w/ M4 feed ramps and Carbine length gas port - bead-blasted finish and cryo-treated (black Teflon finish optional)
- Muzzle Device: NC flash hider, black finish
- Gas Block: NC non-adjustable low-profile .750 dia.
- Handguard: NC-3 freefloat M-LOK compatible handguard - Rifle length and XL available
- Upper Receiver: NC15 billet
- Bolt Carrier: Black nitride slabside M16 carrier with properly staked gas key
- Bolt: 9310 MPI
LOWER:
- Lower Receiver: NC15 forged lower receiver
- Bolt Catch: Mil-Spec
- Magazine Release: Mil-Spec
- Fire Control Group: Mil-Spec
- Trigger Guard: Magpul MOE Polymer
- Grip: Magpul MOE
- Buffer: Standard carbine
- Buffer Tube: Mil-spec 6-position
- Stock: Magpul CTR mil-spec
*All serialized items must be sent to an FFL dealer
16″ NC-15 .300BLK
A rifle designed for and used by professionals, at a price within reach of anyone. The NC15 features high quality components, including a tack-driving stainless steel barrel, Black nitride-finished bolt carrier group, and Magpul furniture, as well as optional barrel finishes and handguard lengths, and a lower receiver that is machined to stand out from the rest of its forged counterparts. For one rifle that is at home anywhere, from the match cart to the patrol car, nothing fits the bill quite like the NC15.
UPPER:
- Caliber: .300BLK
- Barrel: 1-8 16" stainless steel w/ M4 feed ramps and Carbine length gas port - bead-blasted finish and cryo-treated (black Teflon finish optional)
- Muzzle Device: NC flash hider, black finish
- Gas Block: NC non-adjustable low-profile .750 dia.
- Handguard: NC-3 freefloat M-LOK compatible handguard - Rifle length and XL available
- Upper Receiver: NC15 billet
- Bolt Carrier: Black nitride slabside M16 carrier with properly staked gas key
- Bolt: 9310 MPI
LOWER:
- Lower Receiver: NC15 forged lower receiver
- Bolt Catch: Mil-Spec
- Magazine Release: Mil-Spec
- Fire Control Group: Mil-Spec
- Trigger Guard: Magpul MOE Polymer
- Grip: Magpul MOE
- Buffer: Standard carbine
- Buffer Tube: Mil-spec 6-position
- Stock: Magpul CTR mil-spec
*All serialized items must be sent to an FFL dealer
-
10.5″ NC-15 .300BLK
Price: $1,499.00–$1,549.00A rifle designed for and used by professionals, at a price within reach of anyone. The NC15 features high quality components, including a tack-driving stainless steel barrel, Black nitride-finished bolt carrier group, and Magpul furniture, as well as optional barrel finishes and handguard lengths, and a lower receiver that is machined to stand out from the rest of its forged counterparts. For one rifle that is at home anywhere, from the match cart to the patrol car, nothing fits the bill quite like the NC15.
UPPER:
- Caliber: .300BLK
- Barrel: 1-8 10.5" stainless steel w/ M4 feed ramps and pistol length gas port - bead-blasted finish and cryo-treated (black Teflon finish optional)
- Muzzle Device: NC flash hider, black finish
- Gas Block: NC non-adjustable low-profile .750 dia.
- Handguard: NC-3 freefloat M-LOK compatible handguard - Midlength available
- Upper Receiver: NC15 billet
- Bolt Carrier: Black nitride slabside M16 carrier with properly staked gas key
- Bolt: 9310 MPI
LOWER:
- Lower Receiver: NC15 forged lower receiver
- Bolt Catch: Mil-Spec
- Magazine Release: Mil-Spec
- Fire Control Group: Mil-Spec
- Trigger Guard: Magpul MOE Polymer
- Grip: Magpul MOE
- Buffer: Standard carbine
- Buffer Tube: Mil-spec 6-position
- Stock: Magpul CTR mil-spec
*ALL NFA RULES APPLY
*All serialized items must be sent to an FFL dealer
10.5″ NC-15 .300BLK
A rifle designed for and used by professionals, at a price within reach of anyone. The NC15 features high quality components, including a tack-driving stainless steel barrel, Black nitride-finished bolt carrier group, and Magpul furniture, as well as optional barrel finishes and handguard lengths, and a lower receiver that is machined to stand out from the rest of its forged counterparts. For one rifle that is at home anywhere, from the match cart to the patrol car, nothing fits the bill quite like the NC15.
UPPER:
- Caliber: .300BLK
- Barrel: 1-8 10.5" stainless steel w/ M4 feed ramps and pistol length gas port - bead-blasted finish and cryo-treated (black Teflon finish optional)
- Muzzle Device: NC flash hider, black finish
- Gas Block: NC non-adjustable low-profile .750 dia.
- Handguard: NC-3 freefloat M-LOK compatible handguard - Midlength available
- Upper Receiver: NC15 billet
- Bolt Carrier: Black nitride slabside M16 carrier with properly staked gas key
- Bolt: 9310 MPI
LOWER:
- Lower Receiver: NC15 forged lower receiver
- Bolt Catch: Mil-Spec
- Magazine Release: Mil-Spec
- Fire Control Group: Mil-Spec
- Trigger Guard: Magpul MOE Polymer
- Grip: Magpul MOE
- Buffer: Standard carbine
- Buffer Tube: Mil-spec 6-position
- Stock: Magpul CTR mil-spec
*ALL NFA RULES APPLY
*All serialized items must be sent to an FFL dealer
-
9.25″ NC-22LR Pistol
Price: $699.00The grown-up, complete pistol version of our popular 22RB dedicated upper -- because everyone knows that the only thing better than a dedicated .22LR upper is a dedicated .22LR upper that comes with its own fully-equipped lower receiver.
SUPPRESSOR READY!
The 22RB's match-grade barrel comes prepared to accept a suppressor - the barrel threads are cut to the proper spec for most popular .22 suppressors, and has a machined tenon to accommodate the O-rings found on certain suppressor models.
Features:
Upper:
- 1-16 twist match barrel
- A2 flash suppressor
- Aluminum slim diameter hand guard
- Aluminum upper
- Stainless steel bolt
Lower:
- NC15 forged lower receiver
- Mil-spec fire control group, mag catch, and bolt release
- Magpul MOE polymer trigger guard
- KAK Pistol Brace and buffer tube
- Standard carbine buffer and spring
*Will accept all Black Dog AR-15 .22 magazines
*All serialized items must be sent to an FFL dealer
9.25″ NC-22LR Pistol
The grown-up, complete pistol version of our popular 22RB dedicated upper -- because everyone knows that the only thing better than a dedicated .22LR upper is a dedicated .22LR upper that comes with its own fully-equipped lower receiver.
SUPPRESSOR READY!
The 22RB's match-grade barrel comes prepared to accept a suppressor - the barrel threads are cut to the proper spec for most popular .22 suppressors, and has a machined tenon to accommodate the O-rings found on certain suppressor models.
Features:
Upper:
- 1-16 twist match barrel
- A2 flash suppressor
- Aluminum slim diameter hand guard
- Aluminum upper
- Stainless steel bolt
Lower:
- NC15 forged lower receiver
- Mil-spec fire control group, mag catch, and bolt release
- Magpul MOE polymer trigger guard
- KAK Pistol Brace and buffer tube
- Standard carbine buffer and spring
*Will accept all Black Dog AR-15 .22 magazines
*All serialized items must be sent to an FFL dealer
-
Save
Corvette Comp AR Brake
Price:$47.45–$49.95$9.95–$15.95Nordic Components' Corvette Comp AR brake reduces muzzle climb and felt recoil.
- Available in .223 and .308 models with either black or stainless steel finish
- Features standard AR brake threads according to bore diameter (1/2-28 for .223, 5/8-24 for .308)
- Includes crush washer for installation
Corvette Comp AR Brake
Nordic Components' Corvette Comp AR brake reduces muzzle climb and felt recoil.
- Available in .223 and .308 models with either black or stainless steel finish
- Features standard AR brake threads according to bore diameter (1/2-28 for .223, 5/8-24 for .308)
- Includes crush washer for installation
-
Save
Gas Blocks
Price:$39.95$15.95Gas blocks for use on 3/4" diameter barrel
Gas Blocks
Gas blocks for use on 3/4" diameter barrel
-
Save
Quad Rail Hand Guard
Price:$149.00$50.004 Rail Picatinny Free Float Hand Guard for all Mil Spec AR-15 upper receivers
- Includes Barrel Nut and Locking Ring
- Aluminum construction
- Matte Black hard coat anodized
Quad Rail Hand Guard
4 Rail Picatinny Free Float Hand Guard for all Mil Spec AR-15 upper receivers
- Includes Barrel Nut and Locking Ring
- Aluminum construction
- Matte Black hard coat anodized
-
Save
Tactical Comp
Price:$37.95$9.95–$15.95Nordic Components Tactical Compensator for .223 caliber AR-pattern rifles.
- Works with rifles with .223 bore diameter and 1/2 x 28 muzzle threads
- Provides effective muzzle rise and recoil reduction without significantly increasing the exterior diameter of the barrel
- Available in black oxide or stainless steel finish
- Includes crush washer
Tactical Comp
Nordic Components Tactical Compensator for .223 caliber AR-pattern rifles.
- Works with rifles with .223 bore diameter and 1/2 x 28 muzzle threads
- Provides effective muzzle rise and recoil reduction without significantly increasing the exterior diameter of the barrel
- Available in black oxide or stainless steel finish
- Includes crush washer
