Clearance
Individual prices are shown for each product variation-NOT ALL ITEMS ARE DISCOUNTED
Showing all 7 results
-
Sale!
.300 Blackout Barrels
Price: $112.50 – $134.50- 1-8″ twist rate
- Machined from 416 stainless match-grade blank
- M4 feed ramps
- Pistol-length (10.5″) or carbine-length (16″) gas port
- Cryogenically treated
- Black Teflon finish
- 5/8x24" threaded muzzle
.300 Blackout Barrels
- 1-8″ twist rate
- Machined from 416 stainless match-grade blank
- M4 feed ramps
- Pistol-length (10.5″) or carbine-length (16″) gas port
- Cryogenically treated
- Black Teflon finish
- 5/8x24" threaded muzzle
-
Low Drag Shotgun Follower 12ga/20ga
Price: $15.85Nordic Components anodized aluminum low-drag shotgun follower
- Improved design reduces shotgun follower binding or hangups within tube, particularly in transition area between factory magazine and extension
- Anodized aluminum construction for durability and longevity
- Red anodization increases shotgun follower visibility for additional safety while checking magazine for ammunition
Note: Any spring/follower retention features or devices within the factory magazine tube will need to be removed for function with the Nordic Components follower. Includes most Remington shotguns, Winchester SXP, and others.
Low Drag Shotgun Follower 12ga/20ga
Nordic Components anodized aluminum low-drag shotgun follower
- Improved design reduces shotgun follower binding or hangups within tube, particularly in transition area between factory magazine and extension
- Anodized aluminum construction for durability and longevity
- Red anodization increases shotgun follower visibility for additional safety while checking magazine for ammunition
Note: Any spring/follower retention features or devices within the factory magazine tube will need to be removed for function with the Nordic Components follower. Includes most Remington shotguns, Winchester SXP, and others.
-
Sale!
M-Lok Accessories
Price: $9.47 – $29.93Nordic Component M-Lok accessories were designed for use with all M-LOK compatible handguards. M-LOK aluminum rail/QD sections allow the attachment of various mounted accessories. All hardware necessary for attachment directly to M-LOK slots is included
M-Lok Accessories
Nordic Component M-Lok accessories were designed for use with all M-LOK compatible handguards. M-LOK aluminum rail/QD sections allow the attachment of various mounted accessories. All hardware necessary for attachment directly to M-LOK slots is included
-
NC15 Extruded Upper Receiver
Price: $79.89Nordic Components AR15-pattern upper receiver.
- Slick-side upper receiver eliminates dust cover and forward assist for reduced weight and cleaner lines
- Compatible with mil-spec bolt carrier groups, charging handles, and handguards
- Flat-top Picatinny rail accommodates mounting optics or other accessories
- 7029-T6 aluminum
- 10 oz. weight
NC15 Extruded Upper Receiver
Nordic Components AR15-pattern upper receiver.
- Slick-side upper receiver eliminates dust cover and forward assist for reduced weight and cleaner lines
- Compatible with mil-spec bolt carrier groups, charging handles, and handguards
- Flat-top Picatinny rail accommodates mounting optics or other accessories
- 7029-T6 aluminum
- 10 oz. weight
-
Shotgun Extension Tube End Cap 12ga/20ga
Price: $15.85Machined aluminum end cap for Nordic Components MXT shotgun magazine extensions.
Shotgun Extension Tube End Cap 12ga/20ga
Machined aluminum end cap for Nordic Components MXT shotgun magazine extensions.
-
Shotgun Extension Tube Kit, 20ga.
Price: $75.60Nordic Components shotgun magazine extension tube kit for increasing magazine capacity. Used in conjunction with the 20 gauge extension tube nut, this tube kit will add the listed number of rounds to your existing magazine capacity. All capacities are measured using 2.75" star-crimped shells; for use with 3" or 3.5", increase your selection by one or two rounds.
Kits ship with extension tube, tube cap, and full-length spring (+1 tubes have an integral cap and will not include a separate cap). To determine the length of the extension in relation to your shotgun, reference the measurement diagram and dimension table below. Note that the tube nut will add between .750" and 1.000" depending on the shotgun model.
THIS PRODUCT REQUIRES AN 20GA EXTENSION TUBE NUT TO BE INSTALLED ON YOUR SHOTGUN -- THIS TUBE KIT WILL NOT ATTACH WITHOUT THE NUT
Note: May require modification of shotgun for installation and/or proper function. Any spring/follower retention devices will have to be removed to allow extension to function.
Attention Washington, D.C. Residents: We will not ship any magazine tube extension or magazine extension tube component into, Washington D.C. due to current regulations.
Shotgun Extension Tube Kit, 20ga.
Nordic Components shotgun magazine extension tube kit for increasing magazine capacity. Used in conjunction with the 20 gauge extension tube nut, this tube kit will add the listed number of rounds to your existing magazine capacity. All capacities are measured using 2.75" star-crimped shells; for use with 3" or 3.5", increase your selection by one or two rounds.
Kits ship with extension tube, tube cap, and full-length spring (+1 tubes have an integral cap and will not include a separate cap). To determine the length of the extension in relation to your shotgun, reference the measurement diagram and dimension table below. Note that the tube nut will add between .750" and 1.000" depending on the shotgun model.
THIS PRODUCT REQUIRES AN 20GA EXTENSION TUBE NUT TO BE INSTALLED ON YOUR SHOTGUN -- THIS TUBE KIT WILL NOT ATTACH WITHOUT THE NUT
Note: May require modification of shotgun for installation and/or proper function. Any spring/follower retention devices will have to be removed to allow extension to function.
Attention Washington, D.C. Residents: We will not ship any magazine tube extension or magazine extension tube component into, Washington D.C. due to current regulations.
-
Sale!
Shotgun Extension, Tube Only, 20ga.
Price: $16.60Nordic Components MXT extension tube for 20 gauge shotguns.
- Available in variety of lengths between +4 and +7 (shell capacity measured with 2 3/4″ shells and may vary with shells of differing length)
- Includes ONLY MXT tube
- May require purchase of new magazine spring if you are changing the capacity of your existing extension
*Some shotgun magazine tubes may require minor modification. Call us if you are having problems fitting our extension tubes to your shotgun.
Attention Washington D.C. Residents: We will not ship any magazine tube extension or magazine extension tube component into Washington D.C. due to current regulations.
Shotgun Extension, Tube Only, 20ga.
Nordic Components MXT extension tube for 20 gauge shotguns.
- Available in variety of lengths between +4 and +7 (shell capacity measured with 2 3/4″ shells and may vary with shells of differing length)
- Includes ONLY MXT tube
- May require purchase of new magazine spring if you are changing the capacity of your existing extension
*Some shotgun magazine tubes may require minor modification. Call us if you are having problems fitting our extension tubes to your shotgun.
Attention Washington D.C. Residents: We will not ship any magazine tube extension or magazine extension tube component into Washington D.C. due to current regulations.
