Shop

.22LR - 22RB (Dedicated .22 Upper)

  • Black Dog Machine 50 Round Drum Magazine for 22RB Upper

    Price: $59.95

    Black Dog Machine 50 Round Drum Magazine for NC22 Upper

     

    Black Dog Machine 50 Round Drum Magazine for 22RB Upper

    Black Dog Machine 50 Round Drum Magazine for NC22 Upper

     

  • Black Dog Machine X-Form 25 Round Magazine with Nylon feed lips

    Price: $21.49

    BDM X-Form 25 Round Magazine with nylon feed lips for NC22 Upper

     

    Black Dog Machine X-Form 25 Round Magazine with Nylon feed lips

    BDM X-Form 25 Round Magazine with nylon feed lips for NC22 Upper

     

  • Black Dog Sonic X 10 Round Magazine with Nylon feed lip

    Price: $14.99

    BDM X-Form 10 Round Magazine with SS feed lip for NC22 Upper

     

    Black Dog Sonic X 10 Round Magazine with Nylon feed lip

    BDM X-Form 10 Round Magazine with SS feed lip for NC22 Upper

     

  • 22RB Dedicated 22 Upper

    22RB Dedicated 22 Upper

    Rated 5.00 out of 5
    Price: $499.00$499.95

    Nordic Components' 22RB dedicated 22 upper receiver converts your standard AR-15 compatible system to a dedicated .22LR for recreational shooting, training, and hunting.  The 22RB is manufactured using the same materials as most standard AR15 rifles, ensuring that it is a dedicated 22 upper that looks and feels like a centerfire rifle.

    SUPPRESSOR READY!

    The 22RB's match-grade barrel also comes prepared to accept a suppressor - the barrel threads are cut to the proper spec for most popular .22 suppressors, and has a machined tenon to accommodate the O-rings found on certain suppressor models.

    Features:

    • 1-16 twist match barrel
    • A2 flash suppressor
    • Aluminum slim diameter hand guard
    • Aluminum upper
    • Stainless steel bolt
    • 10 round Black Dog magazine
    • Black Dog Machine Bolt Saver for retaining bolt carrier group when upper is separate from lower
    • 9.25 Pistol/SBR upper-all NFA rules apply

    *Will accept all Black Dog AR-15 .22 magazines

    Note: Recommended for use with fire control groups using hammers with mil-spec dimensions only.

    22RB Dedicated 22 Upper

    Nordic Components' 22RB dedicated 22 upper receiver converts your standard AR-15 compatible system to a dedicated .22LR for recreational shooting, training, and hunting.  The 22RB is manufactured using the same materials as most standard AR15 rifles, ensuring that it is a dedicated 22 upper that looks and feels like a centerfire rifle.

    SUPPRESSOR READY!

    The 22RB's match-grade barrel also comes prepared to accept a suppressor - the barrel threads are cut to the proper spec for most popular .22 suppressors, and has a machined tenon to accommodate the O-rings found on certain suppressor models.

    Features:

    • 1-16 twist match barrel
    • A2 flash suppressor
    • Aluminum slim diameter hand guard
    • Aluminum upper
    • Stainless steel bolt
    • 10 round Black Dog magazine
    • Black Dog Machine Bolt Saver for retaining bolt carrier group when upper is separate from lower
    • 9.25 Pistol/SBR upper-all NFA rules apply

    *Will accept all Black Dog AR-15 .22 magazines

    Note: Recommended for use with fire control groups using hammers with mil-spec dimensions only.

.22LR - AR22 (Ruger 10/22) - AR22 Stock Kit

  • AR22 10/22 Stock Kit

    AR22 10/22 Stock Kit with Handguard and Stock

    Price: $374.99

    AR22 10/22 stock kit for converting your Ruger® 10/22®.

    • Machined from lightweight aluminum billet to retain durability and performance without significant increase of weight or bulk
    • Simple three-piece design for easy installation
    • Replaces factory 10/22 stock
    • Converts 10/22 stock pattern over to modular AR-style system
    • Facilitates installation of many AR15-compatible components and accessories
    • Includes stock assembly and your choice of Nordic Components handguards
    • Compatible with 10/22®-pattern receivers with factory barrel or aftermarket barrel up to .930″ diameter
    • Integral Picatinny top rail accommodates scope mounts and other accessories
    • Includes the lower main body, scope mount, forearm adapter, free-float handguard, commerical-spec buttstock assembly, Nordic Components Gapper, mounting hardware and instructions

    Note:  Not compatible with any 10/22 takedown models

    AR22 10/22 Stock Kit with Handguard and Stock

    AR22 10/22 stock kit for converting your Ruger® 10/22®.

    • Machined from lightweight aluminum billet to retain durability and performance without significant increase of weight or bulk
    • Simple three-piece design for easy installation
    • Replaces factory 10/22 stock
    • Converts 10/22 stock pattern over to modular AR-style system
    • Facilitates installation of many AR15-compatible components and accessories
    • Includes stock assembly and your choice of Nordic Components handguards
    • Compatible with 10/22®-pattern receivers with factory barrel or aftermarket barrel up to .930″ diameter
    • Integral Picatinny top rail accommodates scope mounts and other accessories
    • Includes the lower main body, scope mount, forearm adapter, free-float handguard, commerical-spec buttstock assembly, Nordic Components Gapper, mounting hardware and instructions

    Note:  Not compatible with any 10/22 takedown models

  • AR22 10/22 3-piece Stock Kit

    AR22 3-Piece 10/22 Stock Kit for Ruger® 10/22®

    Price: $253.11

    AR22 stock kit for converting your Ruger 10/22®.

    • Machined from lightweight aluminum billet to retain durability and performance without significant increase of weight or bulk
    • Simple three-piece design for easy installation
    • Replaces factory 10/22 stock
    • Converts 10/22 stock pattern over to modular AR-style system
    • Compatible with 10/22®-pattern receivers with factory barrel or aftermarket barrel up to .930" diameter
    • Integral Picatinny top rail accommodates scope mounts and other accessories
    • Accepts standard AR15-pattern free-float handguard, pistol grip, and stock assembly.
    • Includes the lower main body, scope mount, forearm adapter, Nordic Components Gapper, mounting hardware and instructions.

    *Product includes only what is listed in description.  Photos may show additional accessories not included in this kit

     

    NOTE:  Not compatible with any 10/22 takedown models.  Handguards with rear protrusions (anti rotation tabs, etc.) will not be compatible with the AR22 chassis.

    AR22 3-Piece 10/22 Stock Kit for Ruger® 10/22®

    AR22 stock kit for converting your Ruger 10/22®.

    • Machined from lightweight aluminum billet to retain durability and performance without significant increase of weight or bulk
    • Simple three-piece design for easy installation
    • Replaces factory 10/22 stock
    • Converts 10/22 stock pattern over to modular AR-style system
    • Compatible with 10/22®-pattern receivers with factory barrel or aftermarket barrel up to .930" diameter
    • Integral Picatinny top rail accommodates scope mounts and other accessories
    • Accepts standard AR15-pattern free-float handguard, pistol grip, and stock assembly.
    • Includes the lower main body, scope mount, forearm adapter, Nordic Components Gapper, mounting hardware and instructions.

    *Product includes only what is listed in description.  Photos may show additional accessories not included in this kit

     

    NOTE:  Not compatible with any 10/22 takedown models.  Handguards with rear protrusions (anti rotation tabs, etc.) will not be compatible with the AR22 chassis.

  • Gapper for AR22 Stock Kit

    Price: $9.45

    Molded rubber components to fill space between trigger guard and grip on Nordic Components AR22 kit.

    Gapper for AR22 Stock Kit

    Molded rubber components to fill space between trigger guard and grip on Nordic Components AR22 kit.

.22LR - AR22 (Ruger 10/22) - AR22 Accessories

  • AR22 10/22 3-piece Stock Kit

    AR22 3-Piece 10/22 Stock Kit for Ruger® 10/22®

    Price: $253.11

    AR22 stock kit for converting your Ruger 10/22®.

    • Machined from lightweight aluminum billet to retain durability and performance without significant increase of weight or bulk
    • Simple three-piece design for easy installation
    • Replaces factory 10/22 stock
    • Converts 10/22 stock pattern over to modular AR-style system
    • Compatible with 10/22®-pattern receivers with factory barrel or aftermarket barrel up to .930" diameter
    • Integral Picatinny top rail accommodates scope mounts and other accessories
    • Accepts standard AR15-pattern free-float handguard, pistol grip, and stock assembly.
    • Includes the lower main body, scope mount, forearm adapter, Nordic Components Gapper, mounting hardware and instructions.

    *Product includes only what is listed in description.  Photos may show additional accessories not included in this kit

     

    NOTE:  Not compatible with any 10/22 takedown models.  Handguards with rear protrusions (anti rotation tabs, etc.) will not be compatible with the AR22 chassis.

    AR22 3-Piece 10/22 Stock Kit for Ruger® 10/22®

    AR22 stock kit for converting your Ruger 10/22®.

    • Machined from lightweight aluminum billet to retain durability and performance without significant increase of weight or bulk
    • Simple three-piece design for easy installation
    • Replaces factory 10/22 stock
    • Converts 10/22 stock pattern over to modular AR-style system
    • Compatible with 10/22®-pattern receivers with factory barrel or aftermarket barrel up to .930" diameter
    • Integral Picatinny top rail accommodates scope mounts and other accessories
    • Accepts standard AR15-pattern free-float handguard, pistol grip, and stock assembly.
    • Includes the lower main body, scope mount, forearm adapter, Nordic Components Gapper, mounting hardware and instructions.

    *Product includes only what is listed in description.  Photos may show additional accessories not included in this kit

     

    NOTE:  Not compatible with any 10/22 takedown models.  Handguards with rear protrusions (anti rotation tabs, etc.) will not be compatible with the AR22 chassis.

  • Gapper for AR22 Stock Kit

    Price: $9.45

    Molded rubber components to fill space between trigger guard and grip on Nordic Components AR22 kit.

    Gapper for AR22 Stock Kit

    Molded rubber components to fill space between trigger guard and grip on Nordic Components AR22 kit.

  • High Rise Scope Mount for 10/22

    Price: $39.95

    High-rise scope mount for 10/22 pattern rifles.

    • Provides 3/4" rise for mounting optics on rifles with adjustable or raised combs
    • Compatible with any factory or aftermarket stock
    • Use with Nordic Components front sight block to accommodate use of AR-style front and rear sights

     

    High Rise Scope Mount for 10/22

    High-rise scope mount for 10/22 pattern rifles.

    • Provides 3/4" rise for mounting optics on rifles with adjustable or raised combs
    • Compatible with any factory or aftermarket stock
    • Use with Nordic Components front sight block to accommodate use of AR-style front and rear sights

     

  • NC-1 Free Float Hand Guards

    Rated 5.00 out of 5
    Price: $79.90$94.55

    Nordic Components free float tube-style handguard.

    • Fits all mil-spec AR15-pattern upper receivers
    • Free-float rigidity in a lightweight package
    • 10-32 tapped holes provide mounting points for Picatinny rails or other accessories (holes spaced 1 3/4" apart)
    • Reduces weight by eliminating fixed Picatinny rails
    • 2" outside diameter
    • 1 3/4" inside diameter
    • Machined from 6061 aluminum
    • Includes barrel nut, locking ring, and instructions for installation

    NC-1 Free Float Hand Guards

    Nordic Components free float tube-style handguard.

    • Fits all mil-spec AR15-pattern upper receivers
    • Free-float rigidity in a lightweight package
    • 10-32 tapped holes provide mounting points for Picatinny rails or other accessories (holes spaced 1 3/4" apart)
    • Reduces weight by eliminating fixed Picatinny rails
    • 2" outside diameter
    • 1 3/4" inside diameter
    • Machined from 6061 aluminum
    • Includes barrel nut, locking ring, and instructions for installation
  • NC-2 Free Float Hand Guards

    Rated 5.00 out of 5
    Price: $94.95$104.95

    Nordic Components textured free float tube-style handguard.

    • Same strength and weight reduction as our NC-1 handguard with additional machined texturing for increased grip
    • Fits all mil-spec AR15-pattern upper receivers
    • Free-float rigidity in a lightweight package
    • 10-32 tapped holes provide mounting points for Picatinny rails or other accessories (holes spaced 1 3/4″ apart)
    • Reduces weight by eliminating fixed Picatinny rails
    • 2″ outside diameter
    • 1 3/4″ inside diameter
    • Machined from 6061 aluminum
    • Includes barrel nut, locking ring, and instructions for installation

    NC-2 Free Float Hand Guards

    Nordic Components textured free float tube-style handguard.

    • Same strength and weight reduction as our NC-1 handguard with additional machined texturing for increased grip
    • Fits all mil-spec AR15-pattern upper receivers
    • Free-float rigidity in a lightweight package
    • 10-32 tapped holes provide mounting points for Picatinny rails or other accessories (holes spaced 1 3/4″ apart)
    • Reduces weight by eliminating fixed Picatinny rails
    • 2″ outside diameter
    • 1 3/4″ inside diameter
    • Machined from 6061 aluminum
    • Includes barrel nut, locking ring, and instructions for installation
  • NC-3 Free Float Hand Guards

    Price: $165.00$225.00

    Nordic Components slim diameter free float M-LOK-compatible handguard.

    • Fits all mil-spec AR15-pattern upper receivers
    • Free-float rigidity in a lightweight package
    • Continuous top rail for mounting optics and other accessories
    • M-LOK slots provide modularity without unnecessary weight increase
    • Reduces weight by eliminating fixed Picatinny rails on sides and bottom
    • Machined from 6061 aluminum
    • Includes hardware and installation instructions
    • Available in midlength, rifle length, and XL length

    NC-3 Free Float Hand Guards

    Nordic Components slim diameter free float M-LOK-compatible handguard.

    • Fits all mil-spec AR15-pattern upper receivers
    • Free-float rigidity in a lightweight package
    • Continuous top rail for mounting optics and other accessories
    • M-LOK slots provide modularity without unnecessary weight increase
    • Reduces weight by eliminating fixed Picatinny rails on sides and bottom
    • Machined from 6061 aluminum
    • Includes hardware and installation instructions
    • Available in midlength, rifle length, and XL length
  • QDA Plate for Rifle Handguards

    Price: $19.91

    QDA plate for 2" diameter handguards.

    • Mounting point for quick-detach push button-style sling swivels
    • Designed for Nordic Components NC1 and NC2 handguards
    • Compatible with any 2" diameter handguard with #10-32 tapped holes
    • Includes only attachment plate and #10-32 x 1/2" screw (no swivel included)

     

     

     

    QDA Plate for Rifle Handguards

    QDA plate for 2" diameter handguards.

    • Mounting point for quick-detach push button-style sling swivels
    • Designed for Nordic Components NC1 and NC2 handguards
    • Compatible with any 2" diameter handguard with #10-32 tapped holes
    • Includes only attachment plate and #10-32 x 1/2" screw (no swivel included)

     

     

     

  • Small Diameter Hand Guard Assembly Wrench

    Price: $9.95

    Assembly/Disassembly Wrench for the NC Small Diameter Hand Guard.

    Small Diameter Hand Guard Assembly Wrench

    Assembly/Disassembly Wrench for the NC Small Diameter Hand Guard.

  • Speed Magazine Release Lever for 10/22®

    Rated 5.00 out of 5
    Price: $27.95

    Enhanced magazine release for 10/22® pattern rifles.

    • Simplifies and speeds releasing the magazine from 10/22® rifles
    • Useful addition to Nordic Components AR22 stock kit or other 10/22® chassis
    • Allows user to release magazine without removing hand from grip

    This magazine speed lever will fit any 10/22® or clones. Quickly release the magazine with the push of your index finger. Works great with our AR22 Stock Kit. Does not interfere with hand grip.

    Speed Magazine Release Lever for 10/22®

    Enhanced magazine release for 10/22® pattern rifles.

    • Simplifies and speeds releasing the magazine from 10/22® rifles
    • Useful addition to Nordic Components AR22 stock kit or other 10/22® chassis
    • Allows user to release magazine without removing hand from grip

    This magazine speed lever will fit any 10/22® or clones. Quickly release the magazine with the push of your index finger. Works great with our AR22 Stock Kit. Does not interfere with hand grip.

.22LR - AR22 (Ruger 10/22) - AR22 Furniture

  • AR22 10/22 3-piece Stock Kit

    AR22 3-Piece 10/22 Stock Kit for Ruger® 10/22®

    Price: $253.11

    AR22 stock kit for converting your Ruger 10/22®.

    • Machined from lightweight aluminum billet to retain durability and performance without significant increase of weight or bulk
    • Simple three-piece design for easy installation
    • Replaces factory 10/22 stock
    • Converts 10/22 stock pattern over to modular AR-style system
    • Compatible with 10/22®-pattern receivers with factory barrel or aftermarket barrel up to .930" diameter
    • Integral Picatinny top rail accommodates scope mounts and other accessories
    • Accepts standard AR15-pattern free-float handguard, pistol grip, and stock assembly.
    • Includes the lower main body, scope mount, forearm adapter, Nordic Components Gapper, mounting hardware and instructions.

    *Product includes only what is listed in description.  Photos may show additional accessories not included in this kit

     

    NOTE:  Not compatible with any 10/22 takedown models.  Handguards with rear protrusions (anti rotation tabs, etc.) will not be compatible with the AR22 chassis.

    AR22 3-Piece 10/22 Stock Kit for Ruger® 10/22®

    AR22 stock kit for converting your Ruger 10/22®.

    • Machined from lightweight aluminum billet to retain durability and performance without significant increase of weight or bulk
    • Simple three-piece design for easy installation
    • Replaces factory 10/22 stock
    • Converts 10/22 stock pattern over to modular AR-style system
    • Compatible with 10/22®-pattern receivers with factory barrel or aftermarket barrel up to .930" diameter
    • Integral Picatinny top rail accommodates scope mounts and other accessories
    • Accepts standard AR15-pattern free-float handguard, pistol grip, and stock assembly.
    • Includes the lower main body, scope mount, forearm adapter, Nordic Components Gapper, mounting hardware and instructions.

    *Product includes only what is listed in description.  Photos may show additional accessories not included in this kit

     

    NOTE:  Not compatible with any 10/22 takedown models.  Handguards with rear protrusions (anti rotation tabs, etc.) will not be compatible with the AR22 chassis.

  • Gapper for AR22 Stock Kit

    Price: $9.45

    Molded rubber components to fill space between trigger guard and grip on Nordic Components AR22 kit.

    Gapper for AR22 Stock Kit

    Molded rubber components to fill space between trigger guard and grip on Nordic Components AR22 kit.

  • Small Diameter Hand Guard Assembly Wrench

    Price: $9.95

    Assembly/Disassembly Wrench for the NC Small Diameter Hand Guard.

    Small Diameter Hand Guard Assembly Wrench

    Assembly/Disassembly Wrench for the NC Small Diameter Hand Guard.

  • Speed Magazine Release Lever for 10/22®

    Rated 5.00 out of 5
    Price: $27.95

    Enhanced magazine release for 10/22® pattern rifles.

    • Simplifies and speeds releasing the magazine from 10/22® rifles
    • Useful addition to Nordic Components AR22 stock kit or other 10/22® chassis
    • Allows user to release magazine without removing hand from grip

    This magazine speed lever will fit any 10/22® or clones. Quickly release the magazine with the push of your index finger. Works great with our AR22 Stock Kit. Does not interfere with hand grip.

    Speed Magazine Release Lever for 10/22®

    Enhanced magazine release for 10/22® pattern rifles.

    • Simplifies and speeds releasing the magazine from 10/22® rifles
    • Useful addition to Nordic Components AR22 stock kit or other 10/22® chassis
    • Allows user to release magazine without removing hand from grip

    This magazine speed lever will fit any 10/22® or clones. Quickly release the magazine with the push of your index finger. Works great with our AR22 Stock Kit. Does not interfere with hand grip.

Clearance

Individual prices are shown for each product variation-NOT ALL ITEMS ARE DISCOUNTED

  • Sale!

    .300 Blackout Barrels

    Price: $112.50$134.50
    • 1-8″ twist rate
    • Machined from 416 stainless match-grade blank
    • M4 feed ramps
    • Pistol-length (10.5″) or carbine-length (16″) gas port
    • Cryogenically treated
    • Black Teflon finish
    • 5/8x24" threaded muzzle

    .300 Blackout Barrels

    • 1-8″ twist rate
    • Machined from 416 stainless match-grade blank
    • M4 feed ramps
    • Pistol-length (10.5″) or carbine-length (16″) gas port
    • Cryogenically treated
    • Black Teflon finish
    • 5/8x24" threaded muzzle
  • 18″ .223 Remington Barrel

    Price: $145.00

    Wring every last ounce of accuracy out of your rifle with the Nordic Components 18" .223 Remington barrel.  This barrel sports the same quality and performance for which our .223 Wylde barrels are known, but features a dedicated .223 Remington chamber for maximum performance in a varmint or target rifle.

    Length: 18"

    Material: 416 Stainless

    Chamber: .223 Remington

    Twist rate: 1:8

    Gas port: Rifle-length

    Muzzle threads: 1/2-28

    18″ .223 Remington Barrel

    Wring every last ounce of accuracy out of your rifle with the Nordic Components 18" .223 Remington barrel.  This barrel sports the same quality and performance for which our .223 Wylde barrels are known, but features a dedicated .223 Remington chamber for maximum performance in a varmint or target rifle.

    Length: 18"

    Material: 416 Stainless

    Chamber: .223 Remington

    Twist rate: 1:8

    Gas port: Rifle-length

    Muzzle threads: 1/2-28

  • Sale!

    7.62×39 M4 Profile Barrel

    Price: $258.00 $65.00

    Green Mountain 7.62x39 barrels are made to M4 profile with a carbine length gas port, a chrome-lined bore, a durable phosphate finish, and - above all - great value.

    Length: 16"

    Material: 4150 steel

    Twist rate: 1:10"

    Finish: Manganese phosphate, chrome-lined bore

    Muzzle threads: 5/8x24

     

    7.62×39 M4 Profile Barrel

    Green Mountain 7.62x39 barrels are made to M4 profile with a carbine length gas port, a chrome-lined bore, a durable phosphate finish, and - above all - great value.

    Length: 16"

    Material: 4150 steel

    Twist rate: 1:10"

    Finish: Manganese phosphate, chrome-lined bore

    Muzzle threads: 5/8x24

     

  • Low-drag Shotgun Follower

    Low Drag Shotgun Follower 12ga/20ga

    Rated 4.00 out of 5
    Price: $15.85

    Nordic Components anodized aluminum low-drag shotgun follower

    • Improved design reduces shotgun follower binding or hangups within tube, particularly in transition area between factory magazine and extension
    • Anodized aluminum construction for durability and longevity
    • Red anodization increases shotgun follower visibility for additional safety while checking magazine for ammunition

    Note:  Any spring/follower retention features or devices within the factory magazine tube will need to be removed for function with the Nordic Components follower

    Low Drag Shotgun Follower 12ga/20ga

    Nordic Components anodized aluminum low-drag shotgun follower

    • Improved design reduces shotgun follower binding or hangups within tube, particularly in transition area between factory magazine and extension
    • Anodized aluminum construction for durability and longevity
    • Red anodization increases shotgun follower visibility for additional safety while checking magazine for ammunition

    Note:  Any spring/follower retention features or devices within the factory magazine tube will need to be removed for function with the Nordic Components follower

  • Sale!

    M-Lok Accessories

    Price: $9.47$29.93

    Nordic Component M-Lok accessories were designed for use with all M-LOK compatible handguards. M-LOK aluminum rail/QD sections allow the attachment of various mounted accessories. All hardware necessary for attachment directly to M-LOK slots is included

    M-Lok Accessories

    Nordic Component M-Lok accessories were designed for use with all M-LOK compatible handguards. M-LOK aluminum rail/QD sections allow the attachment of various mounted accessories. All hardware necessary for attachment directly to M-LOK slots is included

  • NC15 Extruded Upper Receiver

    Rated 5.00 out of 5
    Price: $79.89

    Nordic Components AR15-pattern upper receiver.

    • Slick-side upper receiver eliminates dust cover and forward assist for reduced weight and cleaner lines
    • Compatible with mil-spec bolt carrier groups, charging handles, and handguards
    • Flat-top Picatinny rail accommodates mounting optics or other accessories
    • 7029-T6 aluminum
    • 10 oz. weight

    NC15 Extruded Upper Receiver

    Nordic Components AR15-pattern upper receiver.

    • Slick-side upper receiver eliminates dust cover and forward assist for reduced weight and cleaner lines
    • Compatible with mil-spec bolt carrier groups, charging handles, and handguards
    • Flat-top Picatinny rail accommodates mounting optics or other accessories
    • 7029-T6 aluminum
    • 10 oz. weight
  • Shotgun Extension Tube End Cap 12ga/20ga

    Price: $15.85

    Machined aluminum end cap for Nordic Components MXT shotgun magazine extensions.

    Shotgun Extension Tube End Cap 12ga/20ga

    Machined aluminum end cap for Nordic Components MXT shotgun magazine extensions.

  • Shotgun Extension Tube Kit, 20ga.

    Price: $75.60

    Nordic Components shotgun magazine extension tube kit for increasing magazine capacity.  Used in conjunction with the 20 gauge extension tube nut, this tube kit will add the listed number of rounds to your existing magazine capacity.  All capacities are measured using 2.75" star-crimped shells; for use with 3" or 3.5", increase your selection by one or two rounds.

    Kits ship with extension tube, tube cap, and full-length spring (+1 tubes have an integral cap and will not include a separate cap).   To determine the length of the extension in relation to your shotgun, reference the measurement diagram and dimension table below.  Note that the tube nut will add between .750" and 1.000" depending on the shotgun model.

    THIS PRODUCT REQUIRES AN 20GA EXTENSION TUBE NUT TO BE INSTALLED ON YOUR SHOTGUN -- THIS TUBE KIT WILL NOT ATTACH WITHOUT THE NUT

     

    Barrel_Ext_Measurement_Illustration

    Note:  May require modification of shotgun for installation and/or proper function.  Any spring/follower retention devices will have to be removed to allow extension to function.

    Attention Washington, D.C. Residents: We will not ship any magazine tube extension or magazine extension tube component into, Washington D.C. due to current regulations.

    Shotgun Extension Tube Kit, 20ga.

    Nordic Components shotgun magazine extension tube kit for increasing magazine capacity.  Used in conjunction with the 20 gauge extension tube nut, this tube kit will add the listed number of rounds to your existing magazine capacity.  All capacities are measured using 2.75" star-crimped shells; for use with 3" or 3.5", increase your selection by one or two rounds.

    Kits ship with extension tube, tube cap, and full-length spring (+1 tubes have an integral cap and will not include a separate cap).   To determine the length of the extension in relation to your shotgun, reference the measurement diagram and dimension table below.  Note that the tube nut will add between .750" and 1.000" depending on the shotgun model.

    THIS PRODUCT REQUIRES AN 20GA EXTENSION TUBE NUT TO BE INSTALLED ON YOUR SHOTGUN -- THIS TUBE KIT WILL NOT ATTACH WITHOUT THE NUT

     

    Barrel_Ext_Measurement_Illustration

    Note:  May require modification of shotgun for installation and/or proper function.  Any spring/follower retention devices will have to be removed to allow extension to function.

    Attention Washington, D.C. Residents: We will not ship any magazine tube extension or magazine extension tube component into, Washington D.C. due to current regulations.

  • Sale!

    Shotgun Extension, Tube Only, 20ga.

    Price: $16.60

    Nordic Components MXT extension tube for 20 gauge shotguns.

    • Available in variety of lengths between +4 and +7 (shell capacity measured with 2 3/4″ shells and may vary with shells of differing length)
    • Includes ONLY MXT tube
    • May require purchase of new magazine spring if you are changing the capacity of your existing extension

    Barrel_Ext_Measurement_Illustration

    *Some shotgun magazine tubes may require minor modification. Call us if you are having problems fitting our extension tubes to your shotgun.

    Attention Washington D.C. Residents: We will not ship any magazine tube extension or magazine extension tube component into Washington D.C. due to current regulations.

    Shotgun Extension, Tube Only, 20ga.

    Nordic Components MXT extension tube for 20 gauge shotguns.

    • Available in variety of lengths between +4 and +7 (shell capacity measured with 2 3/4″ shells and may vary with shells of differing length)
    • Includes ONLY MXT tube
    • May require purchase of new magazine spring if you are changing the capacity of your existing extension

    Barrel_Ext_Measurement_Illustration

    *Some shotgun magazine tubes may require minor modification. Call us if you are having problems fitting our extension tubes to your shotgun.

    Attention Washington D.C. Residents: We will not ship any magazine tube extension or magazine extension tube component into Washington D.C. due to current regulations.

Complete Lowers

  • Sale!

    NC-15 Complete Lower

    Rated 3.00 out of 5
    Price: $1,624.00 $180.00

    A COPY OF THE RECEIVING FFL MUST BE SENT TO FFL@NORDICCOMP.COM UPON ORDER PLACEMENT.

    FFL information must include order number and customer name.  Orders will be held until receipt of a valid FFL.

    LOWER:

    • Lower Receiver: NC15 forged lower receiver
    • Bolt Catch: Mil-Spec
    • Magazine Release: Mil-Spec
    • Fire Control Group: Mil-Spec
    • Trigger Guard: Magpul MOE Polymer
    • Grip: Magpul MOE
    • Buffer: Standard carbine
    • Buffer Tube: Mil-spec 6-position
    • Stock: Magpul CTR mil-spec

    *All serialized items must be sent to an FFL dealer

    NC-15 Complete Lower

    A COPY OF THE RECEIVING FFL MUST BE SENT TO FFL@NORDICCOMP.COM UPON ORDER PLACEMENT.

    FFL information must include order number and customer name.  Orders will be held until receipt of a valid FFL.

    LOWER:

    • Lower Receiver: NC15 forged lower receiver
    • Bolt Catch: Mil-Spec
    • Magazine Release: Mil-Spec
    • Fire Control Group: Mil-Spec
    • Trigger Guard: Magpul MOE Polymer
    • Grip: Magpul MOE
    • Buffer: Standard carbine
    • Buffer Tube: Mil-spec 6-position
    • Stock: Magpul CTR mil-spec

    *All serialized items must be sent to an FFL dealer

Pistol Caliber Carbine Components

  • 9mm Barrels

    Price: $141.64$197.87
    • 1-10″ twist rate
    • Machined from 416 stainless blank
    • Pistol-length (8.5″) or carbine-length (16″)
    • Black Teflon finish
    • 1/2×28″ threaded muzzle

    9mm Barrels

    • 1-10″ twist rate
    • Machined from 416 stainless blank
    • Pistol-length (8.5″) or carbine-length (16″)
    • Black Teflon finish
    • 1/2×28″ threaded muzzle
  • NC9 9mm Bolt Assembly w/ Buffer and Spring

    Price: $250.70

    Available two piece design with addition bolt tail options coming soon.

    • 416 Stainless Steel
    • High energy polish for ease of cleaning
    • Properly torqued/staked carrier key fasteners
    • Includes buffer and spring

    NC9 9mm Bolt Assembly w/ Buffer and Spring

    Available two piece design with addition bolt tail options coming soon.

    • 416 Stainless Steel
    • High energy polish for ease of cleaning
    • Properly torqued/staked carrier key fasteners
    • Includes buffer and spring
  • NCPCC Lower Receiver

    Rated 4.00 out of 5
    Price: $395.14

    A COPY OF THE RECEIVING FFL MUST BE SENT TO FFL@NORDICCOMP.COM UPON ORDER PLACEMENT.

    FFL information must include order number and customer name.  Orders will be held until receipt of a valid FFL.

    Now available for the shooter who wants to assemble and configure the NCPCC from the ground up, the NCPCC lower receiver assembly includes the receiver, one magwell of your choice, and all the proprietary components.  You will not need bolt catch/plunger/spring and trigger guard.  The NCPCC lower receiver is compatible with most standard AR-pattern components and accessories, and features the same modularity for which the complete firearm is known.

     

    NCPCC Lower Receiver

    A COPY OF THE RECEIVING FFL MUST BE SENT TO FFL@NORDICCOMP.COM UPON ORDER PLACEMENT.

    FFL information must include order number and customer name.  Orders will be held until receipt of a valid FFL.

    Now available for the shooter who wants to assemble and configure the NCPCC from the ground up, the NCPCC lower receiver assembly includes the receiver, one magwell of your choice, and all the proprietary components.  You will not need bolt catch/plunger/spring and trigger guard.  The NCPCC lower receiver is compatible with most standard AR-pattern components and accessories, and features the same modularity for which the complete firearm is known.

     

  • NCPCC Magwells

    Price: $149.57

    Interchangeable magwell options for the NCPCC modular carbine. Options currently available for Glock small-frame (9mm) and M&P 9mm magazines, with other calibers and options coming soon.

    MAGWELL:

    Magwell: NCPCC 7075 Billet
    Magazine Release: NC 7075 Billet
    Magazine specific bolt catch lifter

    NCPCC Magwells

    Interchangeable magwell options for the NCPCC modular carbine. Options currently available for Glock small-frame (9mm) and M&P 9mm magazines, with other calibers and options coming soon.

    MAGWELL:

    Magwell: NCPCC 7075 Billet
    Magazine Release: NC 7075 Billet
    Magazine specific bolt catch lifter

  • NCT3 Compensators

    Rated 4.00 out of 5
    Price: $68.96$86.43

    The all-new NCT3 compensator, designed to eliminate recoil and muzzle climb while being tailored to your exact requirements.  Available for .223, 9mm or .308 bore diameters.

    • Two chambers divert blast to the sides, reducing in-line recoil, while three vertical high-pressure ports prevent muzzle climb (.223/.308)
    • Two horizontal ports on the .223/.308 are threaded to allow set screw installation, allowing the shooter to optimize the compensator for right- or left-handed shooting (one screw included)
    • Black nitride finished for durability and corrosion resistance
    • .223 and 9mm threaded 1/2x28, .308 threaded 5/8x24
    • Includes crush washer

    NCT3 Compensators

    The all-new NCT3 compensator, designed to eliminate recoil and muzzle climb while being tailored to your exact requirements.  Available for .223, 9mm or .308 bore diameters.

    • Two chambers divert blast to the sides, reducing in-line recoil, while three vertical high-pressure ports prevent muzzle climb (.223/.308)
    • Two horizontal ports on the .223/.308 are threaded to allow set screw installation, allowing the shooter to optimize the compensator for right- or left-handed shooting (one screw included)
    • Black nitride finished for durability and corrosion resistance
    • .223 and 9mm threaded 1/2x28, .308 threaded 5/8x24
    • Includes crush washer
  • NCT3 Flash Hiders

    Price: $68.96$79.65

    Nordic's standard closed-face three-prong flash suppressor, as used on the NC15/NC10/NCPCC rifles.

     

    • Machined from 4140 pre-hardened steel
    • Black nitride finished for corrosion resistance and durability
    • Closed face to eliminate prong ring
    • .223 and 9mm flash hider threaded for 1/2-28 barrels
    • .308 flash hider threaded for 5/8-24 barrels
    • Includes crush washer

    NCT3 Flash Hiders

    Nordic's standard closed-face three-prong flash suppressor, as used on the NC15/NC10/NCPCC rifles.

     

    • Machined from 4140 pre-hardened steel
    • Black nitride finished for corrosion resistance and durability
    • Closed face to eliminate prong ring
    • .223 and 9mm flash hider threaded for 1/2-28 barrels
    • .308 flash hider threaded for 5/8-24 barrels
    • Includes crush washer

Rifle - AR-10 Components

  • .308 Winchester Barrels

    Price: $312.11$314.46
    • 1-10″ twist rate
    • Machined from 416 stainless match-grade blank
    • Mid-length (16″ lightweight) or rifle-length (16" heavy barrel, 18", 20") gas port
    • Cryogenically treated
    • Black Teflon finish
    • 5/8"x24 threaded muzzle
    • We recommend utilizing an adjustable gas block
      • 16"LW-.078 gas port
      • 16"H-.102 gas port
      • 18" LW-.102 gas port
      • 20" H-.098 gas port

    16" lightweight barrel pictured

    .308 Winchester Barrels

    • 1-10″ twist rate
    • Machined from 416 stainless match-grade blank
    • Mid-length (16″ lightweight) or rifle-length (16" heavy barrel, 18", 20") gas port
    • Cryogenically treated
    • Black Teflon finish
    • 5/8"x24 threaded muzzle
    • We recommend utilizing an adjustable gas block
      • 16"LW-.078 gas port
      • 16"H-.102 gas port
      • 18" LW-.102 gas port
      • 20" H-.098 gas port

    16" lightweight barrel pictured

  • AR-10 Charging Handle

    Price: $36.32

    The same quality and precision of our AR-15 charging handles in an up-scaled version for your .308, 6.5 Creedmoor, or other AR-10 platform rifle.

    • Black anodized finish
    • Standard release latch

    AR-10 Charging Handle

    The same quality and precision of our AR-15 charging handles in an up-scaled version for your .308, 6.5 Creedmoor, or other AR-10 platform rifle.

    • Black anodized finish
    • Standard release latch
  • Bolt Carrier Groups

    Price: $125.00$199.00

    Nordic bolt carrier groups for NC-10 (AR-10 platform) and NC-15 (AR-15 platform) uppers and rifles.

    • Slabside full-mass carriers machined from 8620 steel
    • Carriers and bolts black nitride finished for increased wear-resistance and durability
    • Bolts machined from 9310 steel, shot peened, and magnetic particle inspected
    • Properly torqued/staked gas key fasteners

    Bolt Carrier Groups

    Nordic bolt carrier groups for NC-10 (AR-10 platform) and NC-15 (AR-15 platform) uppers and rifles.

    • Slabside full-mass carriers machined from 8620 steel
    • Carriers and bolts black nitride finished for increased wear-resistance and durability
    • Bolts machined from 9310 steel, shot peened, and magnetic particle inspected
    • Properly torqued/staked gas key fasteners
  • Gas Tube for AR10/AR15, Carbine-length

    Price: $13.95

    Gas tube for AR10/AR15, Carbine-length.

    Gas Tube for AR10/AR15, Carbine-length

    Gas tube for AR10/AR15, Carbine-length.

  • Gas Tube for AR10/AR15, Mid-length

    Price: $13.95

    For use with our Lilja and Wilson mid-length gas system barrels

    Gas Tube for AR10/AR15, Mid-length

    For use with our Lilja and Wilson mid-length gas system barrels

  • Gas Tube for AR10/AR15, Rifle-length

    Price: $13.95

    For use with any Rifle-length gas system barrels.

    Gas Tube for AR10/AR15, Rifle-length

    For use with any Rifle-length gas system barrels.

  • Hiperfire HIPERTOUCH 24

    Price: $175.75

    The HIPERTOUCH® 24 fire-control drop-in is a high performance service rifle upgrade that installs in AR-15 and AR-10 type rifles.

    • Service rifle-style upgraded trigger provides enhanced pull characteristics while retaining drop safety (ANSI/SAAMI and ITOP drop force compliant)
    • Maintains mil-spec travel length with smoother pull
    • Uses stock AR-pattern trigger and semi-automatic disconnector springs with proprietary trigger, hammer, and disconnector components
    • Proprietary toggle-over-center spring system allows for lighter trigger pull without compromising hammer strike force
    • Curved trigger bow replicates traditional AR trigger feel
    • Trigger pull weight easily adjusted by shooter between 2-4 lbs
    • Installs without removal of the safety selector or modification to lower receiver

    Hiperfire HIPERTOUCH 24

    The HIPERTOUCH® 24 fire-control drop-in is a high performance service rifle upgrade that installs in AR-15 and AR-10 type rifles.

    • Service rifle-style upgraded trigger provides enhanced pull characteristics while retaining drop safety (ANSI/SAAMI and ITOP drop force compliant)
    • Maintains mil-spec travel length with smoother pull
    • Uses stock AR-pattern trigger and semi-automatic disconnector springs with proprietary trigger, hammer, and disconnector components
    • Proprietary toggle-over-center spring system allows for lighter trigger pull without compromising hammer strike force
    • Curved trigger bow replicates traditional AR trigger feel
    • Trigger pull weight easily adjusted by shooter between 2-4 lbs
    • Installs without removal of the safety selector or modification to lower receiver
  • Hiperfire HIPERTOUCH 24 3G Competition

    Price: $213.75

    The HIPERTOUCH® 24 3Gun (24 3G) curved bow competition trigger.

    Hiperfire HIPERTOUCH 24 3G Competition

    The HIPERTOUCH® 24 3Gun (24 3G) curved bow competition trigger.

  • Hiperfire HIPERTOUCH 24Competition

    Price: $223.25

    The HIPERTOUCH® 24C is Hiperfire's competition version of fire-control drop-ins for installation in AR-15® and AR-10® type rifles.

    • Short travel and reset facilitate high speed shooting without sacrificing accuracy
    • Flat bow trigger compatible with included HIPERSHOE™ adjustable finger pad allows for fast and repeatable finger location
    • Uses stock AR-pattern trigger and semi-automatic disconnector springs with proprietary trigger, hammer, and disconnector components
    • Proprietary toggle-over-center spring system allows for lighter trigger pull without compromising hammer strike force
    • Trigger pull weight easily adjusted by shooter between 2-4lbs with 15 distinct variations
    • Installs without removal of the safety selector or modification to lower receiver

    Hiperfire HIPERTOUCH 24Competition

    The HIPERTOUCH® 24C is Hiperfire's competition version of fire-control drop-ins for installation in AR-15® and AR-10® type rifles.

    • Short travel and reset facilitate high speed shooting without sacrificing accuracy
    • Flat bow trigger compatible with included HIPERSHOE™ adjustable finger pad allows for fast and repeatable finger location
    • Uses stock AR-pattern trigger and semi-automatic disconnector springs with proprietary trigger, hammer, and disconnector components
    • Proprietary toggle-over-center spring system allows for lighter trigger pull without compromising hammer strike force
    • Trigger pull weight easily adjusted by shooter between 2-4lbs with 15 distinct variations
    • Installs without removal of the safety selector or modification to lower receiver
  • Hiperfire HIPERTOUCH 24Elite

    Price: $204.25

    The HIPERTOUCH® 24E is Hiperfire's elite version of fire-control drop-ins for installation in AR-15 and AR-10 type rifles.

    • Improved weight and pull geometry ideal for marksmen and hunters
    • Uses stock AR-pattern trigger and semi-automatic disconnector springs with proprietary trigger, hammer, and disconnector components
    • Proprietary toggle-over-center spring system allows for lighter and smoother trigger pull without compromising hammer strike force
    • Curved trigger bow replicates traditional AR trigger feel
    • Trigger pull weight easily adjusted by shooter between 2-4 lbs
    • Installs without removal of the safety selector or modification to lower receiver

    Hiperfire HIPERTOUCH 24Elite

    The HIPERTOUCH® 24E is Hiperfire's elite version of fire-control drop-ins for installation in AR-15 and AR-10 type rifles.

    • Improved weight and pull geometry ideal for marksmen and hunters
    • Uses stock AR-pattern trigger and semi-automatic disconnector springs with proprietary trigger, hammer, and disconnector components
    • Proprietary toggle-over-center spring system allows for lighter and smoother trigger pull without compromising hammer strike force
    • Curved trigger bow replicates traditional AR trigger feel
    • Trigger pull weight easily adjusted by shooter between 2-4 lbs
    • Installs without removal of the safety selector or modification to lower receiver
  • JP Adjustable/Reversible Selector, Ambidexterous

    Price: $66.45

    JP adjustable safety, reversible including extra low profile ambi lever for M-15 receiver can be used to eliminate the safety fitting process for the JPFC and FCP kits and provide perfect safety fit for any other aftermarket trigger system.

    JP Adjustable/Reversible Selector, Ambidexterous

    JP adjustable safety, reversible including extra low profile ambi lever for M-15 receiver can be used to eliminate the safety fitting process for the JPFC and FCP kits and provide perfect safety fit for any other aftermarket trigger system.

  • JP EZ Drop-In Fire Control Kit, AR-15/AR10, .154 Pin

    Price: $246.95

    JP EZ Drop-in .154" Small pin AR fire control kit including speed hammer, oversize anti-walk pins and adjustable/reversible selector.

    The standard spring sets included in all JP Fire Control kits include the yellow hammer and trigger springs, which may be used for competition and recreational applications with hand loads or domestic made non-military ammunition. The yellow/yellow combination results in a release weight in the 3.0-3.5 lb range on most receivers. Also included Is the red hammer spring for use with military (5.56 NATO) or foreign manufactured ammo with low sensitivity primers. The red hammer spring MUST be used on any tactical duty (LE) installations and any AR-10 type installation for 100% ignition reliability. The yellow/red combination results in a release weight of 3.5-4.0 lbs on most receivers.

    JP EZ Drop-In Fire Control Kit, AR-15/AR10, .154 Pin

    JP EZ Drop-in .154" Small pin AR fire control kit including speed hammer, oversize anti-walk pins and adjustable/reversible selector.

    The standard spring sets included in all JP Fire Control kits include the yellow hammer and trigger springs, which may be used for competition and recreational applications with hand loads or domestic made non-military ammunition. The yellow/yellow combination results in a release weight in the 3.0-3.5 lb range on most receivers. Also included Is the red hammer spring for use with military (5.56 NATO) or foreign manufactured ammo with low sensitivity primers. The red hammer spring MUST be used on any tactical duty (LE) installations and any AR-10 type installation for 100% ignition reliability. The yellow/red combination results in a release weight of 3.5-4.0 lbs on most receivers.

See more

Rifle - AR-15 Components

  • .300 Blackout Barrel Package

    Price: $269.00$344.00

    Choose between either of our .300 Blackout barrels and get your choice of either a matched bolt or an upper/handguard package.

    Bolt package includes barrel and a C158 manganese phosphate bolt.

    Upper/handguard package includes barrel, NC15 extruded upper receiver, and an NC-1 midlength handguard (10.5" barrel) or NC-2 XL handguard (16" barrel).

    Barrel information:

    • 1-8″ twist rate
    • Machined from 416 stainless match-grade blank
    • M4 feed ramps
    • Pistol-length (10.5″) or carbine-length (16″) gas port
    • Cryogenically treated
    • Black Teflon finish
    • 5/8x24" threaded muzzle

    .300 Blackout Barrel Package

    Choose between either of our .300 Blackout barrels and get your choice of either a matched bolt or an upper/handguard package.

    Bolt package includes barrel and a C158 manganese phosphate bolt.

    Upper/handguard package includes barrel, NC15 extruded upper receiver, and an NC-1 midlength handguard (10.5" barrel) or NC-2 XL handguard (16" barrel).

    Barrel information:

    • 1-8″ twist rate
    • Machined from 416 stainless match-grade blank
    • M4 feed ramps
    • Pistol-length (10.5″) or carbine-length (16″) gas port
    • Cryogenically treated
    • Black Teflon finish
    • 5/8x24" threaded muzzle
  • Sale!

    .300 Blackout Barrels

    Price: $112.50$134.50
    • 1-8″ twist rate
    • Machined from 416 stainless match-grade blank
    • M4 feed ramps
    • Pistol-length (10.5″) or carbine-length (16″) gas port
    • Cryogenically treated
    • Black Teflon finish
    • 5/8x24" threaded muzzle

    .300 Blackout Barrels

    • 1-8″ twist rate
    • Machined from 416 stainless match-grade blank
    • M4 feed ramps
    • Pistol-length (10.5″) or carbine-length (16″) gas port
    • Cryogenically treated
    • Black Teflon finish
    • 5/8x24" threaded muzzle
  • 5.56 NATO/.223 Wylde Barrels Package

    Price: $225.00$344.00

    Choose between either our 16" .223 Wylde or 11.5" 5.56 barrels and get your choice of either a matched bolt or an upper/handguard package.

    Bolt package includes barrel and a C158 manganese phosphate bolt.

    Upper/handguard package includes barrel, NC15 extruded upper receiver, and an NC-1 midlength handguard (11.5" barrel) or NC-2 XL handguard (16" barrel).

    16" .223 Wylde Barrel:

    • 1-8" twist rate
    • Machined from 416 stainless match-grade blank
    • M4 feed ramps
    • Mid-length (16") gas port
    • Cryogenically treated
    • Black Teflon finish
    • 1/2"x28 barrel threads

    11.5" 5.56 NATO Barrel:

    • 1-7" twist rate
    • Machined from 4150 Mil-B-11595E steel blank
    • M4 feed ramps
    • Carbine-length gas port
    • Cryogenically treated
    • QPQ finish
    • 1/2"-28 barrel threads

    16" .223 Wylde barrel pictured

    5.56 NATO/.223 Wylde Barrels Package

    Choose between either our 16" .223 Wylde or 11.5" 5.56 barrels and get your choice of either a matched bolt or an upper/handguard package.

    Bolt package includes barrel and a C158 manganese phosphate bolt.

    Upper/handguard package includes barrel, NC15 extruded upper receiver, and an NC-1 midlength handguard (11.5" barrel) or NC-2 XL handguard (16" barrel).

    16" .223 Wylde Barrel:

    • 1-8" twist rate
    • Machined from 416 stainless match-grade blank
    • M4 feed ramps
    • Mid-length (16") gas port
    • Cryogenically treated
    • Black Teflon finish
    • 1/2"x28 barrel threads

    11.5" 5.56 NATO Barrel:

    • 1-7" twist rate
    • Machined from 4150 Mil-B-11595E steel blank
    • M4 feed ramps
    • Carbine-length gas port
    • Cryogenically treated
    • QPQ finish
    • 1/2"-28 barrel threads

    16" .223 Wylde barrel pictured

  • Bolt Carrier Groups

    Price: $125.00$199.00

    Nordic bolt carrier groups for NC-10 (AR-10 platform) and NC-15 (AR-15 platform) uppers and rifles.

    • Slabside full-mass carriers machined from 8620 steel
    • Carriers and bolts black nitride finished for increased wear-resistance and durability
    • Bolts machined from 9310 steel, shot peened, and magnetic particle inspected
    • Properly torqued/staked gas key fasteners

    Bolt Carrier Groups

    Nordic bolt carrier groups for NC-10 (AR-10 platform) and NC-15 (AR-15 platform) uppers and rifles.

    • Slabside full-mass carriers machined from 8620 steel
    • Carriers and bolts black nitride finished for increased wear-resistance and durability
    • Bolts machined from 9310 steel, shot peened, and magnetic particle inspected
    • Properly torqued/staked gas key fasteners
  • Bolt Saver

    Price: $3.45

    Bolt Saver for AR15/M16 upper receiver.

    • Molded polymer cover to protect and retain bolt carrier group
    • Keeps dirt and debris out of upper internals
    • Compatible with any standard AR15-pattern upper, including Nordic Components 22RB Dedicated Upper
    • Installs with cotter-style pins through front and rear pin lugs (must be removed before installing on lower receiver)

    Bolt Saver

    Bolt Saver for AR15/M16 upper receiver.

    • Molded polymer cover to protect and retain bolt carrier group
    • Keeps dirt and debris out of upper internals
    • Compatible with any standard AR15-pattern upper, including Nordic Components 22RB Dedicated Upper
    • Installs with cotter-style pins through front and rear pin lugs (must be removed before installing on lower receiver)
  • CMC 3.5 LB. Drop-In Trigger – Curved – For Small Pin .154″ Diameter Only.

    Price: $167.99

    CMC curved-bow drop-in fire control group for AR15-pattern rifles.

    • Self-contained drop-in assembly for easy installation
    • High-quality match grade trigger with 3.5lb pull weight
    • Contained in 410 stainless steel house
    • Includes oversized hammer and trigger pins and clip retainers
    • For small-pin (.154") lowers only
    • Not recommended for use with 5.45x39 rifles
    • Also available with straight trigger bow.

    CMC 3.5 LB. Drop-In Trigger – Curved – For Small Pin .154″ Diameter Only.

    CMC curved-bow drop-in fire control group for AR15-pattern rifles.

    • Self-contained drop-in assembly for easy installation
    • High-quality match grade trigger with 3.5lb pull weight
    • Contained in 410 stainless steel house
    • Includes oversized hammer and trigger pins and clip retainers
    • For small-pin (.154") lowers only
    • Not recommended for use with 5.45x39 rifles
    • Also available with straight trigger bow.
  • CMC 3.5 LB. Drop-In Trigger – Straight – For Small Pin .154″ Diameter Only.

    Price: $167.99
    CMC straight-bow drop-in fire control group for AR15-pattern rifles.
    • Self-contained drop-in assembly for easy installation
    • High-quality match grade trigger with 3.5lb pull weight
    • Contained in 410 stainless steel house
    • Includes oversized hammer and trigger pins and clip retainers
    • For small-pin (.154") lowers only
    • Not recommended for use with 5.45x39 rifles
    • Also available with curved trigger bow.

    CMC 3.5 LB. Drop-In Trigger – Straight – For Small Pin .154″ Diameter Only.

    CMC straight-bow drop-in fire control group for AR15-pattern rifles.
    • Self-contained drop-in assembly for easy installation
    • High-quality match grade trigger with 3.5lb pull weight
    • Contained in 410 stainless steel house
    • Includes oversized hammer and trigger pins and clip retainers
    • For small-pin (.154") lowers only
    • Not recommended for use with 5.45x39 rifles
    • Also available with curved trigger bow.
  • Gas Tube for AR10/AR15, Carbine-length

    Price: $13.95

    Gas tube for AR10/AR15, Carbine-length.

    Gas Tube for AR10/AR15, Carbine-length

    Gas tube for AR10/AR15, Carbine-length.

  • Gas Tube for AR10/AR15, Mid-length

    Price: $13.95

    For use with our Lilja and Wilson mid-length gas system barrels

    Gas Tube for AR10/AR15, Mid-length

    For use with our Lilja and Wilson mid-length gas system barrels

  • Gas Tube for AR10/AR15, Rifle-length

    Price: $13.95

    For use with any Rifle-length gas system barrels.

    Gas Tube for AR10/AR15, Rifle-length

    For use with any Rifle-length gas system barrels.

  • Heavy-Duty Charge Handle

    Price: $33.73$45.95

    Nordic Components heavy-duty charging handle.

    • Anodized 7075 aluminum
    • Designed to minimize rotation and canting during charging
    • Available with standard charging handle latch or Badger Ordnance Tactical Latch.

    Heavy-Duty Charge Handle

    Nordic Components heavy-duty charging handle.

    • Anodized 7075 aluminum
    • Designed to minimize rotation and canting during charging
    • Available with standard charging handle latch or Badger Ordnance Tactical Latch.
See more

Complete Firearms - 9MM

9MM

  • 16″ NCPCC

    Rated 5.00 out of 5

    A COPY OF THE RECEIVING FFL MUST BE SENT TO FFL@NORDICCOMP.COM UPON ORDER PLACEMENT.

    FFL information must include order number and customer name. Orders will be held until receipt of a valid FFL.

    16″ NCPCC

    A COPY OF THE RECEIVING FFL MUST BE SENT TO FFL@NORDICCOMP.COM UPON ORDER PLACEMENT.

    FFL information must include order number and customer name. Orders will be held until receipt of a valid FFL.

  • 8.5″ NCPCC Pistol

    Rated 5.00 out of 5

    A COPY OF THE RECEIVING FFL MUST BE SENT TO FFL@NORDICCOMP.COM UPON ORDER PLACEMENT.

    FFL information must include order number and customer name. Orders will be held until receipt of a valid FFL.

    8.5″ NCPCC Pistol

    A COPY OF THE RECEIVING FFL MUST BE SENT TO FFL@NORDICCOMP.COM UPON ORDER PLACEMENT.

    FFL information must include order number and customer name. Orders will be held until receipt of a valid FFL.

Complete Firearms - .22LR

  • 16″ NC-22LR

    Price: $775.00

    The grown-up, complete rifle version of our popular 22RB dedicated upper -- because everyone knows that the only thing better than a dedicated .22LR upper is a dedicated .22LR upper that comes with its own fully-equipped lower receiver.

    ***CALIFORNIA COMPLIANT***

    SUPPRESSOR READY!

    The 22RB's match-grade barrel comes prepared to accept a suppressor - the barrel threads are cut to the proper spec for most popular .22 suppressors, and has a machined tenon to accommodate the O-rings found on certain suppressor models.

    Features:

    Upper:

    • 1-16 twist match barrel
    • A2 flash suppressor
    • Aluminum slim diameter hand guard
    • Aluminum upper
    • Stainless steel bolt

    Lower:

    • NC15 forged lower receiver
    • Mil-spec fire control group, mag catch, and bolt release
    • Magpul MOE polymer trigger guard
    • A2 pistol grip and 6-position mil-spec collapsible stock
    • Standard carbine buffer and spring

    *Will accept all Black Dog AR-15 .22 magazines

     

    16″ NC-22LR

    The grown-up, complete rifle version of our popular 22RB dedicated upper -- because everyone knows that the only thing better than a dedicated .22LR upper is a dedicated .22LR upper that comes with its own fully-equipped lower receiver.

    ***CALIFORNIA COMPLIANT***

    SUPPRESSOR READY!

    The 22RB's match-grade barrel comes prepared to accept a suppressor - the barrel threads are cut to the proper spec for most popular .22 suppressors, and has a machined tenon to accommodate the O-rings found on certain suppressor models.

    Features:

    Upper:

    • 1-16 twist match barrel
    • A2 flash suppressor
    • Aluminum slim diameter hand guard
    • Aluminum upper
    • Stainless steel bolt

    Lower:

    • NC15 forged lower receiver
    • Mil-spec fire control group, mag catch, and bolt release
    • Magpul MOE polymer trigger guard
    • A2 pistol grip and 6-position mil-spec collapsible stock
    • Standard carbine buffer and spring

    *Will accept all Black Dog AR-15 .22 magazines

     

  • 9.25″ NC-22LR Pistol

    Price: $699.00

    The grown-up, complete pistol version of our popular 22RB dedicated upper -- because everyone knows that the only thing better than a dedicated .22LR upper is a dedicated .22LR upper that comes with its own fully-equipped lower receiver.

    SUPPRESSOR READY!

    The 22RB's match-grade barrel comes prepared to accept a suppressor - the barrel threads are cut to the proper spec for most popular .22 suppressors, and has a machined tenon to accommodate the O-rings found on certain suppressor models.

    Features:

    Upper:

    • 1-16 twist match barrel
    • A2 flash suppressor
    • Aluminum slim diameter hand guard
    • Aluminum upper
    • Stainless steel bolt

    Lower:

    • NC15 forged lower receiver
    • Mil-spec fire control group, mag catch, and bolt release
    • Magpul MOE polymer trigger guard
    • KAK Pistol Brace and buffer tube
    • Standard carbine buffer and spring

    *Will accept all Black Dog AR-15 .22 magazines

     

     

    9.25″ NC-22LR Pistol

    The grown-up, complete pistol version of our popular 22RB dedicated upper -- because everyone knows that the only thing better than a dedicated .22LR upper is a dedicated .22LR upper that comes with its own fully-equipped lower receiver.

    SUPPRESSOR READY!

    The 22RB's match-grade barrel comes prepared to accept a suppressor - the barrel threads are cut to the proper spec for most popular .22 suppressors, and has a machined tenon to accommodate the O-rings found on certain suppressor models.

    Features:

    Upper:

    • 1-16 twist match barrel
    • A2 flash suppressor
    • Aluminum slim diameter hand guard
    • Aluminum upper
    • Stainless steel bolt

    Lower:

    • NC15 forged lower receiver
    • Mil-spec fire control group, mag catch, and bolt release
    • Magpul MOE polymer trigger guard
    • KAK Pistol Brace and buffer tube
    • Standard carbine buffer and spring

    *Will accept all Black Dog AR-15 .22 magazines

     

     

Complete Firearms - .223/5.56mm NATO

  • 11.5″ NC-15 5.56mm NATO

    A rifle designed for and used by professionals, at a price within reach of anyone.  The NC15 features high quality components, including a tack-driving stainless steel barrel, Black nitride-finished bolt carrier group, and Magpul furniture, as well as optional barrel finishes and handguard lengths, and a lower receiver that is machined to stand out from the rest of its forged counterparts.  For one rifle that is at home anywhere, from the match cart to the patrol car, nothing fits the bill quite like the NC15.

    UPPER:

    • Caliber: 5.56mm NATO
    • Barrel: 1-7 11.5" 4150 Mil-B-11595E steel w/ M4 feed ramps and carbine length gas port - bead-blasted, QPQ finish and cryo-treated
    • Muzzle Device: NC flash hider, black finish
    • Gas Block: NC non-adjustable low-profile .750 dia.
    • Handguard: NC-3 freefloat M-LOK compatible handguard
    • Upper Receiver: NC15 billet
    • Bolt Carrier: 8620 Black nitride slabside M16 carrier with properly staked gas key
    • Bolt:  9310 MPI

    LOWER:

    • Lower Receiver: NC15 forged lower receiver
    • Bolt Catch: Mil-Spec
    • Magazine Release: Mil-Spec
    • Fire Control Group: Mil-Spec
    • Trigger Guard: Magpul MOE Polymer
    • Grip: Magpul MOE
    • Buffer: Standard carbine
    • Buffer Tube: Mil-Spec 6-position
    • Stock: Magpul CTR Mil-Spec

    *ALL NFA RULES APPLY

     

    11.5″ NC-15 5.56mm NATO

    A rifle designed for and used by professionals, at a price within reach of anyone.  The NC15 features high quality components, including a tack-driving stainless steel barrel, Black nitride-finished bolt carrier group, and Magpul furniture, as well as optional barrel finishes and handguard lengths, and a lower receiver that is machined to stand out from the rest of its forged counterparts.  For one rifle that is at home anywhere, from the match cart to the patrol car, nothing fits the bill quite like the NC15.

    UPPER:

    • Caliber: 5.56mm NATO
    • Barrel: 1-7 11.5" 4150 Mil-B-11595E steel w/ M4 feed ramps and carbine length gas port - bead-blasted, QPQ finish and cryo-treated
    • Muzzle Device: NC flash hider, black finish
    • Gas Block: NC non-adjustable low-profile .750 dia.
    • Handguard: NC-3 freefloat M-LOK compatible handguard
    • Upper Receiver: NC15 billet
    • Bolt Carrier: 8620 Black nitride slabside M16 carrier with properly staked gas key
    • Bolt:  9310 MPI

    LOWER:

    • Lower Receiver: NC15 forged lower receiver
    • Bolt Catch: Mil-Spec
    • Magazine Release: Mil-Spec
    • Fire Control Group: Mil-Spec
    • Trigger Guard: Magpul MOE Polymer
    • Grip: Magpul MOE
    • Buffer: Standard carbine
    • Buffer Tube: Mil-Spec 6-position
    • Stock: Magpul CTR Mil-Spec

    *ALL NFA RULES APPLY

     

  • 16″ NC-15 .223

    Rated 5.00 out of 5

    A COPY OF THE RECEIVING FFL MUST BE SENT TO FFL@NORDICCOMP.COM UPON ORDER PLACEMENT.

    FFL information must include order number and customer name. Orders will be held until receipt of a valid FFL.

    16″ NC-15 .223

    A COPY OF THE RECEIVING FFL MUST BE SENT TO FFL@NORDICCOMP.COM UPON ORDER PLACEMENT.

    FFL information must include order number and customer name. Orders will be held until receipt of a valid FFL.

  • 18″ NC-15 .223

    Rated 5.00 out of 5

    A COPY OF THE RECEIVING FFL MUST BE SENT TO FFL@NORDICCOMP.COM UPON ORDER PLACEMENT.

    FFL information must include order number and customer name. Orders will be held until receipt of a valid FFL.

    18″ NC-15 .223

    A COPY OF THE RECEIVING FFL MUST BE SENT TO FFL@NORDICCOMP.COM UPON ORDER PLACEMENT.

    FFL information must include order number and customer name. Orders will be held until receipt of a valid FFL.

Complete Firearms - .300BLK

  • 10.5″ NC-15 .300BLK

    Price: $1,549.00

    A COPY OF THE RECEIVING FFL MUST BE SENT TO FFL@NORDICCOMP.COM UPON ORDER PLACEMENT.

    FFL information must include order number and customer name. Orders will be held until receipt of a valid FFL.

    10.5″ NC-15 .300BLK

    A COPY OF THE RECEIVING FFL MUST BE SENT TO FFL@NORDICCOMP.COM UPON ORDER PLACEMENT.

    FFL information must include order number and customer name. Orders will be held until receipt of a valid FFL.

  • 16″ NC-15 .300BLK

    Rated 5.00 out of 5

    A COPY OF THE RECEIVING FFL MUST BE SENT TO FFL@NORDICCOMP.COM UPON ORDER PLACEMENT.

    FFL information must include order number and customer name. Orders will be held until receipt of a valid FFL.

    16″ NC-15 .300BLK

    A COPY OF THE RECEIVING FFL MUST BE SENT TO FFL@NORDICCOMP.COM UPON ORDER PLACEMENT.

    FFL information must include order number and customer name. Orders will be held until receipt of a valid FFL.

Complete Firearms - .308

  • NC10 Complete Rifle – 16″ .308 Heavy Barrel

    A rifle designed for and used by professionals, at a price within reach of anyone. The NC10 features high quality components, including a tack-driving cryogenically treated stainless steel barrel, black nitride-finished bolt carrier group, Magpul furniture, and a lower receiver that is machined to stand out from the rest of its forged counterparts. Designed for both speed and precision, the NC10 comes with a HIPERFIRE 24 3G fire control group as standard equipment. For one rifle that is at home anywhere, from the match cart to the patrol car, nothing fits the bill quite like the NC10.

    Complete Rifle weights
    16” H       8.790 lbs
    16” LW    7.870 lbs
    18” LW    8.300 lbs
    20” H      10.610 lbs

    UPPER:

    Caliber: .308 Winchester
    Barrel: 1-10 16″ heavy-profile match grade stainless steel with rifle-length gas port – cryogenically-treated with Black Teflon finish
    Muzzle Device: NC flash hider, black finish
    Gas Block: NC adjustable low-profile .750 dia.
    Handguard: NC-308 freefloat M-LOK compatible 15" handguard
    Upper Receiver: NC10 billet
    Bolt Carrier: Black nitride 8620 slabside NC10 carrier with properly staked gas key
    Bolt: 9310 MPI

    LOWER:

    Lower Receiver: NC10 forged lower receiver
    Bolt Catch: Mil-Spec
    Magazine Release: Mil-Spec
    Fire Control Group: HIPERFIRE 24 3G
    Grip: Magpul MOE
    Buffer: Standard .308 carbine
    Buffer Tube: Mil-spec 6-position
    Stock: Magpul ACS mil-spec

     

    NC10 Complete Rifle – 16″ .308 Heavy Barrel

    A rifle designed for and used by professionals, at a price within reach of anyone. The NC10 features high quality components, including a tack-driving cryogenically treated stainless steel barrel, black nitride-finished bolt carrier group, Magpul furniture, and a lower receiver that is machined to stand out from the rest of its forged counterparts. Designed for both speed and precision, the NC10 comes with a HIPERFIRE 24 3G fire control group as standard equipment. For one rifle that is at home anywhere, from the match cart to the patrol car, nothing fits the bill quite like the NC10.

    Complete Rifle weights
    16” H       8.790 lbs
    16” LW    7.870 lbs
    18” LW    8.300 lbs
    20” H      10.610 lbs

    UPPER:

    Caliber: .308 Winchester
    Barrel: 1-10 16″ heavy-profile match grade stainless steel with rifle-length gas port – cryogenically-treated with Black Teflon finish
    Muzzle Device: NC flash hider, black finish
    Gas Block: NC adjustable low-profile .750 dia.
    Handguard: NC-308 freefloat M-LOK compatible 15" handguard
    Upper Receiver: NC10 billet
    Bolt Carrier: Black nitride 8620 slabside NC10 carrier with properly staked gas key
    Bolt: 9310 MPI

    LOWER:

    Lower Receiver: NC10 forged lower receiver
    Bolt Catch: Mil-Spec
    Magazine Release: Mil-Spec
    Fire Control Group: HIPERFIRE 24 3G
    Grip: Magpul MOE
    Buffer: Standard .308 carbine
    Buffer Tube: Mil-spec 6-position
    Stock: Magpul ACS mil-spec

     

  • NC10 Complete Rifle – 16″ .308 Lightweight

    A rifle designed for and used by professionals, at a price within reach of anyone. The NC10 features high quality components, including a tack-driving cryogenically treated stainless steel barrel, black nitride-finished bolt carrier group, and a lower receiver that is machined to stand out from the rest of its forged counterparts. Designed with both accuracy and portability in mind, the lightweight 16" NC10 comes with a HIPERFIRE 24 3G fire control group as standard equipment, along with a minimalist Mission First Tactical stock and a light-profile barrel. For a lightweight rifle that doesn't sacrifice power to cut weight, nothing fits the bill quite like the NC10.

    Complete Rifle weights
    16” H       8.790 lbs
    16” LW    7.870 lbs
    18” LW    8.300 lbs
    20” H      10.610 lbs

    UPPER:

    Caliber: .308 Winchester
    Barrel: 1-10 16″ lightweight match grade stainless steel with midlength gas port – cryogenically-treated with Black Teflon finish
    Muzzle Device: NC flash hider, black finish
    Gas Block: NC adjustable low-profile .750 dia.
    Handguard: NC-308 freefloat M-LOK compatible 15" handguard
    Upper Receiver: NC10 billet
    Bolt Carrier: Black nitride 8620 slabside NC10 carrier with properly staked gas key
    Bolt: 9310 MPI

    LOWER:

    Lower Receiver: NC10 forged lower receiver
    Bolt Catch: Mil-Spec
    Magazine Release: Mil-Spec
    Fire Control Group: HIPERFIRE 24 3G
    Grip: Magpul MOE
    Buffer: Standard .308 carbine
    Buffer Tube: Mil-spec 6-position
    Stock: Mission First Tactical BMS collapsible

    *All serialized items must be sent to an FFL dealer

    NC10 Complete Rifle – 16″ .308 Lightweight

    A rifle designed for and used by professionals, at a price within reach of anyone. The NC10 features high quality components, including a tack-driving cryogenically treated stainless steel barrel, black nitride-finished bolt carrier group, and a lower receiver that is machined to stand out from the rest of its forged counterparts. Designed with both accuracy and portability in mind, the lightweight 16" NC10 comes with a HIPERFIRE 24 3G fire control group as standard equipment, along with a minimalist Mission First Tactical stock and a light-profile barrel. For a lightweight rifle that doesn't sacrifice power to cut weight, nothing fits the bill quite like the NC10.

    Complete Rifle weights
    16” H       8.790 lbs
    16” LW    7.870 lbs
    18” LW    8.300 lbs
    20” H      10.610 lbs

    UPPER:

    Caliber: .308 Winchester
    Barrel: 1-10 16″ lightweight match grade stainless steel with midlength gas port – cryogenically-treated with Black Teflon finish
    Muzzle Device: NC flash hider, black finish
    Gas Block: NC adjustable low-profile .750 dia.
    Handguard: NC-308 freefloat M-LOK compatible 15" handguard
    Upper Receiver: NC10 billet
    Bolt Carrier: Black nitride 8620 slabside NC10 carrier with properly staked gas key
    Bolt: 9310 MPI

    LOWER:

    Lower Receiver: NC10 forged lower receiver
    Bolt Catch: Mil-Spec
    Magazine Release: Mil-Spec
    Fire Control Group: HIPERFIRE 24 3G
    Grip: Magpul MOE
    Buffer: Standard .308 carbine
    Buffer Tube: Mil-spec 6-position
    Stock: Mission First Tactical BMS collapsible

    *All serialized items must be sent to an FFL dealer

  • NC10 Complete Rifle – 18″ .308

    A rifle designed for and used by professionals, at a price within reach of anyone. The NC10 features high quality components, including a tack-driving cryogenically treated stainless steel barrel, black nitride-finished bolt carrier group, Magpul furniture, and a lower receiver that is machined to stand out from the rest of its forged counterparts. Designed for both speed and precision, the NC10 comes with a HIPERFIRE 24 3G fire control group as standard equipment. For one rifle that is at home anywhere, from the match cart to the patrol car, nothing fits the bill quite like the NC10.

    Complete Rifle weights
    16” H       8.790 lbs
    16” LW    7.870 lbs
    18” LW    8.300 lbs
    20” H      10.610 lbs

    UPPER:

    Caliber: .308 Winchester
    Barrel: 1-10 18″ light weight match grade stainless steel with rifle-length gas port – cryogenically-treated with Black Teflon finish
    Muzzle Device: NC flash hider, black finish
    Gas Block: NC adjustable low-profile .750 dia.
    Handguard: NC-308 freefloat M-LOK compatible 15" handguard
    Upper Receiver: NC10 billet
    Bolt Carrier: Black nitride 8620 slabside NC10 carrier with properly staked gas key
    Bolt: 9310 MPI

    LOWER:

    Lower Receiver: NC10 forged lower receiver
    Bolt Catch: Mil-Spec
    Magazine Release: Mil-Spec
    Fire Control Group: HIPERFIRE 24 3G
    Grip: Magpul MOE
    Buffer: Standard .308 carbine
    Buffer Tube: Mil-spec 6-position
    Stock: Magpul CTR mil-spec

    *All serialized items must be sent to an FFL dealer

    NC10 Complete Rifle – 18″ .308

    A rifle designed for and used by professionals, at a price within reach of anyone. The NC10 features high quality components, including a tack-driving cryogenically treated stainless steel barrel, black nitride-finished bolt carrier group, Magpul furniture, and a lower receiver that is machined to stand out from the rest of its forged counterparts. Designed for both speed and precision, the NC10 comes with a HIPERFIRE 24 3G fire control group as standard equipment. For one rifle that is at home anywhere, from the match cart to the patrol car, nothing fits the bill quite like the NC10.

    Complete Rifle weights
    16” H       8.790 lbs
    16” LW    7.870 lbs
    18” LW    8.300 lbs
    20” H      10.610 lbs

    UPPER:

    Caliber: .308 Winchester
    Barrel: 1-10 18″ light weight match grade stainless steel with rifle-length gas port – cryogenically-treated with Black Teflon finish
    Muzzle Device: NC flash hider, black finish
    Gas Block: NC adjustable low-profile .750 dia.
    Handguard: NC-308 freefloat M-LOK compatible 15" handguard
    Upper Receiver: NC10 billet
    Bolt Carrier: Black nitride 8620 slabside NC10 carrier with properly staked gas key
    Bolt: 9310 MPI

    LOWER:

    Lower Receiver: NC10 forged lower receiver
    Bolt Catch: Mil-Spec
    Magazine Release: Mil-Spec
    Fire Control Group: HIPERFIRE 24 3G
    Grip: Magpul MOE
    Buffer: Standard .308 carbine
    Buffer Tube: Mil-spec 6-position
    Stock: Magpul CTR mil-spec

    *All serialized items must be sent to an FFL dealer

  • NC10 Complete Rifle – 20″ .308

    A rifle designed for and used by professionals, at a price within reach of anyone. The NC10 features high quality components, including a tack-driving cryogenically treated stainless steel barrel, black nitride-finished bolt carrier group, Magpul furniture, and a lower receiver that is machined to stand out from the rest of its forged counterparts. Designed with accuracy in mind, the 20" NC10 comes with a HIPERFIRE 24 3G fire control group as standard equipment. For the ultimate in semi-automatic accuracy, nothing fits the bill quite like the NC10.

    Complete Rifle weights
    16” H       8.790 lbs
    16” LW    7.870 lbs
    18” LW    8.300 lbs
    20” H      10.610 lbs

    UPPER:

    Caliber: .308 Winchester
    Barrel: 1-10 20″ heavy-profile match grade stainless steel and rifle-length gas port – cryogenically-treated with Black Teflon finish
    Muzzle Device: NC flash hider, black finish
    Gas Block: NC adjustable low-profile .750 dia.
    Handguard: NC-308 freefloat M-LOK compatible 15" handguard
    Upper Receiver: NC10 billet
    Bolt Carrier: Black nitride 8620 slabside NC10 carrier with properly staked gas key
    Bolt: 9310 MPI

    LOWER:

    Lower Receiver: NC10 forged lower receiver
    Bolt Catch: Mil-Spec
    Magazine Release: Mil-Spec
    Fire Control Group: HIPERFIRE 24 3G
    Grip: Magpul MOE
    Buffer: Standard .308 rifle buffer
    Buffer Tube: Mil-spec rifle tube
    Stock: Magpul PRS

    *All serialized items must be sent to an FFL dealer

    NC10 Complete Rifle – 20″ .308

    A rifle designed for and used by professionals, at a price within reach of anyone. The NC10 features high quality components, including a tack-driving cryogenically treated stainless steel barrel, black nitride-finished bolt carrier group, Magpul furniture, and a lower receiver that is machined to stand out from the rest of its forged counterparts. Designed with accuracy in mind, the 20" NC10 comes with a HIPERFIRE 24 3G fire control group as standard equipment. For the ultimate in semi-automatic accuracy, nothing fits the bill quite like the NC10.

    Complete Rifle weights
    16” H       8.790 lbs
    16” LW    7.870 lbs
    18” LW    8.300 lbs
    20” H      10.610 lbs

    UPPER:

    Caliber: .308 Winchester
    Barrel: 1-10 20″ heavy-profile match grade stainless steel and rifle-length gas port – cryogenically-treated with Black Teflon finish
    Muzzle Device: NC flash hider, black finish
    Gas Block: NC adjustable low-profile .750 dia.
    Handguard: NC-308 freefloat M-LOK compatible 15" handguard
    Upper Receiver: NC10 billet
    Bolt Carrier: Black nitride 8620 slabside NC10 carrier with properly staked gas key
    Bolt: 9310 MPI

    LOWER:

    Lower Receiver: NC10 forged lower receiver
    Bolt Catch: Mil-Spec
    Magazine Release: Mil-Spec
    Fire Control Group: HIPERFIRE 24 3G
    Grip: Magpul MOE
    Buffer: Standard .308 rifle buffer
    Buffer Tube: Mil-spec rifle tube
    Stock: Magpul PRS

    *All serialized items must be sent to an FFL dealer

Gear - Patches

Gear - Shirts

  • Black Logo T-Shirt

    Price: $20.00

    Description:  Call back to a classic style with this super-soft blended CVC crew shirt.

    Sizes:  S-3XL

    Key Features:

    60% combed ring-spun cotton/40% polyester jersey

    Fabric laundered for reduced shrinkage

    Tear-away label

    Screen Printed

    Black Logo T-Shirt

    Description:  Call back to a classic style with this super-soft blended CVC crew shirt.

    Sizes:  S-3XL

    Key Features:

    60% combed ring-spun cotton/40% polyester jersey

    Fabric laundered for reduced shrinkage

    Tear-away label

    Screen Printed

  • Black Nordic Viking T-Shirt

    Price: $20.00

    Ever wake up in the morning, look in the closet, and bemoan the fact that horned helmets have been out of style for centuries?  Feel like there's just no good way to simultaneously vibe "fashionable 21st-century individual" and "might go ransack that village for funzies"?  Problem solved.  Slip on this Nordic t-shirt, and you'll be heading down to the courthouse to change your last name to Bloodaxe or Forkbeard in no time.


    Sizes: S-3XL

    60% combed ring-spun cotton/40% polyester jersey

    Fabric laundered for reduced shrinkage

    Tear-away label

     

    Black Nordic Viking T-Shirt

    Ever wake up in the morning, look in the closet, and bemoan the fact that horned helmets have been out of style for centuries?  Feel like there's just no good way to simultaneously vibe "fashionable 21st-century individual" and "might go ransack that village for funzies"?  Problem solved.  Slip on this Nordic t-shirt, and you'll be heading down to the courthouse to change your last name to Bloodaxe or Forkbeard in no time.


    Sizes: S-3XL

    60% combed ring-spun cotton/40% polyester jersey

    Fabric laundered for reduced shrinkage

    Tear-away label

     

  • Charcoal Nordic T-Shirt

    Price: $20.00

    Description:  Call back to a classic style with this super-soft blended CVC crew shirt.

    Sizes:  S-3XL

    Key Features:

    60% combed ring-spun cotton/40% polyester jersey

    Fabric laundered for reduced shrinkage

    Tear-away label

    Screen Printed

    Charcoal Nordic T-Shirt

    Description:  Call back to a classic style with this super-soft blended CVC crew shirt.

    Sizes:  S-3XL

    Key Features:

    60% combed ring-spun cotton/40% polyester jersey

    Fabric laundered for reduced shrinkage

    Tear-away label

    Screen Printed

  • Light Olive AR T-Shirt

    Price: $20.00

    Description: Call back to a classic style with this super-soft blended CVC crew shirt.

    Sizes: S-3XL

    Key Features:

    60% combed ring-spun cotton/40% polyester jersey

    Fabric laundered for reduced shrinkage

    Tear-away label

    Screen Printed

    Light Olive AR T-Shirt

    Description: Call back to a classic style with this super-soft blended CVC crew shirt.

    Sizes: S-3XL

    Key Features:

    60% combed ring-spun cotton/40% polyester jersey

    Fabric laundered for reduced shrinkage

    Tear-away label

    Screen Printed

  • Midnight Navy Nordic T-Shirt

    Price: $20.00

    Description:  Call back to a classic style with this super-soft blended CVC crew shirt.

    Sizes:  S-3XL

    Key Features:

    60% combed ring-spun cotton/40% polyester jersey

    Fabric laundered for reduced shrinkage

    Tear-away label

    Screen Printed

    Midnight Navy Nordic T-Shirt

    Description:  Call back to a classic style with this super-soft blended CVC crew shirt.

    Sizes:  S-3XL

    Key Features:

    60% combed ring-spun cotton/40% polyester jersey

    Fabric laundered for reduced shrinkage

    Tear-away label

    Screen Printed

  • Red Ammo T-Shirt

    Price: $20.00

    If you've ever found yourself without Internet access and wondering what calibers are available in Nordic's complete firearms, this is the shirt for you.  Featuring cartridge silhouettes of .22LR, 9x19, .223, .300 Blackout, and .308, it's got the whole lineup.  Not recommended for use as a cartridge gauge, chamber reference, or anything else ridiculously irresponsible.

    Sizes: S-3XL

    Key Features:

    60% combed ring-spun cotton/40% polyester jersey

    Fabric laundered for reduced shrinkage

    Tear-away label

     

    Red Ammo T-Shirt

    If you've ever found yourself without Internet access and wondering what calibers are available in Nordic's complete firearms, this is the shirt for you.  Featuring cartridge silhouettes of .22LR, 9x19, .223, .300 Blackout, and .308, it's got the whole lineup.  Not recommended for use as a cartridge gauge, chamber reference, or anything else ridiculously irresponsible.

    Sizes: S-3XL

    Key Features:

    60% combed ring-spun cotton/40% polyester jersey

    Fabric laundered for reduced shrinkage

    Tear-away label

     

  • Stone Gray Logo T-Shirt

    Rated 3.00 out of 5
    Price: $20.00

    Description:  Call back to a classic style with this super-soft blended CVC crew shirt.

    Sizes:  S-3XL

    Key Features:

    60% combed ring-spun cotton/40% polyester jersey

    Fabric laundered for reduced shrinkage

    Tear-away label

    Screen Printed

    Stone Gray Logo T-Shirt

    Description:  Call back to a classic style with this super-soft blended CVC crew shirt.

    Sizes:  S-3XL

    Key Features:

    60% combed ring-spun cotton/40% polyester jersey

    Fabric laundered for reduced shrinkage

    Tear-away label

    Screen Printed

  • Warm Gray Helmet T-Shirt

    Price: $20.00

    You can debate all you want about whether this is an Anglo-Saxon helmet or if it has more of a Norman or Frankish thing going on.  What isn't up for debate is the fact that, rather than pikes, spears, swords, and trebuchet-hurled dead livestock, all of those guys would've rather used a modern semi-automatic rifle -- and the smart ones would've chosen a Nordic rifle, just like you.


    Sizes: S-3XL

    Key Features:

    60% combed ring-spun cotton/40% polyester jersey

    Fabric laundered for reduced shrinkage

    Tear-away label

    Warm Gray Helmet T-Shirt

    You can debate all you want about whether this is an Anglo-Saxon helmet or if it has more of a Norman or Frankish thing going on.  What isn't up for debate is the fact that, rather than pikes, spears, swords, and trebuchet-hurled dead livestock, all of those guys would've rather used a modern semi-automatic rifle -- and the smart ones would've chosen a Nordic rifle, just like you.


    Sizes: S-3XL

    Key Features:

    60% combed ring-spun cotton/40% polyester jersey

    Fabric laundered for reduced shrinkage

    Tear-away label

  • White Flag T-Shirt

    Price: $20.00

    No one's going to be asking how you feel about AR rifles, domestic manufacturing, or America when they spot you wearing this shirt.  Wear your patriotism on your sleeve -- and on your chest and upper back.


    Sizes: S-3XL

    Key Features:

    60% combed ring-spun cotton/40% polyester jersey

    Fabric laundered for reduced shrinkage

    Tear-away label

    White Flag T-Shirt

    No one's going to be asking how you feel about AR rifles, domestic manufacturing, or America when they spot you wearing this shirt.  Wear your patriotism on your sleeve -- and on your chest and upper back.


    Sizes: S-3XL

    Key Features:

    60% combed ring-spun cotton/40% polyester jersey

    Fabric laundered for reduced shrinkage

    Tear-away label

Surefire Products

  • Minimus™ Variable-Output LED Headlamp – 100 Lumen

    Price: $159.00

    Minimus

    Variable-Output LED Headlamp

    Minimus™ Variable-Output LED Headlamp – 100 Lumen

    Minimus

    Variable-Output LED Headlamp

  • R1 Lawman™ Rechargeable Variable-Output LED-750 Lumen

    Price: $400.00

    R1 Lawman

    Rechargeable Variable-Output LED

    R1 Lawman™ Rechargeable Variable-Output LED-750 Lumen

    R1 Lawman

    Rechargeable Variable-Output LED

  • SUREFIRE – 7.62 mm (.308 Caliber) SOCOM Muzzle Brakes

    Price: $149.00

    SFMB-762-5/8-24

    Muzzle Brake / Suppressor Adapter

    SUREFIRE – 7.62 mm (.308 Caliber) SOCOM Muzzle Brakes

    SFMB-762-5/8-24

    Muzzle Brake / Suppressor Adapter

  • SUREFIRE – ProComp Series Muzzle Brakes – PROCOMP 762

    Price: $59.00

    SUREFIRE – ProComp Series Muzzle Brakes – PROCOMP 762

    SUREFIRE – ProComp Series Muzzle Brakes – PROCOMP 762

    SUREFIRE – ProComp Series Muzzle Brakes – PROCOMP 762

  • Surefire 3P Eliminator Flash Hider

    Price: $59.00

    The advanced SureFire SureFire 3P Eliminator 556 three-prong flash hider, which fits M4/M16 weapons and variants with 1/2x28 muzzle threads, features a patent-pending design that greatly reduces muzzle flash — typically greater than 99%—when compared with a plain muzzle. Boasting robust tines built to withstand the rigors of combat, the SureFire 3P Eliminator 556 duplicates the key functional design elements of the SureFire SF3P-556-1/2-28 flash hider, but unlike the latter it cannot be used to mount SureFire SOCOM suppressors.

    Precision machined from US mill-certified steel bar stock—including high-precision single-point cut threads for optimum thread interface—the SureFire 3P Eliminator 556 muzzle brake has a black Melonite finish that provides maximum protection under harsh environmental conditions and facilitates cleaning even after extreme use.

    Surefire 3P Eliminator Flash Hider

    The advanced SureFire SureFire 3P Eliminator 556 three-prong flash hider, which fits M4/M16 weapons and variants with 1/2x28 muzzle threads, features a patent-pending design that greatly reduces muzzle flash — typically greater than 99%—when compared with a plain muzzle. Boasting robust tines built to withstand the rigors of combat, the SureFire 3P Eliminator 556 duplicates the key functional design elements of the SureFire SF3P-556-1/2-28 flash hider, but unlike the latter it cannot be used to mount SureFire SOCOM suppressors.

    Precision machined from US mill-certified steel bar stock—including high-precision single-point cut threads for optimum thread interface—the SureFire 3P Eliminator 556 muzzle brake has a black Melonite finish that provides maximum protection under harsh environmental conditions and facilitates cleaning even after extreme use.

Complete Uppers

  • 10.5″ .300BLK Complete Upper

    Price: $1,150.00

    UPPER:

    • Caliber: .300BLK
    • Barrel: 1-8 10.5" stainless steel w/ M4 feed ramps and pistol length gas port - cryogenically-treated with Black Teflon finish
    • Muzzle Device: NC flash hider, black finish
    • Gas Block: NC non-adjustable low-profile .750 dia.
    • Handguard: NC-3 freefloat M-LOK compatible handguard - Midlength available
    • Upper Receiver: NC15 billet
    • Bolt Carrier: Black nitride slabside AR carrier with properly staked gas key
    • Bolt:  9310 MPI

    *ALL NFA RULES APPLY

    10.5″ .300BLK Complete Upper

    UPPER:

    • Caliber: .300BLK
    • Barrel: 1-8 10.5" stainless steel w/ M4 feed ramps and pistol length gas port - cryogenically-treated with Black Teflon finish
    • Muzzle Device: NC flash hider, black finish
    • Gas Block: NC non-adjustable low-profile .750 dia.
    • Handguard: NC-3 freefloat M-LOK compatible handguard - Midlength available
    • Upper Receiver: NC15 billet
    • Bolt Carrier: Black nitride slabside AR carrier with properly staked gas key
    • Bolt:  9310 MPI

    *ALL NFA RULES APPLY

  • 11.5″ 5.56 Complete Upper

    Price: $1,150.00

    UPPER:

    • Caliber: 5.56 NATO
    • Barrel: 1-7 11.5″ 4150 Mil-B-11595E steel w/ M4 feed ramps and carbine length gas port – bead-blasted, QPQ finish and cryo-treated
    • Muzzle Device: NC flash hider, black finish
    • Gas Block: NC non-adjustable low-profile .750 dia.
    • Handguard: NC-3 freefloat M-LOK compatible handguard
    • Upper Receiver: NC15 billet
    • Bolt Carrier: Black nitride 8620 steel slabside AR carrier with properly staked gas key
    • Bolt:  9310 MPI

    *ALL NFA RULES APPLY

    11.5″ 5.56 Complete Upper

    UPPER:

    • Caliber: 5.56 NATO
    • Barrel: 1-7 11.5″ 4150 Mil-B-11595E steel w/ M4 feed ramps and carbine length gas port – bead-blasted, QPQ finish and cryo-treated
    • Muzzle Device: NC flash hider, black finish
    • Gas Block: NC non-adjustable low-profile .750 dia.
    • Handguard: NC-3 freefloat M-LOK compatible handguard
    • Upper Receiver: NC15 billet
    • Bolt Carrier: Black nitride 8620 steel slabside AR carrier with properly staked gas key
    • Bolt:  9310 MPI

    *ALL NFA RULES APPLY

  • 16″ .223 Complete Upper

    Price: $1,200.00$1,250.00

    UPPER:

    • Caliber: .223 Wylde
    • Barrel: 1-8 16" stainless steel w/ M4 feed ramps and mid-length gas port - cryogenically-treated with Black Teflon finish
    • Muzzle Device: NC flash hider, black finish
    • Gas Block: NC non-adjustable low-profile .750 dia.
    • Handguard: NC-3 freefloat M-LOK compatible handguard - Rifle length, and XL available
    • Upper Receiver: NC15 billet
    • Bolt Carrier: Black nitride slabside AR carrier with properly staked gas key
    • Bolt:  9310 MPI

    16″ .223 Complete Upper

    UPPER:

    • Caliber: .223 Wylde
    • Barrel: 1-8 16" stainless steel w/ M4 feed ramps and mid-length gas port - cryogenically-treated with Black Teflon finish
    • Muzzle Device: NC flash hider, black finish
    • Gas Block: NC non-adjustable low-profile .750 dia.
    • Handguard: NC-3 freefloat M-LOK compatible handguard - Rifle length, and XL available
    • Upper Receiver: NC15 billet
    • Bolt Carrier: Black nitride slabside AR carrier with properly staked gas key
    • Bolt:  9310 MPI
  • 16″ .300BLK Complete Upper

    Price: $1,225.00$1,250.00

    UPPER:

    • Caliber: .300BLK
    • Barrel: 1-8 16" stainless steel w/ M4 feed ramps and carbine length gas port - cryogenically-treated with Black Teflon finish
    • Muzzle Device: NC flash hider, black finish
    • Gas Block: NC non-adjustable low-profile .750 dia.
    • Handguard: NC-3 freefloat M-LOK compatible handguard - Rifle length and XL available
    • Upper Receiver: NC15 billet
    • Bolt Carrier: Black nitride slabside AR carrier with properly staked gas key
    • Bolt:  9310 MPI

    16″ .300BLK Complete Upper

    UPPER:

    • Caliber: .300BLK
    • Barrel: 1-8 16" stainless steel w/ M4 feed ramps and carbine length gas port - cryogenically-treated with Black Teflon finish
    • Muzzle Device: NC flash hider, black finish
    • Gas Block: NC non-adjustable low-profile .750 dia.
    • Handguard: NC-3 freefloat M-LOK compatible handguard - Rifle length and XL available
    • Upper Receiver: NC15 billet
    • Bolt Carrier: Black nitride slabside AR carrier with properly staked gas key
    • Bolt:  9310 MPI
  • 18″ .223 Complete Upper

    Rated 5.00 out of 5
    Price: $1,250.00

    UPPER:

    • Caliber: .223 Wylde
    • Barrel: 1-8 18" stainless steel w/ M4 feed ramps and rifle length gas port - cryogenically-treated with Black Teflon coating
    • Muzzle Device: NC flash hider, black finish
    • Gas Block: NC non-adjustable low-profile .750 dia.
    • Handguard: NC-3 freefloat M-LOK compatible handguard - XL available
    • Upper Receiver: NC15 billet
    • Bolt Carrier: Black nitride slabside AR carrier with properly staked gas key
    • Bolt:  9310 MPI
    • Charging Handle: NC Heavy Duty handle

    18″ .223 Complete Upper

    UPPER:

    • Caliber: .223 Wylde
    • Barrel: 1-8 18" stainless steel w/ M4 feed ramps and rifle length gas port - cryogenically-treated with Black Teflon coating
    • Muzzle Device: NC flash hider, black finish
    • Gas Block: NC non-adjustable low-profile .750 dia.
    • Handguard: NC-3 freefloat M-LOK compatible handguard - XL available
    • Upper Receiver: NC15 billet
    • Bolt Carrier: Black nitride slabside AR carrier with properly staked gas key
    • Bolt:  9310 MPI
    • Charging Handle: NC Heavy Duty handle
  • NC10 .308 Complete Upper – 16″ Heavy Barrel

    Price: $1,850.00

    UPPER:

    Caliber: .308 Winchester
    Barrel: 1-10 16″ heavy-profile match grade stainless steel with rifle-length gas port – cryogenically-treated with Black Teflon finish
    Muzzle Device: NC flash hider, black finish
    Gas Block: NC adjustable low-profile .750 dia.
    Handguard: NC-308 freefloat M-LOK compatible 15" handguard
    Upper Receiver: NC10 billet
    Bolt Carrier: Black nitride 8620 slabside NC10 carrier with properly staked gas key
    Bolt: 9310 MPI

    NC10 .308 Complete Upper – 16″ Heavy Barrel

    UPPER:

    Caliber: .308 Winchester
    Barrel: 1-10 16″ heavy-profile match grade stainless steel with rifle-length gas port – cryogenically-treated with Black Teflon finish
    Muzzle Device: NC flash hider, black finish
    Gas Block: NC adjustable low-profile .750 dia.
    Handguard: NC-308 freefloat M-LOK compatible 15" handguard
    Upper Receiver: NC10 billet
    Bolt Carrier: Black nitride 8620 slabside NC10 carrier with properly staked gas key
    Bolt: 9310 MPI

  • NC10 Complete Upper – 16″ .308 Lightweight Barrel

    Price: $1,850.00

    UPPER:

    Caliber: .308 Winchester
    Barrel: 1-10 16″ lightweight match grade stainless steel with midlength gas port – cryogenically-treated with Black Teflon finish
    Muzzle Device: NC flash hider, black finish
    Gas Block: NC adjustable low-profile .750 dia.
    Handguard: NC-308 freefloat M-LOK compatible 15" handguard
    Upper Receiver: NC10 billet
    Bolt Carrier: Black nitride 8620 slabside NC10 carrier with properly staked gas key
    Bolt: 9310 MPI

    NC10 Complete Upper – 16″ .308 Lightweight Barrel

    UPPER:

    Caliber: .308 Winchester
    Barrel: 1-10 16″ lightweight match grade stainless steel with midlength gas port – cryogenically-treated with Black Teflon finish
    Muzzle Device: NC flash hider, black finish
    Gas Block: NC adjustable low-profile .750 dia.
    Handguard: NC-308 freefloat M-LOK compatible 15" handguard
    Upper Receiver: NC10 billet
    Bolt Carrier: Black nitride 8620 slabside NC10 carrier with properly staked gas key
    Bolt: 9310 MPI

  • NC10 Complete Upper – 18″ .308

    Price: $1,850.00

    UPPER:

    Caliber: .308 Winchester
    Barrel: 1-10 18″ light weight match grade stainless steel with rifle-length gas port – cryogenically-treated with Black Teflon finish
    Muzzle Device: NC flash hider, black finish
    Gas Block: NC adjustable low-profile .750 dia.
    Handguard: NC-308 freefloat M-LOK compatible 15" handguard
    Upper Receiver: NC10 billet
    Bolt Carrier: Black nitride 8620 slabside NC10 carrier with properly staked gas key
    Bolt: 9310 MPI

    NC10 Complete Upper – 18″ .308

    UPPER:

    Caliber: .308 Winchester
    Barrel: 1-10 18″ light weight match grade stainless steel with rifle-length gas port – cryogenically-treated with Black Teflon finish
    Muzzle Device: NC flash hider, black finish
    Gas Block: NC adjustable low-profile .750 dia.
    Handguard: NC-308 freefloat M-LOK compatible 15" handguard
    Upper Receiver: NC10 billet
    Bolt Carrier: Black nitride 8620 slabside NC10 carrier with properly staked gas key
    Bolt: 9310 MPI

  • 22RB Dedicated 22 Upper

    22RB Dedicated 22 Upper

    Rated 5.00 out of 5
    Price: $499.00$499.95

    Nordic Components' 22RB dedicated 22 upper receiver converts your standard AR-15 compatible system to a dedicated .22LR for recreational shooting, training, and hunting.  The 22RB is manufactured using the same materials as most standard AR15 rifles, ensuring that it is a dedicated 22 upper that looks and feels like a centerfire rifle.

    SUPPRESSOR READY!

    The 22RB's match-grade barrel also comes prepared to accept a suppressor - the barrel threads are cut to the proper spec for most popular .22 suppressors, and has a machined tenon to accommodate the O-rings found on certain suppressor models.

    Features:

    • 1-16 twist match barrel
    • A2 flash suppressor
    • Aluminum slim diameter hand guard
    • Aluminum upper
    • Stainless steel bolt
    • 10 round Black Dog magazine
    • Black Dog Machine Bolt Saver for retaining bolt carrier group when upper is separate from lower
    • 9.25 Pistol/SBR upper-all NFA rules apply

    *Will accept all Black Dog AR-15 .22 magazines

    Note: Recommended for use with fire control groups using hammers with mil-spec dimensions only.

    22RB Dedicated 22 Upper

    Nordic Components' 22RB dedicated 22 upper receiver converts your standard AR-15 compatible system to a dedicated .22LR for recreational shooting, training, and hunting.  The 22RB is manufactured using the same materials as most standard AR15 rifles, ensuring that it is a dedicated 22 upper that looks and feels like a centerfire rifle.

    SUPPRESSOR READY!

    The 22RB's match-grade barrel also comes prepared to accept a suppressor - the barrel threads are cut to the proper spec for most popular .22 suppressors, and has a machined tenon to accommodate the O-rings found on certain suppressor models.

    Features:

    • 1-16 twist match barrel
    • A2 flash suppressor
    • Aluminum slim diameter hand guard
    • Aluminum upper
    • Stainless steel bolt
    • 10 round Black Dog magazine
    • Black Dog Machine Bolt Saver for retaining bolt carrier group when upper is separate from lower
    • 9.25 Pistol/SBR upper-all NFA rules apply

    *Will accept all Black Dog AR-15 .22 magazines

    Note: Recommended for use with fire control groups using hammers with mil-spec dimensions only.

Vortex Optics

  • VIPER PST 6-24X50 RIFLESCOPE — EBR-2C RETICLE (MOA)-First Focal Plane – PST-43127

    Price: $949.00

    VIPER PST 6-24X50 RIFLESCOPE —

    EBR-2C RETICLE (MOA)

    First Focal Plane

    The Viper PST (Precision Shooting Tactical) riflescope boasts features associated with top-tier riflescopes, yet comes in at a street price under the $1,000 mark. Matching reticle and turret measurements allow accurate, fast dialing of shots. The one-piece 30mm tube, precision-machined from a single solid block of aircraft-grade 6061-T6 aluminum, offers ample windage and elevation adjustment. Born from an intimate understanding of riflescope design, forward-thinking engineering, and open ears to a market incredibly vocal about what it wants in a riflescope, the Viper PST series delivers the performance and features tactical shooters demand at an economical price.

    VIPER PST 6-24X50 RIFLESCOPE — EBR-2C RETICLE (MOA)-First Focal Plane – PST-43127

    VIPER PST 6-24X50 RIFLESCOPE —

    EBR-2C RETICLE (MOA)

    First Focal Plane

    The Viper PST (Precision Shooting Tactical) riflescope boasts features associated with top-tier riflescopes, yet comes in at a street price under the $1,000 mark. Matching reticle and turret measurements allow accurate, fast dialing of shots. The one-piece 30mm tube, precision-machined from a single solid block of aircraft-grade 6061-T6 aluminum, offers ample windage and elevation adjustment. Born from an intimate understanding of riflescope design, forward-thinking engineering, and open ears to a market incredibly vocal about what it wants in a riflescope, the Viper PST series delivers the performance and features tactical shooters demand at an economical price.

  • VORTEX Strike Eagle 1-6×24 AR-BDC

    Price: $350.00

    STRIKE EAGLE 1-6X24 RIFLESCOPE

    Speed and versatility—that’s what 1x variable optics offer AR shooters who need to engage targets from point-blank out to extended ranges. And that’s exactly what you’re going to get with Vortex’s new Strike Eagle 1-6 x 24. Take into consideration what it costs to get into this optic, and you may find you can’t afford not to buy it.

    Whether you’re burning through a 3-Gun Stage, logging some range time, or holding for hair on a coyote you’ve duped into thinking you’re lunch, the Strike Eagle is up to the task. High-quality, fully multi-coated lenses deliver a clear, crisp sight picture and optimal low-light performance. A true one-power on the low end of its 6x zoom range provides quick target acquisition in close quarters scenarios. Need to engage targets at distance? Crank it up to 6x and let it rip.

    VORTEX Strike Eagle 1-6×24 AR-BDC

    STRIKE EAGLE 1-6X24 RIFLESCOPE

    Speed and versatility—that’s what 1x variable optics offer AR shooters who need to engage targets from point-blank out to extended ranges. And that’s exactly what you’re going to get with Vortex’s new Strike Eagle 1-6 x 24. Take into consideration what it costs to get into this optic, and you may find you can’t afford not to buy it.

    Whether you’re burning through a 3-Gun Stage, logging some range time, or holding for hair on a coyote you’ve duped into thinking you’re lunch, the Strike Eagle is up to the task. High-quality, fully multi-coated lenses deliver a clear, crisp sight picture and optimal low-light performance. A true one-power on the low end of its 6x zoom range provides quick target acquisition in close quarters scenarios. Need to engage targets at distance? Crank it up to 6x and let it rip.

  • VORTEX Switchview SV-4 for Strike Eagle

    Price: $64.99

    Maximize the efficiency of magnification transitions with fluid precision using Vortex's SV-4 Switchview Throw Lever. The Switchview attaches and detaches easily to the magnification ring. Constructed of skeletonized, lightweight hard-anodized aluminum, the SV-4 is one tough accessory that will serve you well.

    Compatible with Strike Eagle 1-6x, and select riflescope magnification rings with a diameter of 1.72 inches / 44 mm.

    VORTEX Switchview SV-4 for Strike Eagle

    Maximize the efficiency of magnification transitions with fluid precision using Vortex's SV-4 Switchview Throw Lever. The Switchview attaches and detaches easily to the magnification ring. Constructed of skeletonized, lightweight hard-anodized aluminum, the SV-4 is one tough accessory that will serve you well.

    Compatible with Strike Eagle 1-6x, and select riflescope magnification rings with a diameter of 1.72 inches / 44 mm.

  • Vortex Viper HS LR 6-24×50 FFP

    Price: $899.99

    Want to extend your effective shooting range at distances where bullet drop and wind drift become critical? Take a look at the Viper HS LR riflescope. The LR stands for long range — and we mean it. This riflescope features an exposed target-style elevation turret built for dialing elevation at extended ranges. The capped windage turret maintains the scope’s sleek lines and prevent it from hanging up on clothing, rifle cases or pack scabbards.

    Viper HS LR riflescopes feature an advanced optical system highlighted with a 4x zoom range for magnification versatility. A forgiving eye box with increased eye relief gets shooters on target quickly and easily. Built on an ultra-strong 30mm one-piece machined aluminum tube for increased windage and elevation travel and optimal adjustment.

    Vortex Viper HS LR 6-24×50 FFP

    Want to extend your effective shooting range at distances where bullet drop and wind drift become critical? Take a look at the Viper HS LR riflescope. The LR stands for long range — and we mean it. This riflescope features an exposed target-style elevation turret built for dialing elevation at extended ranges. The capped windage turret maintains the scope’s sleek lines and prevent it from hanging up on clothing, rifle cases or pack scabbards.

    Viper HS LR riflescopes feature an advanced optical system highlighted with a 4x zoom range for magnification versatility. A forgiving eye box with increased eye relief gets shooters on target quickly and easily. Built on an ultra-strong 30mm one-piece machined aluminum tube for increased windage and elevation travel and optimal adjustment.

  • Vortex Viper PST 2.5-10×32 FFP Riflescope – EBR-1 MRAD Reticle

    Price: $799.00

    Viper PST 2.5-10×32 FFP Riflescope

    The Viper PST (Precision Shooting Tactical) riflescope boasts features associated with top-tier riflescopes, yet comes in at a street price under the $1,000 mark. Matching reticle and turret measurements allow accurate, fast dialing of shots. The one-piece 30mm tube, precision-machined from a single solid block of aircraft-grade 6061-T6 aluminum, offers ample windage and elevation adjustment. Born from an intimate understanding of riflescope design, forward-thinking engineering, and open ears to a market incredibly vocal about what it wants in a riflescope, the Viper PST series delivers the performance and features tactical shooters demand at an economical price.

    Vortex Viper PST 2.5-10×32 FFP Riflescope – EBR-1 MRAD Reticle

    Viper PST 2.5-10×32 FFP Riflescope

    The Viper PST (Precision Shooting Tactical) riflescope boasts features associated with top-tier riflescopes, yet comes in at a street price under the $1,000 mark. Matching reticle and turret measurements allow accurate, fast dialing of shots. The one-piece 30mm tube, precision-machined from a single solid block of aircraft-grade 6061-T6 aluminum, offers ample windage and elevation adjustment. Born from an intimate understanding of riflescope design, forward-thinking engineering, and open ears to a market incredibly vocal about what it wants in a riflescope, the Viper PST series delivers the performance and features tactical shooters demand at an economical price.

  • VORTEX-30mm Riflescope Rings

    Price: $19.99

    The Vortex 30mm riflescope rings mount on Picatinny or Weaver type rails. Made from aircraft-grade 6061-T6 aluminum for optimum strength.

    Sold as a set of two rings.

    • Tighten rail mount bolt to 35 inch pounds.
    • Tighten scope ring fasteners to 22 inch pounds.

    Low positions the center of the riflescope tube at a height of 0.75 inches (19mm) from the base.

    Medium positions the center of the riflescope tube at a height of 0.94 inches (24mm) from the base.

    High positions the center of the riflescope tube at a height of 1.22 inches (31mm) from the base.


    Vortex Limited Lifetime Warranty:
    All limited lifetime warranted products will be repaired or replaced at no charge for any manufacturer defects.

    VORTEX-30mm Riflescope Rings

    The Vortex 30mm riflescope rings mount on Picatinny or Weaver type rails. Made from aircraft-grade 6061-T6 aluminum for optimum strength.

    Sold as a set of two rings.

    • Tighten rail mount bolt to 35 inch pounds.
    • Tighten scope ring fasteners to 22 inch pounds.

    Low positions the center of the riflescope tube at a height of 0.75 inches (19mm) from the base.

    Medium positions the center of the riflescope tube at a height of 0.94 inches (24mm) from the base.

    High positions the center of the riflescope tube at a height of 1.22 inches (31mm) from the base.


    Vortex Limited Lifetime Warranty:
    All limited lifetime warranted products will be repaired or replaced at no charge for any manufacturer defects.

  • VORTEX-Precision Matched Rings-34mm

    Price: $149.99

    We start with certified USA 7075 T6 billet aluminum and hold it to an extremely tight tolerance of .0005 using our precision Computer Numeric Controlled (CNC) mill. Our Precision Matched Rings are kept in pairs throughout the manufacturing process — ensuring perfection from one set to another. These Vortex rings are then serialized, vibratory tumbled, hand-bead blasted and finished off with a Type III hard coat anodize. Sold two rings per package. Hex wrench included.

    • Rugged, lightweight, anti-snag design
    • Robust, Grade 8 fasteners
    • 100% made in USA guaranteed for life

    Low: Positions the center of the riflescope tube at a height of 0.92 inches (23.4 mm) from the base.

    Medium: Positions the center of the riflescope tube at a height of 1.00 inches (25.4 mm) from the base.

    High: Positions the center of the riflescope tube at a height of 1.26 inches (32 mm) from the base.


    Vortex Limited Lifetime Warranty:
    All limited lifetime warranted products will be repaired or replaced at no charge for any manufacturer defects.

    VORTEX-Precision Matched Rings-34mm

    We start with certified USA 7075 T6 billet aluminum and hold it to an extremely tight tolerance of .0005 using our precision Computer Numeric Controlled (CNC) mill. Our Precision Matched Rings are kept in pairs throughout the manufacturing process — ensuring perfection from one set to another. These Vortex rings are then serialized, vibratory tumbled, hand-bead blasted and finished off with a Type III hard coat anodize. Sold two rings per package. Hex wrench included.

    • Rugged, lightweight, anti-snag design
    • Robust, Grade 8 fasteners
    • 100% made in USA guaranteed for life

    Low: Positions the center of the riflescope tube at a height of 0.92 inches (23.4 mm) from the base.

    Medium: Positions the center of the riflescope tube at a height of 1.00 inches (25.4 mm) from the base.

    High: Positions the center of the riflescope tube at a height of 1.26 inches (32 mm) from the base.


    Vortex Limited Lifetime Warranty:
    All limited lifetime warranted products will be repaired or replaced at no charge for any manufacturer defects.

  • VORTEX-Precision Matched Rings-35mm

    Price: $149.99

    We start with certified USA 7075 T6 billet aluminum and hold it to an extremely tight tolerance of .0005 using our precision Computer Numeric Controlled (CNC) mill. Our Precision Matched Rings are kept in pairs throughout the manufacturing process — ensuring perfection from one set to another. These Vortex rings are then serialized, vibratory tumbled, hand-bead blasted and finished off with a Type III hard coat anodize. Sold two rings per package. Hex wrench included.

    • Rugged, lightweight, anti-snag design
    • Robust, Grade 8 fasteners
    • 100% made in USA guaranteed for life

    Low: Positions the center of the riflescope tube at a height of 0.95 inches (24.13 mm) from the base.

    Medium: Positions the center of the riflescope tube at a height of 1.00 inches (25.4 mm) from the base.

    High: Positions the center of the riflescope tube at a height of 1.26 inches (32 mm) from the base.


    Vortex Limited Lifetime Warranty:
    All limited lifetime warranted products will be repaired or replaced at no charge for any manufacturer defects.

    VORTEX-Precision Matched Rings-35mm

    We start with certified USA 7075 T6 billet aluminum and hold it to an extremely tight tolerance of .0005 using our precision Computer Numeric Controlled (CNC) mill. Our Precision Matched Rings are kept in pairs throughout the manufacturing process — ensuring perfection from one set to another. These Vortex rings are then serialized, vibratory tumbled, hand-bead blasted and finished off with a Type III hard coat anodize. Sold two rings per package. Hex wrench included.

    • Rugged, lightweight, anti-snag design
    • Robust, Grade 8 fasteners
    • 100% made in USA guaranteed for life

    Low: Positions the center of the riflescope tube at a height of 0.95 inches (24.13 mm) from the base.

    Medium: Positions the center of the riflescope tube at a height of 1.00 inches (25.4 mm) from the base.

    High: Positions the center of the riflescope tube at a height of 1.26 inches (32 mm) from the base.


    Vortex Limited Lifetime Warranty:
    All limited lifetime warranted products will be repaired or replaced at no charge for any manufacturer defects.

  • VORTEX-Viper PST 4-16×50 FFP Riflescope With EBR-1 MRAD Reticle

    Price: $899.00

    The Viper PST (Precision Shooting Tactical) riflescope boasts features associated with top-tier riflescopes, yet comes in at a street price under the $1,000 mark. Matching reticle and turret measurements allow accurate, fast dialing of shots. The one-piece 30mm tube, precision-machined from a single solid block of aircraft-grade 6061-T6 aluminum, offers ample windage and elevation adjustment. Born from an intimate understanding of riflescope design, forward-thinking engineering, and open ears to a market incredibly vocal about what it wants in a riflescope, the Viper PST series delivers the performance and features tactical shooters demand at an economical price.

    Optical Features

    First Focal Plane Subtensions remain consistent throughout the magnification range.
    Optically Indexed Lenses Delivers optimum image sharpness and brightness with true reticle use for full ranging and holdover from edge to edge because of computer-controlled alignment during construction.
    XD Lens Elements Extra-low dispersion (XD) glass increases resolution and color fidelity, resulting in crisp, sharp images.
    XR Lens Coatings Vortex proprietary XR fully multi-coated lens coatings increase light transmission for maximum brightness.

    Construction Features

    30 mm Tube Provides greater strength and wider adjustment lattitude as compared to a 1-inch tube.
    One-Piece Tube Maximizes alignment for improved accuracy and optimum visual performance as well as strength and waterproofness.
    Aircraft-Grade Aluminum Construction from a solid block of 6061-T6 aircraft-grade aluminum delivers increased strength and rigidity.
    Waterproof o-ring seals prevent moisture, dust, and debris from getting inside the tube for reliable performance in all environments.
    Fogproof Filled with argon gas to inhibit internal fogging over a wide range of temperatures.
    Shockproof Lenses are locked in place, fore and aft, with machined locking rings to remain in perfect alignment and withstand recoil and impact.
    Hard Anodized Finish Hard-coat anodization is durable; the low-glare matte helps camouflage the shooter’s position.
    ArmorTek Ultra-hard, scratch-resistant coating protects exterior lenses from scratches, oil and dirt.

    Internal Mechanism Design Features

    CRS Zero Stop Customizable Rotational Stop (CRS) prevents dialing more than one rotation below your zero so you don't lose the zero when dialing large amounts of elevation corrections. Patent pending.
    Tall Uncapped Turrets Make range calculation and shooting adjustments fast and accurate with subtension marks that match the reticle .
    First Focal Plane Reticle Scale of reticle remains in proportion to the zoomed image. Constant subtensions allow accurate holdover and ranging at all magnifications—no shift in point of impact during zoom.
    Single Spring Construction Fully constrains (without over-constraining) the optical system for predictable, improved accuracy throughout the range of elevation adjustment.
    Glass-etched Reticle Protected between two layers of glass (not made from wire) for optimum durability and reliability.
    Illuminated Reticle Professional-grade illumination: designed for daytime, low light and night vision devices. The top three settings (8, 9, 10) will be visible in the daytime, depending on the background color. Settings below 8 are for low light use when the user's eyes have adjusted to the lower light levels. Lowest settings are intended for use with night vision devices.
    Illumination Control Can be turned on or off with a single click between each intensity level—allowing access to a preferred illumination setting without having to progress through each intensity level. Positioned at 45 degrees off the left side of the eyepiece for easy adjustment without blocking view of the turret setting or magnification.

    Convenience Features

    MAG-View Combines a fiber optics magnification indicator with raised rear-facing magnification references for clear viewing in low light conditions. Patent 7,937,879
    Radius Bar Fiber optic turret rotation indicator provides illuminated and tactile point of reference for turret rotations. Patent 7,937,879
    Fast Focus Eyepiece Allows quick and easy reticle focusing.
    Side Parallax Uses an adjustment mechanism on the left side of the riflescope to fine-tune focus to eliminate parallax

     

    Magnification 4-16 x
    Objective Lens Diameter 50 mm
    Eye Relief 4 inches
    Field of View 27.4-7.4 feet/100 yards
    Tube Size 30 mm
    Turret Style Tall Uncapped - CRS Zero Stop
    Adjustment Graduation .1 mrad
    Travel per Rotation 5 mrad
    Max Elevation Adjustment 21 mrads
    Max Windage Adjustment 21 mrads
    Parallax Setting 50 yards to infinity
    Length 13.7 inches
    Weight 22 ounces

    INCLUDED

    • 4-inch sunshade
    • CR2032 battery
    • CRS shims

    sub_pst_f_4-16x50_ebr1_mrad

    VORTEX-Viper PST 4-16×50 FFP Riflescope With EBR-1 MRAD Reticle

    The Viper PST (Precision Shooting Tactical) riflescope boasts features associated with top-tier riflescopes, yet comes in at a street price under the $1,000 mark. Matching reticle and turret measurements allow accurate, fast dialing of shots. The one-piece 30mm tube, precision-machined from a single solid block of aircraft-grade 6061-T6 aluminum, offers ample windage and elevation adjustment. Born from an intimate understanding of riflescope design, forward-thinking engineering, and open ears to a market incredibly vocal about what it wants in a riflescope, the Viper PST series delivers the performance and features tactical shooters demand at an economical price.

    Optical Features

    First Focal Plane Subtensions remain consistent throughout the magnification range.
    Optically Indexed Lenses Delivers optimum image sharpness and brightness with true reticle use for full ranging and holdover from edge to edge because of computer-controlled alignment during construction.
    XD Lens Elements Extra-low dispersion (XD) glass increases resolution and color fidelity, resulting in crisp, sharp images.
    XR Lens Coatings Vortex proprietary XR fully multi-coated lens coatings increase light transmission for maximum brightness.

    Construction Features

    30 mm Tube Provides greater strength and wider adjustment lattitude as compared to a 1-inch tube.
    One-Piece Tube Maximizes alignment for improved accuracy and optimum visual performance as well as strength and waterproofness.
    Aircraft-Grade Aluminum Construction from a solid block of 6061-T6 aircraft-grade aluminum delivers increased strength and rigidity.
    Waterproof o-ring seals prevent moisture, dust, and debris from getting inside the tube for reliable performance in all environments.
    Fogproof Filled with argon gas to inhibit internal fogging over a wide range of temperatures.
    Shockproof Lenses are locked in place, fore and aft, with machined locking rings to remain in perfect alignment and withstand recoil and impact.
    Hard Anodized Finish Hard-coat anodization is durable; the low-glare matte helps camouflage the shooter’s position.
    ArmorTek Ultra-hard, scratch-resistant coating protects exterior lenses from scratches, oil and dirt.

    Internal Mechanism Design Features

    CRS Zero Stop Customizable Rotational Stop (CRS) prevents dialing more than one rotation below your zero so you don't lose the zero when dialing large amounts of elevation corrections. Patent pending.
    Tall Uncapped Turrets Make range calculation and shooting adjustments fast and accurate with subtension marks that match the reticle .
    First Focal Plane Reticle Scale of reticle remains in proportion to the zoomed image. Constant subtensions allow accurate holdover and ranging at all magnifications—no shift in point of impact during zoom.
    Single Spring Construction Fully constrains (without over-constraining) the optical system for predictable, improved accuracy throughout the range of elevation adjustment.
    Glass-etched Reticle Protected between two layers of glass (not made from wire) for optimum durability and reliability.
    Illuminated Reticle Professional-grade illumination: designed for daytime, low light and night vision devices. The top three settings (8, 9, 10) will be visible in the daytime, depending on the background color. Settings below 8 are for low light use when the user's eyes have adjusted to the lower light levels. Lowest settings are intended for use with night vision devices.
    Illumination Control Can be turned on or off with a single click between each intensity level—allowing access to a preferred illumination setting without having to progress through each intensity level. Positioned at 45 degrees off the left side of the eyepiece for easy adjustment without blocking view of the turret setting or magnification.

    Convenience Features

    MAG-View Combines a fiber optics magnification indicator with raised rear-facing magnification references for clear viewing in low light conditions. Patent 7,937,879
    Radius Bar Fiber optic turret rotation indicator provides illuminated and tactile point of reference for turret rotations. Patent 7,937,879
    Fast Focus Eyepiece Allows quick and easy reticle focusing.
    Side Parallax Uses an adjustment mechanism on the left side of the riflescope to fine-tune focus to eliminate parallax

     

    Magnification 4-16 x
    Objective Lens Diameter 50 mm
    Eye Relief 4 inches
    Field of View 27.4-7.4 feet/100 yards
    Tube Size 30 mm
    Turret Style Tall Uncapped - CRS Zero Stop
    Adjustment Graduation .1 mrad
    Travel per Rotation 5 mrad
    Max Elevation Adjustment 21 mrads
    Max Windage Adjustment 21 mrads
    Parallax Setting 50 yards to infinity
    Length 13.7 inches
    Weight 22 ounces

    INCLUDED

    • 4-inch sunshade
    • CR2032 battery
    • CRS shims

    sub_pst_f_4-16x50_ebr1_mrad

Shotgun - 20ga Extension Nuts

Shotgun - 20ga Extension Tubes

  • Extension Tube Springs 12ga/20ga

    Rated 5.00 out of 5
    Price: $12.93$13.43

    Replacement spring for shotgun magazine extensions.

    • Spring has extra length to allow fitting to magazine
    • Ships coiled in package with instructions for determining length and cutting
    • Available in standard and heavy-duty strengths for 12ga, standard strength for 20ga

    Extension Tube Springs 12ga/20ga

    Replacement spring for shotgun magazine extensions.

    • Spring has extra length to allow fitting to magazine
    • Ships coiled in package with instructions for determining length and cutting
    • Available in standard and heavy-duty strengths for 12ga, standard strength for 20ga
  • Shotgun Extension Tube End Cap 12ga/20ga

    Price: $15.85

    Machined aluminum end cap for Nordic Components MXT shotgun magazine extensions.

    Shotgun Extension Tube End Cap 12ga/20ga

    Machined aluminum end cap for Nordic Components MXT shotgun magazine extensions.

  • Shotgun Extension Tube Kit, 20ga.

    Price: $75.60

    Nordic Components shotgun magazine extension tube kit for increasing magazine capacity.  Used in conjunction with the 20 gauge extension tube nut, this tube kit will add the listed number of rounds to your existing magazine capacity.  All capacities are measured using 2.75" star-crimped shells; for use with 3" or 3.5", increase your selection by one or two rounds.

    Kits ship with extension tube, tube cap, and full-length spring (+1 tubes have an integral cap and will not include a separate cap).   To determine the length of the extension in relation to your shotgun, reference the measurement diagram and dimension table below.  Note that the tube nut will add between .750" and 1.000" depending on the shotgun model.

    THIS PRODUCT REQUIRES AN 20GA EXTENSION TUBE NUT TO BE INSTALLED ON YOUR SHOTGUN -- THIS TUBE KIT WILL NOT ATTACH WITHOUT THE NUT

     

    Barrel_Ext_Measurement_Illustration

    Note:  May require modification of shotgun for installation and/or proper function.  Any spring/follower retention devices will have to be removed to allow extension to function.

    Attention Washington, D.C. Residents: We will not ship any magazine tube extension or magazine extension tube component into, Washington D.C. due to current regulations.

    Shotgun Extension Tube Kit, 20ga.

    Nordic Components shotgun magazine extension tube kit for increasing magazine capacity.  Used in conjunction with the 20 gauge extension tube nut, this tube kit will add the listed number of rounds to your existing magazine capacity.  All capacities are measured using 2.75" star-crimped shells; for use with 3" or 3.5", increase your selection by one or two rounds.

    Kits ship with extension tube, tube cap, and full-length spring (+1 tubes have an integral cap and will not include a separate cap).   To determine the length of the extension in relation to your shotgun, reference the measurement diagram and dimension table below.  Note that the tube nut will add between .750" and 1.000" depending on the shotgun model.

    THIS PRODUCT REQUIRES AN 20GA EXTENSION TUBE NUT TO BE INSTALLED ON YOUR SHOTGUN -- THIS TUBE KIT WILL NOT ATTACH WITHOUT THE NUT

     

    Barrel_Ext_Measurement_Illustration

    Note:  May require modification of shotgun for installation and/or proper function.  Any spring/follower retention devices will have to be removed to allow extension to function.

    Attention Washington, D.C. Residents: We will not ship any magazine tube extension or magazine extension tube component into, Washington D.C. due to current regulations.

  • Sale!

    Shotgun Extension, Tube Only, 20ga.

    Price: $16.60

    Nordic Components MXT extension tube for 20 gauge shotguns.

    • Available in variety of lengths between +4 and +7 (shell capacity measured with 2 3/4″ shells and may vary with shells of differing length)
    • Includes ONLY MXT tube
    • May require purchase of new magazine spring if you are changing the capacity of your existing extension

    Barrel_Ext_Measurement_Illustration

    *Some shotgun magazine tubes may require minor modification. Call us if you are having problems fitting our extension tubes to your shotgun.

    Attention Washington D.C. Residents: We will not ship any magazine tube extension or magazine extension tube component into Washington D.C. due to current regulations.

    Shotgun Extension, Tube Only, 20ga.

    Nordic Components MXT extension tube for 20 gauge shotguns.

    • Available in variety of lengths between +4 and +7 (shell capacity measured with 2 3/4″ shells and may vary with shells of differing length)
    • Includes ONLY MXT tube
    • May require purchase of new magazine spring if you are changing the capacity of your existing extension

    Barrel_Ext_Measurement_Illustration

    *Some shotgun magazine tubes may require minor modification. Call us if you are having problems fitting our extension tubes to your shotgun.

    Attention Washington D.C. Residents: We will not ship any magazine tube extension or magazine extension tube component into Washington D.C. due to current regulations.

Shotgun - Barrel Clamps and Clamp Accessories

Barrel Clamps and Clamp Accessories
  • Beretta 1301 Tactical Barrel Clamp

    Price: $32.81

    The Nordic Components Beretta 1301 Tactical barrel clamp provides extra rigidity for your magazine extension.  Designed with shorter barrel fingers to clear the fixed front sight on the 1301 Tactical.  Features 10-32 threaded hole for mounting Picatinny rails or other accessories.  Designed for Nordic extension tubes (1.060" diameter) but may be compatible with other models.

    Note:  The shotgun barrel clamp makes contact with your barrel and may damage/wear the finish on your barrel with use. We recommend using masking tape applied to the inside of the clamp fingers that contact the barrel to alleviate finish wear. Because we have no control over the installation of this product, Nordic Components is not responsible for any resulting wear or damage. Do not apply anything to the clamp fingers that contact the magazine tube.

    Beretta 1301 Tactical Barrel Clamp

    The Nordic Components Beretta 1301 Tactical barrel clamp provides extra rigidity for your magazine extension.  Designed with shorter barrel fingers to clear the fixed front sight on the 1301 Tactical.  Features 10-32 threaded hole for mounting Picatinny rails or other accessories.  Designed for Nordic extension tubes (1.060" diameter) but may be compatible with other models.

    Note:  The shotgun barrel clamp makes contact with your barrel and may damage/wear the finish on your barrel with use. We recommend using masking tape applied to the inside of the clamp fingers that contact the barrel to alleviate finish wear. Because we have no control over the installation of this product, Nordic Components is not responsible for any resulting wear or damage. Do not apply anything to the clamp fingers that contact the magazine tube.

  • Beretta 1301 Tactical Barrel Clamp with Picatinny Rail

    Price: $45.66

    The Nordic Components Beretta 1301 Tactical barrel clamp provides extra rigidity for your magazine extension.  Designed with shorter barrel fingers to clear the fixed front sight on the 1301 Tactical.  Includes Picatinny rail and mounting screw.  Designed for Nordic extension tubes (1.060" diameter) but may be compatible with other models.

    Note:  The shotgun barrel clamp makes contact with your barrel and may damage/wear the finish on your barrel with use. We recommend using masking tape applied to the inside of the clamp fingers that contact the barrel to alleviate finish wear. Because we have no control over the installation of this product, Nordic Components is not responsible for any resulting wear or damage. Do not apply anything to the clamp fingers that contact the magazine tube.

    Beretta 1301 Tactical Barrel Clamp with Picatinny Rail

    The Nordic Components Beretta 1301 Tactical barrel clamp provides extra rigidity for your magazine extension.  Designed with shorter barrel fingers to clear the fixed front sight on the 1301 Tactical.  Includes Picatinny rail and mounting screw.  Designed for Nordic extension tubes (1.060" diameter) but may be compatible with other models.

    Note:  The shotgun barrel clamp makes contact with your barrel and may damage/wear the finish on your barrel with use. We recommend using masking tape applied to the inside of the clamp fingers that contact the barrel to alleviate finish wear. Because we have no control over the installation of this product, Nordic Components is not responsible for any resulting wear or damage. Do not apply anything to the clamp fingers that contact the magazine tube.

  • Heavy-Wall (Mossberg) Barrel Clamp with Picatinny Rail, 12ga.

    Price: $48.69

    The Nordic Components heavy-walled shotgun barrel clamp provides extra rigidity for your magazine extension.  Includes Picatinny rail and mounting screw.  Suitable for use with Mossberg 590/590A1/835/935, Benelli Nova/Supernova, and other shotguns with heavy/overbored barrels or larger barrel-to-magazine offset.

    Not compatible with:

    • Browning Auto-5, Remington Model 11, Savage 720/725, or any other shotguns with reciprocating barrels

    Designed for Nordic extension tubes (1.060" diameter) but may be compatible with other models.

    Note:  The shotgun barrel clamp makes contact with your barrel and may damage/wear the finish on your barrel with use. We recommend using masking tape applied to the inside of the clamp fingers that contact the barrel to alleviate finish wear. Because we have no control over the installation of this product, Nordic Components is not responsible for any resulting wear or damage. Do not apply anything to the clamp fingers that contact the magazine tube.

    Heavy-Wall (Mossberg) Barrel Clamp with Picatinny Rail, 12ga.

    The Nordic Components heavy-walled shotgun barrel clamp provides extra rigidity for your magazine extension.  Includes Picatinny rail and mounting screw.  Suitable for use with Mossberg 590/590A1/835/935, Benelli Nova/Supernova, and other shotguns with heavy/overbored barrels or larger barrel-to-magazine offset.

    Not compatible with:

    • Browning Auto-5, Remington Model 11, Savage 720/725, or any other shotguns with reciprocating barrels

    Designed for Nordic extension tubes (1.060" diameter) but may be compatible with other models.

    Note:  The shotgun barrel clamp makes contact with your barrel and may damage/wear the finish on your barrel with use. We recommend using masking tape applied to the inside of the clamp fingers that contact the barrel to alleviate finish wear. Because we have no control over the installation of this product, Nordic Components is not responsible for any resulting wear or damage. Do not apply anything to the clamp fingers that contact the magazine tube.

  • Heavy-Wall (Mossberg) Barrel Clamp, 12ga

    Price: $35.83

    The Nordic Components heavy-walled shotgun barrel clamp provides extra rigidity for your magazine extension.  Features 10-32 threaded hole for mounting Picatinny rails or other accessories.  Suitable for use with Mossberg 590/590A1/835/935, Benelli Nova/Supernova, and other shotguns with heavy/overbored barrels or larger barrel-to-magazine offset.

    Not compatible with:

    • Browning Auto-5, Remington Model 11, Savage 720/725, or any other shotguns with reciprocating barrels

    Designed for Nordic extension tubes (1.060" diameter) but may be compatible with other models.

    Note:  The shotgun barrel clamp makes contact with your barrel and may damage/wear the finish on your barrel with use. We recommend using masking tape applied to the inside of the clamp fingers that contact the barrel to alleviate finish wear. Because we have no control over the installation of this product, Nordic Components is not responsible for any resulting wear or damage. Do not apply anything to the clamp fingers that contact the magazine tube.

    Heavy-Wall (Mossberg) Barrel Clamp, 12ga

    The Nordic Components heavy-walled shotgun barrel clamp provides extra rigidity for your magazine extension.  Features 10-32 threaded hole for mounting Picatinny rails or other accessories.  Suitable for use with Mossberg 590/590A1/835/935, Benelli Nova/Supernova, and other shotguns with heavy/overbored barrels or larger barrel-to-magazine offset.

    Not compatible with:

    • Browning Auto-5, Remington Model 11, Savage 720/725, or any other shotguns with reciprocating barrels

    Designed for Nordic extension tubes (1.060" diameter) but may be compatible with other models.

    Note:  The shotgun barrel clamp makes contact with your barrel and may damage/wear the finish on your barrel with use. We recommend using masking tape applied to the inside of the clamp fingers that contact the barrel to alleviate finish wear. Because we have no control over the installation of this product, Nordic Components is not responsible for any resulting wear or damage. Do not apply anything to the clamp fingers that contact the magazine tube.

  • Picatinny Rail for Barrel Clamp

    Price: $16.32

    Nordic Components Mini-Tac Rail

    Picatinny Rail for Barrel Clamp

    Nordic Components Mini-Tac Rail

  • Recessed Plunger Heavy Duty Push Button Swivel (QDA)

    Price: $8.95

    Quick detach sling swivel for mounting to Nordic Components mounting plates or other QD mounts.

    • Release button flush to top of swivel body to minimize unintentional release
    • Pull-tested to over 300 pounds
    • Designed for 1 1/4" sling or smaller
    • Durable manganese phosphate finish

     

    Recessed Plunger Heavy Duty Push Button Swivel (QDA)

    Quick detach sling swivel for mounting to Nordic Components mounting plates or other QD mounts.

    • Release button flush to top of swivel body to minimize unintentional release
    • Pull-tested to over 300 pounds
    • Designed for 1 1/4" sling or smaller
    • Durable manganese phosphate finish

     

  • Shotgun QD mount for Barrel Clamp

    Shotgun QD Mount for Shotgun Barrel Clamps

    Price: $21.02

    Shotgun QD mount plate for attaching to Nordic Components shotgun barrel clamp.

    • Allows mounting quick-detach (QD) sling swivel directly to barrel clamp without tactical rail
    • Provides forward shotgun QD mount location
    • Compatible with all Nordic Components barrel clamps
    • Does not obstruct access to clamp assembly screws
    • Includes one #10-32 screw for mounting (does not include sling swivel)

     

    Shotgun QD Mount for Shotgun Barrel Clamps

    Shotgun QD mount plate for attaching to Nordic Components shotgun barrel clamp.

    • Allows mounting quick-detach (QD) sling swivel directly to barrel clamp without tactical rail
    • Provides forward shotgun QD mount location
    • Compatible with all Nordic Components barrel clamps
    • Does not obstruct access to clamp assembly screws
    • Includes one #10-32 screw for mounting (does not include sling swivel)

     

  • Standard Barrel Clamp with Picatinny Rail, 12ga.

    Price: $45.66

    The Nordic Components shotgun barrel clamp provides extra rigidity for your magazine extension.  Includes Picatinny rail and mounting screw.  Fits most shotguns when used with a Nordic Components Extension.

    Not compatible with:

    • Mossberg 590/590A1, 835, 935 shotguns (requires heavy-wall barrel clamp)
    • Benelli Nova/Supernova (requires heavy-wall barrel clamp)
    • Browning Auto-5, Remington Model 11, Savage 720/725, or any other shotguns with reciprocating barrels

    Designed for Nordic extension tubes (1.060" diameter) but may be compatible with other models.

    Note:  The shotgun barrel clamp makes contact with your barrel and may damage/wear the finish on your barrel with use. We recommend using masking tape applied to the inside of the clamp fingers that contact the barrel to alleviate finish wear. Because we have no control over the installation of this product, Nordic Components is not responsible for any resulting wear or damage. Do not apply anything to the clamp fingers that contact the magazine tube.

    Standard Barrel Clamp with Picatinny Rail, 12ga.

    The Nordic Components shotgun barrel clamp provides extra rigidity for your magazine extension.  Includes Picatinny rail and mounting screw.  Fits most shotguns when used with a Nordic Components Extension.

    Not compatible with:

    • Mossberg 590/590A1, 835, 935 shotguns (requires heavy-wall barrel clamp)
    • Benelli Nova/Supernova (requires heavy-wall barrel clamp)
    • Browning Auto-5, Remington Model 11, Savage 720/725, or any other shotguns with reciprocating barrels

    Designed for Nordic extension tubes (1.060" diameter) but may be compatible with other models.

    Note:  The shotgun barrel clamp makes contact with your barrel and may damage/wear the finish on your barrel with use. We recommend using masking tape applied to the inside of the clamp fingers that contact the barrel to alleviate finish wear. Because we have no control over the installation of this product, Nordic Components is not responsible for any resulting wear or damage. Do not apply anything to the clamp fingers that contact the magazine tube.

  • Standard Barrel Clamp, 12ga

    Price: $32.81

    The Nordic Components shotgun barrel clamp provides extra rigidity for your magazine extension.  Features 10-32 threaded hole for mounting Picatinny rails or other accessories.  Fits most shotguns when used with a Nordic Components MXT extension tube.

    Not compatible with:

    • Mossberg 590/590A1, 835, 935 shotguns (requires heavy-wall barrel clamp)
    • Benelli Nova/Supernova (requires heavy-wall barrel clamp)
    • Browning Auto-5, Remington Model 11, Savage 720/725, or any other shotguns with reciprocating barrels

    Designed for Nordic extension tubes (1.060" diameter) but may be compatible with other models.

    Note:  The shotgun barrel clamp makes contact with your barrel and may damage/wear the finish on your barrel with use. We recommend using masking tape applied to the inside of the clamp fingers that contact the barrel to alleviate finish wear. Because we have no control over the installation of this product, Nordic Components is not responsible for any resulting wear or damage. Do not apply anything to the clamp fingers that contact the magazine tube.

    Standard Barrel Clamp, 12ga

    The Nordic Components shotgun barrel clamp provides extra rigidity for your magazine extension.  Features 10-32 threaded hole for mounting Picatinny rails or other accessories.  Fits most shotguns when used with a Nordic Components MXT extension tube.

    Not compatible with:

    • Mossberg 590/590A1, 835, 935 shotguns (requires heavy-wall barrel clamp)
    • Benelli Nova/Supernova (requires heavy-wall barrel clamp)
    • Browning Auto-5, Remington Model 11, Savage 720/725, or any other shotguns with reciprocating barrels

    Designed for Nordic extension tubes (1.060" diameter) but may be compatible with other models.

    Note:  The shotgun barrel clamp makes contact with your barrel and may damage/wear the finish on your barrel with use. We recommend using masking tape applied to the inside of the clamp fingers that contact the barrel to alleviate finish wear. Because we have no control over the installation of this product, Nordic Components is not responsible for any resulting wear or damage. Do not apply anything to the clamp fingers that contact the magazine tube.

Shotgun - MXT Extension Nuts

See more

Shotgun - MXT Extension Tubes

  • Beretta 1301 Tactical MXT Extension Kit

    Rated 5.00 out of 5
    Price: $145.00

    Beretta 1301 extension kit in a single package for Tactical model.

    • Features MXT magazine extension designed exclusively for the 1301 Tactical
    • Beretta 1301 extension increases magazine capacity to 7 rounds (capacity determined with 2 3/4" shells and may vary with shells of differing length)
    • Barrel clamp kit includes 1301 Tactical-exclusive clamp, Picatinny rail, and QDA swivel attachment
    • Utilizes factory magazine spring (spare generic spring included)

     

    Beretta 1301 Tactical MXT Extension Kit

    Beretta 1301 extension kit in a single package for Tactical model.

    • Features MXT magazine extension designed exclusively for the 1301 Tactical
    • Beretta 1301 extension increases magazine capacity to 7 rounds (capacity determined with 2 3/4" shells and may vary with shells of differing length)
    • Barrel clamp kit includes 1301 Tactical-exclusive clamp, Picatinny rail, and QDA swivel attachment
    • Utilizes factory magazine spring (spare generic spring included)

     

  • Extension Tube Springs 12ga/20ga

    Rated 5.00 out of 5
    Price: $12.93$13.43

    Replacement spring for shotgun magazine extensions.

    • Spring has extra length to allow fitting to magazine
    • Ships coiled in package with instructions for determining length and cutting
    • Available in standard and heavy-duty strengths for 12ga, standard strength for 20ga

    Extension Tube Springs 12ga/20ga

    Replacement spring for shotgun magazine extensions.

    • Spring has extra length to allow fitting to magazine
    • Ships coiled in package with instructions for determining length and cutting
    • Available in standard and heavy-duty strengths for 12ga, standard strength for 20ga
  • MXT Extension Tube Coupler

    Price: $33.99

    The MXT Coupler allows you to add a second MXT extension tube to your existing extension.  Whether you're concerned about keeping your shotgun at a manageable length in safes and cases without having to completely disassemble your extension, or for those times when a single +9 tube just isn't quite enough, this coupler maximizes the modularity of your MXT extension assembly.

    Oh, and don't forget to order a new spring to accommodate that increased capacity.

    • Allows for combining multiple MXT extension tubes
    • Facilitates expanded magazine capacity while retaining modular overall length
    • Provides easy removal of additional magazine extension to accommodate use of standard length shotgun cases

    Attention Washington D.C. Residents: We will not ship any magazine tube extension or magazine extension tube component into Washington D.C. due to current regulations.

    MXT Extension Tube Coupler

    The MXT Coupler allows you to add a second MXT extension tube to your existing extension.  Whether you're concerned about keeping your shotgun at a manageable length in safes and cases without having to completely disassemble your extension, or for those times when a single +9 tube just isn't quite enough, this coupler maximizes the modularity of your MXT extension assembly.

    Oh, and don't forget to order a new spring to accommodate that increased capacity.

    • Allows for combining multiple MXT extension tubes
    • Facilitates expanded magazine capacity while retaining modular overall length
    • Provides easy removal of additional magazine extension to accommodate use of standard length shotgun cases

    Attention Washington D.C. Residents: We will not ship any magazine tube extension or magazine extension tube component into Washington D.C. due to current regulations.

  • MXT Extension, Tube Only. 12ga.

    Rated 5.00 out of 5
    Price: $27.99$34.99

    Nordic Components MXT magazine extension tube.

    • MXT extension tube for changing magazine extension length and capacity
    • Available in variety of lengths between +2 and +9 (shell capacity measured with 2 3/4" shells and may vary with shells of differing length)
    • Features relief groove to eliminate barrel clamp travel and ensure repeatable placement after disassembly
    • Relief groove is not centered and can be relocated by reversing the tube (thread pitch the same on both ends)
    • Includes ONLY MXT tube
    • May require purchase of new magazine spring if you are changing the capacity of your existing extension

    Attention Washington D.C. Residents: We will not ship any magazine tube extension or magazine extension tube component into Washington D.C. due to current regulations.

    MXT Extension, Tube Only. 12ga.

    Nordic Components MXT magazine extension tube.

    • MXT extension tube for changing magazine extension length and capacity
    • Available in variety of lengths between +2 and +9 (shell capacity measured with 2 3/4" shells and may vary with shells of differing length)
    • Features relief groove to eliminate barrel clamp travel and ensure repeatable placement after disassembly
    • Relief groove is not centered and can be relocated by reversing the tube (thread pitch the same on both ends)
    • Includes ONLY MXT tube
    • May require purchase of new magazine spring if you are changing the capacity of your existing extension

    Attention Washington D.C. Residents: We will not ship any magazine tube extension or magazine extension tube component into Washington D.C. due to current regulations.

  • MXT Shotgun Magazine Extension Tube Kit, 12ga.

    Rated 5.00 out of 5
    Price: $39.99$59.94

    THIS PRODUCT REQUIRES AN MXT EXTENSION TUBE NUT TO BE INSTALLED ON YOUR SHOTGUN — THIS TUBE KIT WILL NOT ATTACH WITHOUT THE NUT

    Visit this page for information to ensure you order a complete kit assembly.

    MXT Shotgun Magazine Extension Tube Kit, 12ga.

    THIS PRODUCT REQUIRES AN MXT EXTENSION TUBE NUT TO BE INSTALLED ON YOUR SHOTGUN — THIS TUBE KIT WILL NOT ATTACH WITHOUT THE NUT

    Visit this page for information to ensure you order a complete kit assembly.

  • Shotgun Extension Tube End Cap 12ga/20ga

    Price: $15.85

    Machined aluminum end cap for Nordic Components MXT shotgun magazine extensions.

    Shotgun Extension Tube End Cap 12ga/20ga

    Machined aluminum end cap for Nordic Components MXT shotgun magazine extensions.

Shotgun - Shotgun Accessories

Shotgun Accessories
  • Extension Tube Springs 12ga/20ga

    Rated 5.00 out of 5
    Price: $12.93$13.43

    Replacement spring for shotgun magazine extensions.

    • Spring has extra length to allow fitting to magazine
    • Ships coiled in package with instructions for determining length and cutting
    • Available in standard and heavy-duty strengths for 12ga, standard strength for 20ga

    Extension Tube Springs 12ga/20ga

    Replacement spring for shotgun magazine extensions.

    • Spring has extra length to allow fitting to magazine
    • Ships coiled in package with instructions for determining length and cutting
    • Available in standard and heavy-duty strengths for 12ga, standard strength for 20ga
  • Low-drag Shotgun Follower

    Low Drag Shotgun Follower 12ga/20ga

    Rated 4.00 out of 5
    Price: $15.85

    Nordic Components anodized aluminum low-drag shotgun follower

    • Improved design reduces shotgun follower binding or hangups within tube, particularly in transition area between factory magazine and extension
    • Anodized aluminum construction for durability and longevity
    • Red anodization increases shotgun follower visibility for additional safety while checking magazine for ammunition

    Note:  Any spring/follower retention features or devices within the factory magazine tube will need to be removed for function with the Nordic Components follower

    Low Drag Shotgun Follower 12ga/20ga

    Nordic Components anodized aluminum low-drag shotgun follower

    • Improved design reduces shotgun follower binding or hangups within tube, particularly in transition area between factory magazine and extension
    • Anodized aluminum construction for durability and longevity
    • Red anodization increases shotgun follower visibility for additional safety while checking magazine for ammunition

    Note:  Any spring/follower retention features or devices within the factory magazine tube will need to be removed for function with the Nordic Components follower

  • M4 1 piece 7 Round Replacement Tube

    Price: $74.95

    Length 18 1/8"
    Capacity 7+1
    Increases the capacity of Your M4 shotgun by two rounds. made from seamless chrome-moly steel tubing in a matte black color to match the finish of your weapon. Kit includes the tube and correct lenght spring: everything necessary to convert your M4 to 7+1 Capacity

    M4 1 piece 7 Round Replacement Tube

    Length 18 1/8"
    Capacity 7+1
    Increases the capacity of Your M4 shotgun by two rounds. made from seamless chrome-moly steel tubing in a matte black color to match the finish of your weapon. Kit includes the tube and correct lenght spring: everything necessary to convert your M4 to 7+1 Capacity

  • M4 2 Round Extension Tube

    Price: $74.95

    Increases the capacity of Your M4 shotgun by two rounds. The Tube is made from Carbon Steel, black oxide finished. Kit includes the tube and correct lenght spring: everything necessary to convert your M4 to 7+1 Capacity

    M4 2 Round Extension Tube

    Increases the capacity of Your M4 shotgun by two rounds. The Tube is made from Carbon Steel, black oxide finished. Kit includes the tube and correct lenght spring: everything necessary to convert your M4 to 7+1 Capacity

  • MatchSaverz Shotshell Holder

    Price: $24.95

    Keep it HOT with ONE MORE shot! MatchSaverz mount to the side of your shotgun and allow you to quickly slide one last round into the chamber for that all important last shot. This can literally shave seconds off your time. Made of a special plastic that allows the shotshell to slide easily, yet hold it securely. Available in Rocket Red, Blazin' Blue, White Lightning, or Tactical Black.

    MatchSaverz Shotshell Holder

    Keep it HOT with ONE MORE shot! MatchSaverz mount to the side of your shotgun and allow you to quickly slide one last round into the chamber for that all important last shot. This can literally shave seconds off your time. Made of a special plastic that allows the shotshell to slide easily, yet hold it securely. Available in Rocket Red, Blazin' Blue, White Lightning, or Tactical Black.

  • MXT Extension Tube Coupler

    Price: $33.99

    The MXT Coupler allows you to add a second MXT extension tube to your existing extension.  Whether you're concerned about keeping your shotgun at a manageable length in safes and cases without having to completely disassemble your extension, or for those times when a single +9 tube just isn't quite enough, this coupler maximizes the modularity of your MXT extension assembly.

    Oh, and don't forget to order a new spring to accommodate that increased capacity.

    • Allows for combining multiple MXT extension tubes
    • Facilitates expanded magazine capacity while retaining modular overall length
    • Provides easy removal of additional magazine extension to accommodate use of standard length shotgun cases

    Attention Washington D.C. Residents: We will not ship any magazine tube extension or magazine extension tube component into Washington D.C. due to current regulations.

    MXT Extension Tube Coupler

    The MXT Coupler allows you to add a second MXT extension tube to your existing extension.  Whether you're concerned about keeping your shotgun at a manageable length in safes and cases without having to completely disassemble your extension, or for those times when a single +9 tube just isn't quite enough, this coupler maximizes the modularity of your MXT extension assembly.

    Oh, and don't forget to order a new spring to accommodate that increased capacity.

    • Allows for combining multiple MXT extension tubes
    • Facilitates expanded magazine capacity while retaining modular overall length
    • Provides easy removal of additional magazine extension to accommodate use of standard length shotgun cases

    Attention Washington D.C. Residents: We will not ship any magazine tube extension or magazine extension tube component into Washington D.C. due to current regulations.

  • MXT Plug Cap-QDA

    Rated 5.00 out of 5
    Price: $33.99$37.01

    Extension cap for returning shotgun to factory capacity.

    • Attaches to MXT extension nut (not included)
    • Facilitates attaching a sling to the magazine cap
    • Available with QD Swivel Cup (push button QD swivel not included) or plain plug configuration
    • May result in +1 capacity gain over factory configuration depending on shotgun model

    NOTE: May require fabrication of a new magazine plug or modification of an existing magazine plug to restrict magazine to comply with Federal law regarding 2-round magazine capacity limit for hunting migratory waterfowl

    MXT Plug Cap-QDA

    Extension cap for returning shotgun to factory capacity.

    • Attaches to MXT extension nut (not included)
    • Facilitates attaching a sling to the magazine cap
    • Available with QD Swivel Cup (push button QD swivel not included) or plain plug configuration
    • May result in +1 capacity gain over factory configuration depending on shotgun model

    NOTE: May require fabrication of a new magazine plug or modification of an existing magazine plug to restrict magazine to comply with Federal law regarding 2-round magazine capacity limit for hunting migratory waterfowl

  • NC Shotgun Chamber Flag

    Price: $12.95

    Nordic Components empty chamber indicator flag.

    • Installs easily and quick to remove when ready to load
    • Provides highly visible indication that your shotgun is empty
    • Manufactured for Nordic Components by Plug'rUSA

    NC Shotgun Chamber Flag

    Nordic Components empty chamber indicator flag.

    • Installs easily and quick to remove when ready to load
    • Provides highly visible indication that your shotgun is empty
    • Manufactured for Nordic Components by Plug'rUSA
  • Shotgun Bolt Operating Handle

    Rated 5.00 out of 5
    Price: $31.75$36.95

    Enlarged bolt handle for most tactical/competition shotguns.

    • Provides increased surface for rapid manipulation of bolt
    • Simple installation with no gunsmithing required
    • Rounded design decreases likelihood of injury to hand or fingers

     

    Shotgun Bolt Operating Handle

    Enlarged bolt handle for most tactical/competition shotguns.

    • Provides increased surface for rapid manipulation of bolt
    • Simple installation with no gunsmithing required
    • Rounded design decreases likelihood of injury to hand or fingers

     

  • Speed Button for Autoloading Shotguns

    Price: $14.00

    Oversized bolt release button for most autoloading shotguns.  The oversize button provides a larger surface for manipulating the bolt release.

    • Fits most autoloaders with a bolt release on the side of the receiver
    • Requires drilling and tapping of the existing release button (tap not included)
    • Includes button and fastener

    Speed Button for Autoloading Shotguns

    Oversized bolt release button for most autoloading shotguns.  The oversize button provides a larger surface for manipulating the bolt release.

    • Fits most autoloaders with a bolt release on the side of the receiver
    • Requires drilling and tapping of the existing release button (tap not included)
    • Includes button and fastener

No products were found matching your selection.