AR-10 Components

Showing 1–24 of 26 results

View as:
  • 16in223bbl

    .308 Winchester Barrels

    Price: $315.00$350.00
    • 1-10″ twist rate
    • Machined from 416 stainless match-grade blank
    • Mid-length (16″ lightweight) or rifle-length (16" heavy barrel, 18", 20") gas port
    • Cryogenically treated
    • Black Teflon finish
    • 5/8"x24 threaded muzzle

    16" lightweight barrel pictured

    .308 Winchester Barrels

    • 1-10″ twist rate
    • Machined from 416 stainless match-grade blank
    • Mid-length (16″ lightweight) or rifle-length (16" heavy barrel, 18", 20") gas port
    • Cryogenically treated
    • Black Teflon finish
    • 5/8"x24 threaded muzzle

    16" lightweight barrel pictured

  • ar10charginghandle

    AR-10 Charging Handle

    Price: $28.95

    The same quality and precision of our AR-15 charging handles in an up-scaled version for your .308, 6.5 Creedmoor, or other AR-10 platform rifle.

    • Black anodized finish
    • Standard release latch

    AR-10 Charging Handle

    The same quality and precision of our AR-15 charging handles in an up-scaled version for your .308, 6.5 Creedmoor, or other AR-10 platform rifle.

    • Black anodized finish
    • Standard release latch
  • 7 ladder rail cover-black

    Ergo 7-Slot Ladder LowPro Rail Cover

    Price: $3.95

    ERGO low-profile rail covers for Picatinny rails.

    • Protects rail sections from damage
    • Covers sharp rail edges to minimize injury or damage to gear
    • Santoprene material provides increased grip
    • Easily cut for fitting to rail sections

    Ergo 7-Slot Ladder LowPro Rail Cover

    ERGO low-profile rail covers for Picatinny rails.

    • Protects rail sections from damage
    • Covers sharp rail edges to minimize injury or damage to gear
    • Santoprene material provides increased grip
    • Easily cut for fitting to rail sections
  • 4000-bk_zoom_2_

    Ergo Grip AR15/M16 Original Suregrip

    Price: $19.45

    Original ERGO Grip® SureGrip fits all AR10/AR15 pattern rifles.

    • Ergonomically correct finger grooves provide enhanced grip and comfort
    • Integral rear upper extension supports the web of your hand
    • Superior textured finishes minimize slippage, even while wearing gloves
    • Virtually impervious to oils and solvents

    Ergo Grip AR15/M16 Original Suregrip

    Original ERGO Grip® SureGrip fits all AR10/AR15 pattern rifles.

    • Ergonomically correct finger grooves provide enhanced grip and comfort
    • Integral rear upper extension supports the web of your hand
    • Superior textured finishes minimize slippage, even while wearing gloves
    • Virtually impervious to oils and solvents
  • AR-GT-2

    Gas Tube for AR10/AR15, Mid-length

    Price: $13.95

    For use with our Lilja and Wilson mid-length gas system barrels

    Gas Tube for AR10/AR15, Mid-length

    For use with our Lilja and Wilson mid-length gas system barrels

  • AR-GT-2

    Gas Tube for AR10/AR15, Rifle-length

    Price: $13.95

    For use with any Rifle-length gas system barrels.

    Gas Tube for AR10/AR15, Rifle-length

    For use with any Rifle-length gas system barrels.

  • HTP_24_Burst_0

    Hiperfire HIPERTOUCH 24

    Price: $175.75

    The HIPERTOUCH® 24 fire-control drop-in is a high performance service rifle upgrade that installs in AR-15 and AR-10 type rifles.

    • Service rifle-style upgraded trigger provides enhanced pull characteristics while retaining drop safety (ANSI/SAAMI and ITOP drop force compliant)
    • Maintains mil-spec travel length with smoother pull
    • Uses stock AR-pattern trigger and semi-automatic disconnector springs with proprietary trigger, hammer, and disconnector components
    • Proprietary toggle-over-center spring system allows for lighter trigger pull without compromising hammer strike force
    • Curved trigger bow replicates traditional AR trigger feel
    • Trigger pull weight easily adjusted by shooter between 2-4 lbs
    • Installs without removal of the safety selector or modification to lower receiver

    Hiperfire HIPERTOUCH 24

    The HIPERTOUCH® 24 fire-control drop-in is a high performance service rifle upgrade that installs in AR-15 and AR-10 type rifles.

    • Service rifle-style upgraded trigger provides enhanced pull characteristics while retaining drop safety (ANSI/SAAMI and ITOP drop force compliant)
    • Maintains mil-spec travel length with smoother pull
    • Uses stock AR-pattern trigger and semi-automatic disconnector springs with proprietary trigger, hammer, and disconnector components
    • Proprietary toggle-over-center spring system allows for lighter trigger pull without compromising hammer strike force
    • Curved trigger bow replicates traditional AR trigger feel
    • Trigger pull weight easily adjusted by shooter between 2-4 lbs
    • Installs without removal of the safety selector or modification to lower receiver
  • HTP_243G_Burst_0

    Hiperfire HIPERTOUCH 24 3G Competition

    Price: $213.75

    The HIPERTOUCH® 24 3Gun (24 3G) curved bow competition trigger.

    Hiperfire HIPERTOUCH 24 3G Competition

    The HIPERTOUCH® 24 3Gun (24 3G) curved bow competition trigger.

  • HTP_24C_Burst_0

    Hiperfire HIPERTOUCH 24Competition

    Price: $223.25

    The HIPERTOUCH® 24C is Hiperfire's competition version of fire-control drop-ins for installation in AR-15® and AR-10® type rifles.

    • Short travel and reset facilitate high speed shooting without sacrificing accuracy
    • Flat bow trigger compatible with included HIPERSHOE™ adjustable finger pad allows for fast and repeatable finger location
    • Uses stock AR-pattern trigger and semi-automatic disconnector springs with proprietary trigger, hammer, and disconnector components
    • Proprietary toggle-over-center spring system allows for lighter trigger pull without compromising hammer strike force
    • Trigger pull weight easily adjusted by shooter between 2-4lbs with 15 distinct variations
    • Installs without removal of the safety selector or modification to lower receiver

    Hiperfire HIPERTOUCH 24Competition

    The HIPERTOUCH® 24C is Hiperfire's competition version of fire-control drop-ins for installation in AR-15® and AR-10® type rifles.

    • Short travel and reset facilitate high speed shooting without sacrificing accuracy
    • Flat bow trigger compatible with included HIPERSHOE™ adjustable finger pad allows for fast and repeatable finger location
    • Uses stock AR-pattern trigger and semi-automatic disconnector springs with proprietary trigger, hammer, and disconnector components
    • Proprietary toggle-over-center spring system allows for lighter trigger pull without compromising hammer strike force
    • Trigger pull weight easily adjusted by shooter between 2-4lbs with 15 distinct variations
    • Installs without removal of the safety selector or modification to lower receiver
  • HTP_24E_Burst_0

    Hiperfire HIPERTOUCH 24Elite

    Price: $204.25

    The HIPERTOUCH® 24E is Hiperfire's elite version of fire-control drop-ins for installation in AR-15 and AR-10 type rifles.

    • Improved weight and pull geometry ideal for marksmen and hunters
    • Uses stock AR-pattern trigger and semi-automatic disconnector springs with proprietary trigger, hammer, and disconnector components
    • Proprietary toggle-over-center spring system allows for lighter and smoother trigger pull without compromising hammer strike force
    • Curved trigger bow replicates traditional AR trigger feel
    • Trigger pull weight easily adjusted by shooter between 2-4 lbs
    • Installs without removal of the safety selector or modification to lower receiver

    Hiperfire HIPERTOUCH 24Elite

    The HIPERTOUCH® 24E is Hiperfire's elite version of fire-control drop-ins for installation in AR-15 and AR-10 type rifles.

    • Improved weight and pull geometry ideal for marksmen and hunters
    • Uses stock AR-pattern trigger and semi-automatic disconnector springs with proprietary trigger, hammer, and disconnector components
    • Proprietary toggle-over-center spring system allows for lighter and smoother trigger pull without compromising hammer strike force
    • Curved trigger bow replicates traditional AR trigger feel
    • Trigger pull weight easily adjusted by shooter between 2-4 lbs
    • Installs without removal of the safety selector or modification to lower receiver
  • JPFC-SA(bothlevers1)

    JP Adjustable/Reversible Selector, Ambidexterous

    Price: $66.45

    JP adjustable safety, reversible including extra low profile ambi lever for M-15 receiver can be used to eliminate the safety fitting process for the JPFC and FCP kits and provide perfect safety fit for any other aftermarket trigger system.

    JP Adjustable/Reversible Selector, Ambidexterous

    JP adjustable safety, reversible including extra low profile ambi lever for M-15 receiver can be used to eliminate the safety fitting process for the JPFC and FCP kits and provide perfect safety fit for any other aftermarket trigger system.

  • mlokcompilation2

    M-Lok Accessories

    Price: $16.95$29.95

    Nordic Component M-Lok accessories were designed for use with all M-LOK compatible handguards. M-LOK aluminum rail/QD sections allow the attachment of various mounted accessories. All hardware necessary for attachment directly to M-LOK slots is included

    M-Lok Accessories

    Nordic Component M-Lok accessories were designed for use with all M-LOK compatible handguards. M-LOK aluminum rail/QD sections allow the attachment of various mounted accessories. All hardware necessary for attachment directly to M-LOK slots is included

  • ar15buffertube

    NC Mil-Spec Carbine Buffer Tube

    Price: $30.00

    Mil-spec 6-position buffer tube manufactured from 7075 aluminum with black anodized finish.

    Tube only; endplate and castle nut not included

    NC Mil-Spec Carbine Buffer Tube

    Mil-spec 6-position buffer tube manufactured from 7075 aluminum with black anodized finish.

    Tube only; endplate and castle nut not included

  • chamberflag

    NC Rifle Chamber Flag

    Price: $12.95

    Nordic Components logo chamber flag

    NC Rifle Chamber Flag

    Nordic Components logo chamber flag

  • nc10lower1

    NC10 Lower Receiver

    Price: $225.00

    The same lower receiver on which the NC10 rifle is built, now available as a stripped receiver for the foundation of your next build.

    • Machined from a 7075 aluminum forging for maximum strength and economy
    • Features enhanced magwell machining to stand out from the crowd
    • Integral trigger guard provides cleaner lines while reducing additional parts
    • Accepts all standard AR10 components and accessories
    • Includes proprietary pivot pin
    • Black anodized finish

    All firearms must be shipped to a licensed FFL.  Please e-mail a copy of the receiving FFL to sales@nordiccomp.com upon ordering.

    NC10 Lower Receiver

    The same lower receiver on which the NC10 rifle is built, now available as a stripped receiver for the foundation of your next build.

    • Machined from a 7075 aluminum forging for maximum strength and economy
    • Features enhanced magwell machining to stand out from the crowd
    • Integral trigger guard provides cleaner lines while reducing additional parts
    • Accepts all standard AR10 components and accessories
    • Includes proprietary pivot pin
    • Black anodized finish

    All firearms must be shipped to a licensed FFL.  Please e-mail a copy of the receiving FFL to sales@nordiccomp.com upon ordering.

  • nc10-2piece2

    NC10 Receiver Sets

    Price: $500.00$550.00

    The same seamlessly mated NC10 upper and handguard used in our complete NC10 rifles, now available for use on your next build.

    • Upper precision machined from 7075 aluminum billet to match the contours of the NC308 handguard
    • Upper and handguard finished with black anodizing
    • Includes barrel nut and handguard attachment hardware (including indexing pin)
    • M-Lok compatible handguard
    • Available with 15" (XL) and 17" (XXL) handguards

    NC10 Receiver Sets

    The same seamlessly mated NC10 upper and handguard used in our complete NC10 rifles, now available for use on your next build.

    • Upper precision machined from 7075 aluminum billet to match the contours of the NC308 handguard
    • Upper and handguard finished with black anodizing
    • Includes barrel nut and handguard attachment hardware (including indexing pin)
    • M-Lok compatible handguard
    • Available with 15" (XL) and 17" (XXL) handguards
  • NCcomp

    NCT3 Compensators

    Price: $89.00

    The all-new NCT3 compensator, designed to eliminate recoil and muzzle climb while being tailored to your exact requirements.  Available for .223 or .308 bore diameters.

    • Two chambers divert blast to the sides, reducing in-line recoil, while three vertical high-pressure ports prevent muzzle climb
    • Two horizontal ports are threaded to allow set screw installation, allowing the shooter to optimize the compensator for right- or left-handed shooting (one screw included)
    • Black nitride finished for durability and corrosion resistance
    • .223 threaded 1/2x28, .308 threaded 5/8x24
    • Includes crush washer

    NCT3 Compensators

    The all-new NCT3 compensator, designed to eliminate recoil and muzzle climb while being tailored to your exact requirements.  Available for .223 or .308 bore diameters.

    • Two chambers divert blast to the sides, reducing in-line recoil, while three vertical high-pressure ports prevent muzzle climb
    • Two horizontal ports are threaded to allow set screw installation, allowing the shooter to optimize the compensator for right- or left-handed shooting (one screw included)
    • Black nitride finished for durability and corrosion resistance
    • .223 threaded 1/2x28, .308 threaded 5/8x24
    • Includes crush washer
  • flashhider

    NCT3 Flash Hiders

    Price: $79.00

    Nordic's standard closed-face three-prong flash suppressor, as used on the NC15/NC10 rifles.

     

    • Machined from 4140 pre-hardened steel
    • Black nitride finished for corrosion resistance and durability
    • Closed face to eliminate prong ring
    • .223 flash hider threaded for 1/2-28 barrels
    • .308 flash hider threaded for 5/8-24 barrels
    • Includes crush washer

    NCT3 Flash Hiders

    Nordic's standard closed-face three-prong flash suppressor, as used on the NC15/NC10 rifles.

     

    • Machined from 4140 pre-hardened steel
    • Black nitride finished for corrosion resistance and durability
    • Closed face to eliminate prong ring
    • .223 flash hider threaded for 1/2-28 barrels
    • .308 flash hider threaded for 5/8-24 barrels
    • Includes crush washer
  • fixedgasblock

    Nordic Low-Profile Gas Block

    Price: $69.00

    Nordic Components low-profile non-adjustable .750 gas block.

     

    • Machined with extreme precision from 416 stainless steel
    • Triple-fastener clamp design ensures optimally tight fit on gas block journal and does not require dimpled barrel
    • Black nitride finished for long-lasting durability
    • Minimalist dimensions allow use with slim-profile handguards
    • Features machined flat and spot-drilled locator to facilitate easy pinning of gas block (pin not included)
    • Designed to fit all barrels with .750" diameter gas block journal

    Nordic Low-Profile Gas Block

    Nordic Components low-profile non-adjustable .750 gas block.

     

    • Machined with extreme precision from 416 stainless steel
    • Triple-fastener clamp design ensures optimally tight fit on gas block journal and does not require dimpled barrel
    • Black nitride finished for long-lasting durability
    • Minimalist dimensions allow use with slim-profile handguards
    • Features machined flat and spot-drilled locator to facilitate easy pinning of gas block (pin not included)
    • Designed to fit all barrels with .750" diameter gas block journal
  • NordicDay43387-copy

    Picatinny Rail Sight Block

    Price: $39.95

    Sight block for .750" diameter barrel.

     

    Picatinny Rail Sight Block

    Sight block for .750" diameter barrel.

     

  • NordicDay33196-copy

    Picatinny Rails

    Price: $14.95$33.20

    Picatinny rails for use on our NC1, NC2, and Small Diameter handguards.

    • Multiple lengths to accommodate various handguard sizes
    • Suitable for use as top rail for rail-mounted sights/optics
    • Includes all attachment screws

    Picatinny Rails

    Picatinny rails for use on our NC1, NC2, and Small Diameter handguards.

    • Multiple lengths to accommodate various handguard sizes
    • Suitable for use as top rail for rail-mounted sights/optics
    • Includes all attachment screws
  • NordicDay33074-copy

    QDA Plate for Rifle Handguards

    Price: $19.00

    QDA plate for 2" diameter handguards.

    • Mounting point for quick-detach push button-style sling swivels
    • Designed for Nordic Components NC1 and NC2 handguards
    • Compatible with any 2" diameter handguard with #10-32 tapped holes
    • Includes only attachment plate and #10-32 x 1/2" screw (no swivel included)

     

     

     

    QDA Plate for Rifle Handguards

    QDA plate for 2" diameter handguards.

    • Mounting point for quick-detach push button-style sling swivels
    • Designed for Nordic Components NC1 and NC2 handguards
    • Compatible with any 2" diameter handguard with #10-32 tapped holes
    • Includes only attachment plate and #10-32 x 1/2" screw (no swivel included)

     

     

     

  • sfmb-762-5-8-24 (1)

    SUREFIRE – 7.62 mm (.308 Caliber) SOCOM Muzzle Brakes

    Price: $149.00

    SFMB-762-5/8-24

    Muzzle Brake / Suppressor Adapter

    SUREFIRE – 7.62 mm (.308 Caliber) SOCOM Muzzle Brakes

    SFMB-762-5/8-24

    Muzzle Brake / Suppressor Adapter