Shotgun

Showing 1–16 of 41 results

View as:
  • 20ga Extension Nut for Benelli M1/M2

    Price: $43.85

    20ga extension tube nut for Benelli M1 and M2 shotguns.  This nut will replace your factory magazine cap and allow installation of a 20ga shotgun extension tube.

    20ga Extension Nut for Benelli M1/M2

    20ga extension tube nut for Benelli M1 and M2 shotguns.  This nut will replace your factory magazine cap and allow installation of a 20ga shotgun extension tube.

  • 20ga Extension Nut for Benelli Nova, CZ, Weatherby, and Mossberg Shotguns

    Price: $43.85

    20ga extension tube nut for certain Benelli, CZ, Weatherby, and Mossberg shotguns (see list below).  This nut will replace your factory magazine cap and allow installation of an 20ga shotgun extension tube kit.

    Fits:

    • Benelli Nova
    • CZ 720
    • Weatherby SA-08
    • Mossberg SA-20

    20ga Extension Nut for Benelli Nova, CZ, Weatherby, and Mossberg Shotguns

    20ga extension tube nut for certain Benelli, CZ, Weatherby, and Mossberg shotguns (see list below).  This nut will replace your factory magazine cap and allow installation of an 20ga shotgun extension tube kit.

    Fits:

    • Benelli Nova
    • CZ 720
    • Weatherby SA-08
    • Mossberg SA-20
  • 20ga Extension Nut for Remington Shotguns

    Price: $43.85

    20ga extension tube nut for Remington 870, 1100, 11-87 shotguns.  This nut will replace your factory magazine cap and allow installation of a 20ga shotgun extension tube.

    NOTE:  This extension will not be compatible with older 1100s that use a 12ga magazine tube.

    20ga Extension Nut for Remington Shotguns

    20ga extension tube nut for Remington 870, 1100, 11-87 shotguns.  This nut will replace your factory magazine cap and allow installation of a 20ga shotgun extension tube.

    NOTE:  This extension will not be compatible with older 1100s that use a 12ga magazine tube.

  • 20ga Extension Nut for Winchester and Browning Autos

    Price: $43.85

    20ga extension tube nut for Winchester SX2/SX3 and Browning Gold/Silver shotguns. This nut will replace your factory magazine cap and allow installation of a 20ga shotgun extension tube.

    20ga Extension Nut for Winchester and Browning Autos

    20ga extension tube nut for Winchester SX2/SX3 and Browning Gold/Silver shotguns. This nut will replace your factory magazine cap and allow installation of a 20ga shotgun extension tube.

  • Beretta 1301 Tactical Barrel Clamp

    Price: $32.81

    The Nordic Components Beretta 1301 Tactical barrel clamp provides extra rigidity for your magazine extension.  Designed with shorter barrel fingers to clear the fixed front sight on the 1301 Tactical.  Features 10-32 threaded hole for mounting Picatinny rails or other accessories.  Designed for Nordic extension tubes (1.060" diameter) but may be compatible with other models.

    Note:  The shotgun barrel clamp makes contact with your barrel and may damage/wear the finish on your barrel with use. We recommend using masking tape applied to the inside of the clamp fingers that contact the barrel to alleviate finish wear. Because we have no control over the installation of this product, Nordic Components is not responsible for any resulting wear or damage. Do not apply anything to the clamp fingers that contact the magazine tube.

    Beretta 1301 Tactical Barrel Clamp

    The Nordic Components Beretta 1301 Tactical barrel clamp provides extra rigidity for your magazine extension.  Designed with shorter barrel fingers to clear the fixed front sight on the 1301 Tactical.  Features 10-32 threaded hole for mounting Picatinny rails or other accessories.  Designed for Nordic extension tubes (1.060" diameter) but may be compatible with other models.

    Note:  The shotgun barrel clamp makes contact with your barrel and may damage/wear the finish on your barrel with use. We recommend using masking tape applied to the inside of the clamp fingers that contact the barrel to alleviate finish wear. Because we have no control over the installation of this product, Nordic Components is not responsible for any resulting wear or damage. Do not apply anything to the clamp fingers that contact the magazine tube.

  • Beretta 1301 Tactical Barrel Clamp with Picatinny Rail

    Price: $45.66

    The Nordic Components Beretta 1301 Tactical barrel clamp provides extra rigidity for your magazine extension.  Designed with shorter barrel fingers to clear the fixed front sight on the 1301 Tactical.  Includes Picatinny rail and mounting screw.  Designed for Nordic extension tubes (1.060" diameter) but may be compatible with other models.

    Note:  The shotgun barrel clamp makes contact with your barrel and may damage/wear the finish on your barrel with use. We recommend using masking tape applied to the inside of the clamp fingers that contact the barrel to alleviate finish wear. Because we have no control over the installation of this product, Nordic Components is not responsible for any resulting wear or damage. Do not apply anything to the clamp fingers that contact the magazine tube.

    Beretta 1301 Tactical Barrel Clamp with Picatinny Rail

    The Nordic Components Beretta 1301 Tactical barrel clamp provides extra rigidity for your magazine extension.  Designed with shorter barrel fingers to clear the fixed front sight on the 1301 Tactical.  Includes Picatinny rail and mounting screw.  Designed for Nordic extension tubes (1.060" diameter) but may be compatible with other models.

    Note:  The shotgun barrel clamp makes contact with your barrel and may damage/wear the finish on your barrel with use. We recommend using masking tape applied to the inside of the clamp fingers that contact the barrel to alleviate finish wear. Because we have no control over the installation of this product, Nordic Components is not responsible for any resulting wear or damage. Do not apply anything to the clamp fingers that contact the magazine tube.

  • Beretta 1301 Tactical MXT Extension Kit

    Rated 5.00 out of 5
    Price: $145.00

    Beretta 1301 extension kit in a single package for Tactical model.

    • Features MXT magazine extension designed exclusively for the 1301 Tactical
    • Beretta 1301 extension increases magazine capacity to 7 rounds (capacity determined with 2 3/4" shells and may vary with shells of differing length)
    • Barrel clamp kit includes 1301 Tactical-exclusive clamp, Picatinny rail, and QDA swivel attachment
    • Utilizes factory magazine spring (spare generic spring included)

     

    Beretta 1301 Tactical MXT Extension Kit

    Beretta 1301 extension kit in a single package for Tactical model.

    • Features MXT magazine extension designed exclusively for the 1301 Tactical
    • Beretta 1301 extension increases magazine capacity to 7 rounds (capacity determined with 2 3/4" shells and may vary with shells of differing length)
    • Barrel clamp kit includes 1301 Tactical-exclusive clamp, Picatinny rail, and QDA swivel attachment
    • Utilizes factory magazine spring (spare generic spring included)

     

  • Extension Tube Springs 12ga/20ga

    Rated 5.00 out of 5
    Price: $12.93$13.43

    Replacement spring for shotgun magazine extensions.

    • Spring has extra length to allow fitting to magazine
    • Ships coiled in package with instructions for determining length and cutting
    • Available in standard and heavy-duty strengths for 12ga, standard strength for 20ga

    Extension Tube Springs 12ga/20ga

    Replacement spring for shotgun magazine extensions.

    • Spring has extra length to allow fitting to magazine
    • Ships coiled in package with instructions for determining length and cutting
    • Available in standard and heavy-duty strengths for 12ga, standard strength for 20ga
  • Heavy-Wall (Mossberg) Barrel Clamp with Picatinny Rail, 12ga.

    Price: $48.69

    The Nordic Components heavy-walled shotgun barrel clamp provides extra rigidity for your magazine extension.  Includes Picatinny rail and mounting screw.  Suitable for use with Mossberg 590/590A1/835/935, Benelli Nova/Supernova, and other shotguns with heavy/overbored barrels or larger barrel-to-magazine offset.

    Not compatible with:

    • Browning Auto-5, Remington Model 11, Savage 720/725, or any other shotguns with reciprocating barrels

    Designed for Nordic extension tubes (1.060" diameter) but may be compatible with other models.

    Note:  The shotgun barrel clamp makes contact with your barrel and may damage/wear the finish on your barrel with use. We recommend using masking tape applied to the inside of the clamp fingers that contact the barrel to alleviate finish wear. Because we have no control over the installation of this product, Nordic Components is not responsible for any resulting wear or damage. Do not apply anything to the clamp fingers that contact the magazine tube.

    Heavy-Wall (Mossberg) Barrel Clamp with Picatinny Rail, 12ga.

    The Nordic Components heavy-walled shotgun barrel clamp provides extra rigidity for your magazine extension.  Includes Picatinny rail and mounting screw.  Suitable for use with Mossberg 590/590A1/835/935, Benelli Nova/Supernova, and other shotguns with heavy/overbored barrels or larger barrel-to-magazine offset.

    Not compatible with:

    • Browning Auto-5, Remington Model 11, Savage 720/725, or any other shotguns with reciprocating barrels

    Designed for Nordic extension tubes (1.060" diameter) but may be compatible with other models.

    Note:  The shotgun barrel clamp makes contact with your barrel and may damage/wear the finish on your barrel with use. We recommend using masking tape applied to the inside of the clamp fingers that contact the barrel to alleviate finish wear. Because we have no control over the installation of this product, Nordic Components is not responsible for any resulting wear or damage. Do not apply anything to the clamp fingers that contact the magazine tube.

  • Heavy-Wall (Mossberg) Barrel Clamp, 12ga

    Price: $35.83

    The Nordic Components heavy-walled shotgun barrel clamp provides extra rigidity for your magazine extension.  Features 10-32 threaded hole for mounting Picatinny rails or other accessories.  Suitable for use with Mossberg 590/590A1/835/935, Benelli Nova/Supernova, and other shotguns with heavy/overbored barrels or larger barrel-to-magazine offset.

    Not compatible with:

    • Browning Auto-5, Remington Model 11, Savage 720/725, or any other shotguns with reciprocating barrels

    Designed for Nordic extension tubes (1.060" diameter) but may be compatible with other models.

    Note:  The shotgun barrel clamp makes contact with your barrel and may damage/wear the finish on your barrel with use. We recommend using masking tape applied to the inside of the clamp fingers that contact the barrel to alleviate finish wear. Because we have no control over the installation of this product, Nordic Components is not responsible for any resulting wear or damage. Do not apply anything to the clamp fingers that contact the magazine tube.

    Heavy-Wall (Mossberg) Barrel Clamp, 12ga

    The Nordic Components heavy-walled shotgun barrel clamp provides extra rigidity for your magazine extension.  Features 10-32 threaded hole for mounting Picatinny rails or other accessories.  Suitable for use with Mossberg 590/590A1/835/935, Benelli Nova/Supernova, and other shotguns with heavy/overbored barrels or larger barrel-to-magazine offset.

    Not compatible with:

    • Browning Auto-5, Remington Model 11, Savage 720/725, or any other shotguns with reciprocating barrels

    Designed for Nordic extension tubes (1.060" diameter) but may be compatible with other models.

    Note:  The shotgun barrel clamp makes contact with your barrel and may damage/wear the finish on your barrel with use. We recommend using masking tape applied to the inside of the clamp fingers that contact the barrel to alleviate finish wear. Because we have no control over the installation of this product, Nordic Components is not responsible for any resulting wear or damage. Do not apply anything to the clamp fingers that contact the magazine tube.

  • Low-drag Shotgun Follower

    Low Drag Shotgun Follower 12ga/20ga

    Rated 4.00 out of 5
    Price: $15.85

    Nordic Components anodized aluminum low-drag shotgun follower

    • Improved design reduces shotgun follower binding or hangups within tube, particularly in transition area between factory magazine and extension
    • Anodized aluminum construction for durability and longevity
    • Red anodization increases shotgun follower visibility for additional safety while checking magazine for ammunition

    Note:  Any spring/follower retention features or devices within the factory magazine tube will need to be removed for function with the Nordic Components follower

    Low Drag Shotgun Follower 12ga/20ga

    Nordic Components anodized aluminum low-drag shotgun follower

    • Improved design reduces shotgun follower binding or hangups within tube, particularly in transition area between factory magazine and extension
    • Anodized aluminum construction for durability and longevity
    • Red anodization increases shotgun follower visibility for additional safety while checking magazine for ammunition

    Note:  Any spring/follower retention features or devices within the factory magazine tube will need to be removed for function with the Nordic Components follower

  • M4 1 piece 7 Round Replacement Tube

    Price: $74.95

    Length 18 1/8"
    Capacity 7+1
    Increases the capacity of Your M4 shotgun by two rounds. made from seamless chrome-moly steel tubing in a matte black color to match the finish of your weapon. Kit includes the tube and correct lenght spring: everything necessary to convert your M4 to 7+1 Capacity

    M4 1 piece 7 Round Replacement Tube

    Length 18 1/8"
    Capacity 7+1
    Increases the capacity of Your M4 shotgun by two rounds. made from seamless chrome-moly steel tubing in a matte black color to match the finish of your weapon. Kit includes the tube and correct lenght spring: everything necessary to convert your M4 to 7+1 Capacity

  • M4 2 Round Extension Tube

    Price: $74.95

    Increases the capacity of Your M4 shotgun by two rounds. The Tube is made from Carbon Steel, black oxide finished. Kit includes the tube and correct lenght spring: everything necessary to convert your M4 to 7+1 Capacity

    M4 2 Round Extension Tube

    Increases the capacity of Your M4 shotgun by two rounds. The Tube is made from Carbon Steel, black oxide finished. Kit includes the tube and correct lenght spring: everything necessary to convert your M4 to 7+1 Capacity

  • MatchSaverz Shotshell Holder

    Price: $24.95

    Keep it HOT with ONE MORE shot! MatchSaverz mount to the side of your shotgun and allow you to quickly slide one last round into the chamber for that all important last shot. This can literally shave seconds off your time. Made of a special plastic that allows the shotshell to slide easily, yet hold it securely. Available in Rocket Red, Blazin' Blue, White Lightning, or Tactical Black.

    MatchSaverz Shotshell Holder

    Keep it HOT with ONE MORE shot! MatchSaverz mount to the side of your shotgun and allow you to quickly slide one last round into the chamber for that all important last shot. This can literally shave seconds off your time. Made of a special plastic that allows the shotshell to slide easily, yet hold it securely. Available in Rocket Red, Blazin' Blue, White Lightning, or Tactical Black.

  • MXT Extension Nut for Benelli M1/M2, SBE/SBE2/SBE3, Breda Autos

    Price: $33.99

    This product adapts the MXT extension tube kit to your shotgun.

    Visit this page for information to ensure you order a complete kit assembly.

    MXT Extension Nut for Benelli M1/M2, SBE/SBE2/SBE3, Breda Autos

    This product adapts the MXT extension tube kit to your shotgun.

    Visit this page for information to ensure you order a complete kit assembly.

  • MXT Extension Nut for Benelli Nova/Super Nova, Beretta, CZ, Weatherby

    Price: $33.99

    This product adapts the MXT extension tube kit to your shotgun.

    Visit this page for information to ensure you order a complete kit assembly.

    MXT Extension Nut for Benelli Nova/Super Nova, Beretta, CZ, Weatherby

    This product adapts the MXT extension tube kit to your shotgun.

    Visit this page for information to ensure you order a complete kit assembly.