Shotgun

Showing 33–40 of 40 results

View as:
  • Shotgun Bolt Operating Handle

    Rated 5.00 out of 5
    Price: $31.75$36.95

    Enlarged bolt handle for most tactical/competition shotguns.

    • Provides increased surface for rapid manipulation of bolt
    • Simple installation with no gunsmithing required
    • Rounded design decreases likelihood of injury to hand or fingers

     

    Shotgun Bolt Operating Handle

    Enlarged bolt handle for most tactical/competition shotguns.

    • Provides increased surface for rapid manipulation of bolt
    • Simple installation with no gunsmithing required
    • Rounded design decreases likelihood of injury to hand or fingers

     

  • Shotgun Extension Tube End Cap 12ga/20ga

    Price: $15.85

    Machined aluminum end cap for Nordic Components MXT shotgun magazine extensions.

    Shotgun Extension Tube End Cap 12ga/20ga

    Machined aluminum end cap for Nordic Components MXT shotgun magazine extensions.

  • Shotgun Extension Tube Kit, 20ga.

    Price: $75.60

    Nordic Components shotgun magazine extension tube kit for increasing magazine capacity.  Used in conjunction with the 20 gauge extension tube nut, this tube kit will add the listed number of rounds to your existing magazine capacity.  All capacities are measured using 2.75" star-crimped shells; for use with 3" or 3.5", increase your selection by one or two rounds.

    Kits ship with extension tube, tube cap, and full-length spring (+1 tubes have an integral cap and will not include a separate cap).   To determine the length of the extension in relation to your shotgun, reference the measurement diagram and dimension table below.  Note that the tube nut will add between .750" and 1.000" depending on the shotgun model.

    THIS PRODUCT REQUIRES AN 20GA EXTENSION TUBE NUT TO BE INSTALLED ON YOUR SHOTGUN -- THIS TUBE KIT WILL NOT ATTACH WITHOUT THE NUT

     

    Barrel_Ext_Measurement_Illustration

    Note:  May require modification of shotgun for installation and/or proper function.  Any spring/follower retention devices will have to be removed to allow extension to function.

    Attention Washington, D.C. Residents: We will not ship any magazine tube extension or magazine extension tube component into, Washington D.C. due to current regulations.

    Shotgun Extension Tube Kit, 20ga.

    Nordic Components shotgun magazine extension tube kit for increasing magazine capacity.  Used in conjunction with the 20 gauge extension tube nut, this tube kit will add the listed number of rounds to your existing magazine capacity.  All capacities are measured using 2.75" star-crimped shells; for use with 3" or 3.5", increase your selection by one or two rounds.

    Kits ship with extension tube, tube cap, and full-length spring (+1 tubes have an integral cap and will not include a separate cap).   To determine the length of the extension in relation to your shotgun, reference the measurement diagram and dimension table below.  Note that the tube nut will add between .750" and 1.000" depending on the shotgun model.

    THIS PRODUCT REQUIRES AN 20GA EXTENSION TUBE NUT TO BE INSTALLED ON YOUR SHOTGUN -- THIS TUBE KIT WILL NOT ATTACH WITHOUT THE NUT

     

    Barrel_Ext_Measurement_Illustration

    Note:  May require modification of shotgun for installation and/or proper function.  Any spring/follower retention devices will have to be removed to allow extension to function.

    Attention Washington, D.C. Residents: We will not ship any magazine tube extension or magazine extension tube component into, Washington D.C. due to current regulations.

  • Shotgun Extension, Tube Only, 20ga.

    Price: $33.20$46.79

    Nordic Components MXT extension tube for 20 gauge shotguns.

    • Available in variety of lengths between +4 and +7 (shell capacity measured with 2 3/4″ shells and may vary with shells of differing length)
    • Includes ONLY MXT tube
    • May require purchase of new magazine spring if you are changing the capacity of your existing extension

    Barrel_Ext_Measurement_Illustration

    *Some shotgun magazine tubes may require minor modification. Call us if you are having problems fitting our extension tubes to your shotgun.

    Attention Washington D.C. Residents: We will not ship any magazine tube extension or magazine extension tube component into Washington D.C. due to current regulations.

    Shotgun Extension, Tube Only, 20ga.

    Nordic Components MXT extension tube for 20 gauge shotguns.

    • Available in variety of lengths between +4 and +7 (shell capacity measured with 2 3/4″ shells and may vary with shells of differing length)
    • Includes ONLY MXT tube
    • May require purchase of new magazine spring if you are changing the capacity of your existing extension

    Barrel_Ext_Measurement_Illustration

    *Some shotgun magazine tubes may require minor modification. Call us if you are having problems fitting our extension tubes to your shotgun.

    Attention Washington D.C. Residents: We will not ship any magazine tube extension or magazine extension tube component into Washington D.C. due to current regulations.

  • Shotgun QD mount for Barrel Clamp

    Shotgun QD Mount for Shotgun Barrel Clamps

    Price: $21.02

    Shotgun QD mount plate for attaching to Nordic Components shotgun barrel clamp.

    • Allows mounting quick-detach (QD) sling swivel directly to barrel clamp without tactical rail
    • Provides forward shotgun QD mount location
    • Compatible with all Nordic Components barrel clamps
    • Does not obstruct access to clamp assembly screws
    • Includes one #10-32 screw for mounting (does not include sling swivel)

     

    Shotgun QD Mount for Shotgun Barrel Clamps

    Shotgun QD mount plate for attaching to Nordic Components shotgun barrel clamp.

    • Allows mounting quick-detach (QD) sling swivel directly to barrel clamp without tactical rail
    • Provides forward shotgun QD mount location
    • Compatible with all Nordic Components barrel clamps
    • Does not obstruct access to clamp assembly screws
    • Includes one #10-32 screw for mounting (does not include sling swivel)

     

  • Speed Button for Autoloading Shotguns

    Price: $14.00

    Oversized bolt release button for most autoloading shotguns.  The oversize button provides a larger surface for manipulating the bolt release.

    • Fits most autoloaders with a bolt release on the side of the receiver
    • Requires drilling and tapping of the existing release button (tap not included)
    • Includes button and fastener

    Speed Button for Autoloading Shotguns

    Oversized bolt release button for most autoloading shotguns.  The oversize button provides a larger surface for manipulating the bolt release.

    • Fits most autoloaders with a bolt release on the side of the receiver
    • Requires drilling and tapping of the existing release button (tap not included)
    • Includes button and fastener
  • Standard Barrel Clamp with Picatinny Rail, 12ga.

    Price: $45.66

    The Nordic Components shotgun barrel clamp provides extra rigidity for your magazine extension.  Includes Picatinny rail and mounting screw.  Fits most shotguns when used with a Nordic Components Extension.

    Not compatible with:

    • Mossberg 590/590A1, 835, 935 shotguns (requires heavy-wall barrel clamp)
    • Benelli Nova/Supernova (requires heavy-wall barrel clamp)
    • Browning Auto-5, Remington Model 11, Savage 720/725, or any other shotguns with reciprocating barrels

    Designed for Nordic extension tubes (1.060" diameter) but may be compatible with other models.

    Note:  The shotgun barrel clamp makes contact with your barrel and may damage/wear the finish on your barrel with use. We recommend using masking tape applied to the inside of the clamp fingers that contact the barrel to alleviate finish wear. Because we have no control over the installation of this product, Nordic Components is not responsible for any resulting wear or damage. Do not apply anything to the clamp fingers that contact the magazine tube.

    Standard Barrel Clamp with Picatinny Rail, 12ga.

    The Nordic Components shotgun barrel clamp provides extra rigidity for your magazine extension.  Includes Picatinny rail and mounting screw.  Fits most shotguns when used with a Nordic Components Extension.

    Not compatible with:

    • Mossberg 590/590A1, 835, 935 shotguns (requires heavy-wall barrel clamp)
    • Benelli Nova/Supernova (requires heavy-wall barrel clamp)
    • Browning Auto-5, Remington Model 11, Savage 720/725, or any other shotguns with reciprocating barrels

    Designed for Nordic extension tubes (1.060" diameter) but may be compatible with other models.

    Note:  The shotgun barrel clamp makes contact with your barrel and may damage/wear the finish on your barrel with use. We recommend using masking tape applied to the inside of the clamp fingers that contact the barrel to alleviate finish wear. Because we have no control over the installation of this product, Nordic Components is not responsible for any resulting wear or damage. Do not apply anything to the clamp fingers that contact the magazine tube.

  • Standard Barrel Clamp, 12ga

    Price: $32.81

    The Nordic Components shotgun barrel clamp provides extra rigidity for your magazine extension.  Features 10-32 threaded hole for mounting Picatinny rails or other accessories.  Fits most shotguns when used with a Nordic Components MXT extension tube.

    Not compatible with:

    • Mossberg 590/590A1, 835, 935 shotguns (requires heavy-wall barrel clamp)
    • Benelli Nova/Supernova (requires heavy-wall barrel clamp)
    • Browning Auto-5, Remington Model 11, Savage 720/725, or any other shotguns with reciprocating barrels

    Designed for Nordic extension tubes (1.060" diameter) but may be compatible with other models.

    Note:  The shotgun barrel clamp makes contact with your barrel and may damage/wear the finish on your barrel with use. We recommend using masking tape applied to the inside of the clamp fingers that contact the barrel to alleviate finish wear. Because we have no control over the installation of this product, Nordic Components is not responsible for any resulting wear or damage. Do not apply anything to the clamp fingers that contact the magazine tube.

    Standard Barrel Clamp, 12ga

    The Nordic Components shotgun barrel clamp provides extra rigidity for your magazine extension.  Features 10-32 threaded hole for mounting Picatinny rails or other accessories.  Fits most shotguns when used with a Nordic Components MXT extension tube.

    Not compatible with:

    • Mossberg 590/590A1, 835, 935 shotguns (requires heavy-wall barrel clamp)
    • Benelli Nova/Supernova (requires heavy-wall barrel clamp)
    • Browning Auto-5, Remington Model 11, Savage 720/725, or any other shotguns with reciprocating barrels

    Designed for Nordic extension tubes (1.060" diameter) but may be compatible with other models.

    Note:  The shotgun barrel clamp makes contact with your barrel and may damage/wear the finish on your barrel with use. We recommend using masking tape applied to the inside of the clamp fingers that contact the barrel to alleviate finish wear. Because we have no control over the installation of this product, Nordic Components is not responsible for any resulting wear or damage. Do not apply anything to the clamp fingers that contact the magazine tube.