AR-10 Components

Showing 17–22 of 22 results

View as:
  • NC10 Receiver Sets

    Price: $500.00$550.00

    The same seamlessly mated NC10 upper and handguard used in our complete NC10 rifles, now available for use on your next build.

    • Upper precision machined from 7075 aluminum billet to match the contours of the NC308 handguard
    • Upper and handguard finished with black anodizing
    • Includes barrel nut and handguard attachment hardware (including indexing pin)
    • M-Lok compatible handguard
    • Available with 15" (XL) and 17" (XXL) handguards

    NC10 Receiver Sets

    The same seamlessly mated NC10 upper and handguard used in our complete NC10 rifles, now available for use on your next build.

    • Upper precision machined from 7075 aluminum billet to match the contours of the NC308 handguard
    • Upper and handguard finished with black anodizing
    • Includes barrel nut and handguard attachment hardware (including indexing pin)
    • M-Lok compatible handguard
    • Available with 15" (XL) and 17" (XXL) handguards
  • NCT3 Compensators

    Rated 4.00 out of 5
    Price: $68.96$86.43

    The all-new NCT3 compensator, designed to eliminate recoil and muzzle climb while being tailored to your exact requirements.  Available for .223, 9mm or .308 bore diameters.

    • Two chambers divert blast to the sides, reducing in-line recoil, while three vertical high-pressure ports prevent muzzle climb (.223/.308)
    • Two horizontal ports on the .223/.308 are threaded to allow set screw installation, allowing the shooter to optimize the compensator for right- or left-handed shooting (one screw included)
    • Black nitride finished for durability and corrosion resistance
    • .223 and 9mm threaded 1/2x28, .308 threaded 5/8x24
    • Includes crush washer

    NCT3 Compensators

    The all-new NCT3 compensator, designed to eliminate recoil and muzzle climb while being tailored to your exact requirements.  Available for .223, 9mm or .308 bore diameters.

    • Two chambers divert blast to the sides, reducing in-line recoil, while three vertical high-pressure ports prevent muzzle climb (.223/.308)
    • Two horizontal ports on the .223/.308 are threaded to allow set screw installation, allowing the shooter to optimize the compensator for right- or left-handed shooting (one screw included)
    • Black nitride finished for durability and corrosion resistance
    • .223 and 9mm threaded 1/2x28, .308 threaded 5/8x24
    • Includes crush washer
  • NCT3 Flash Hiders

    Price: $68.96$79.65

    Nordic's standard closed-face three-prong flash suppressor, as used on the NC15/NC10/NCPCC rifles.

     

    • Machined from 4140 pre-hardened steel
    • Black nitride finished for corrosion resistance and durability
    • Closed face to eliminate prong ring
    • .223 and 9mm flash hider threaded for 1/2-28 barrels
    • .308 flash hider threaded for 5/8-24 barrels
    • Includes crush washer

    NCT3 Flash Hiders

    Nordic's standard closed-face three-prong flash suppressor, as used on the NC15/NC10/NCPCC rifles.

     

    • Machined from 4140 pre-hardened steel
    • Black nitride finished for corrosion resistance and durability
    • Closed face to eliminate prong ring
    • .223 and 9mm flash hider threaded for 1/2-28 barrels
    • .308 flash hider threaded for 5/8-24 barrels
    • Includes crush washer
  • Nordic Low-Profile Gas Block

    Price: $69.98

    Nordic Components low-profile non-adjustable .750 gas block.

     

    • Machined with extreme precision from 416 stainless steel
    • Triple-fastener clamp design ensures optimally tight fit on gas block journal and does not require dimpled barrel
    • Black nitride finished for long-lasting durability
    • Minimalist dimensions allow use with slim-profile handguards
    • Features machined flat and spot-drilled locator to facilitate easy pinning of gas block (pin not included)
    • Designed to fit all barrels with .750" diameter gas block journal

    Nordic Low-Profile Gas Block

    Nordic Components low-profile non-adjustable .750 gas block.

     

    • Machined with extreme precision from 416 stainless steel
    • Triple-fastener clamp design ensures optimally tight fit on gas block journal and does not require dimpled barrel
    • Black nitride finished for long-lasting durability
    • Minimalist dimensions allow use with slim-profile handguards
    • Features machined flat and spot-drilled locator to facilitate easy pinning of gas block (pin not included)
    • Designed to fit all barrels with .750" diameter gas block journal
  • Picatinny Rails

    Price: $19.91$39.98

    Picatinny rails for use on our NC1, NC2, and Small Diameter handguards.

    • Multiple lengths to accommodate various handguard sizes
    • Suitable for use as top rail for rail-mounted sights/optics
    • Includes all attachment screws

    Picatinny Rails

    Picatinny rails for use on our NC1, NC2, and Small Diameter handguards.

    • Multiple lengths to accommodate various handguard sizes
    • Suitable for use as top rail for rail-mounted sights/optics
    • Includes all attachment screws
  • QDA Plate for Rifle Handguards

    Price: $19.91

    QDA plate for 2" diameter handguards.

    • Mounting point for quick-detach push button-style sling swivels
    • Designed for Nordic Components NC1 and NC2 handguards
    • Compatible with any 2" diameter handguard with #10-32 tapped holes
    • Includes only attachment plate and #10-32 x 1/2" screw (no swivel included)

     

     

     

    QDA Plate for Rifle Handguards

    QDA plate for 2" diameter handguards.

    • Mounting point for quick-detach push button-style sling swivels
    • Designed for Nordic Components NC1 and NC2 handguards
    • Compatible with any 2" diameter handguard with #10-32 tapped holes
    • Includes only attachment plate and #10-32 x 1/2" screw (no swivel included)