M-Lok Accessories

Related Products

PMAG Extension Kit

Price: $9.00

18 round extension for Magpul PMAG®.

• Increases capacity of standard 30-round PMAG® to 48 rounds
• Made of lightweight polycarbonate for weight reduction and strength
• Available in black, clear, and pink
• Fits Gen 1, Gen 2, and MOE PMAGs®
• Includes extended replacement spring
• We do not recommend use of any solvents, oils, or thread-locking products with this extension

Restricted Shipping
Please make sure to follow your local and state laws to ensure you are allowed to possess these.

PMAG Extension Kit

18 round extension for Magpul PMAG®.

• Increases capacity of standard 30-round PMAG® to 48 rounds
• Made of lightweight polycarbonate for weight reduction and strength
• Available in black, clear, and pink
• Fits Gen 1, Gen 2, and MOE PMAGs®
• Includes extended replacement spring
• We do not recommend use of any solvents, oils, or thread-locking products with this extension

Restricted Shipping
Please make sure to follow your local and state laws to ensure you are allowed to possess these.



Gas Tube for AR10/AR15, Mid-length

Price: $13.95

For use with our Lilja and Wilson mid-length gas system barrels

Gas Tube for AR10/AR15, Mid-length

For use with our Lilja and Wilson mid-length gas system barrels



CMC 3.5 LB. Drop-In Trigger – Curved – For Small Pin .154″ Diameter Only.

Price: $167.99

CMC curved-bow drop-in fire control group for AR15-pattern rifles.

• Self-contained drop-in assembly for easy installation
• High-quality match grade trigger with 3.5lb pull weight
• Contained in 410 stainless steel house
• Includes oversized hammer and trigger pins and clip retainers
• For small-pin (.154") lowers only
• Not recommended for use with 5.45x39 rifles
• Also available with straight trigger bow.

CMC 3.5 LB. Drop-In Trigger – Curved – For Small Pin .154″ Diameter Only.

CMC curved-bow drop-in fire control group for AR15-pattern rifles.

• Self-contained drop-in assembly for easy installation
• High-quality match grade trigger with 3.5lb pull weight
• Contained in 410 stainless steel house
• Includes oversized hammer and trigger pins and clip retainers
• For small-pin (.154") lowers only
• Not recommended for use with 5.45x39 rifles
• Also available with straight trigger bow.



Gas Tube for AR10/AR15, Carbine-length

Price: $13.95

Gas tube for AR10/AR15, Carbine-length.

Gas Tube for AR10/AR15, Carbine-length

Gas tube for AR10/AR15, Carbine-length.



Hiperfire HIPERTOUCH 24Elite

Price: $204.25

The HIPERTOUCH® 24E is Hiperfire's elite version of fire-control drop-ins for installation in AR-15 and AR-10 type rifles.

• Improved weight and pull geometry ideal for marksmen and hunters
• Uses stock AR-pattern trigger and semi-automatic disconnector springs with proprietary trigger, hammer, and disconnector components
• Proprietary toggle-over-center spring system allows for lighter and smoother trigger pull without compromising hammer strike force
• Curved trigger bow replicates traditional AR trigger feel
• Trigger pull weight easily adjusted by shooter between 2-4 lbs
• Installs without removal of the safety selector or modification to lower receiver

Hiperfire HIPERTOUCH 24Elite

The HIPERTOUCH® 24E is Hiperfire's elite version of fire-control drop-ins for installation in AR-15 and AR-10 type rifles.

• Improved weight and pull geometry ideal for marksmen and hunters
• Uses stock AR-pattern trigger and semi-automatic disconnector springs with proprietary trigger, hammer, and disconnector components
• Proprietary toggle-over-center spring system allows for lighter and smoother trigger pull without compromising hammer strike force
• Curved trigger bow replicates traditional AR trigger feel
• Trigger pull weight easily adjusted by shooter between 2-4 lbs
• Installs without removal of the safety selector or modification to lower receiver



QDA Plate for Rifle Handguards

Price: $19.00

QDA plate for 2" diameter handguards.

• Mounting point for quick-detach push button-style sling swivels
• Designed for Nordic Components NC1 and NC2 handguards
• Compatible with any 2" diameter handguard with #10-32 tapped holes
• Includes only attachment plate and #10-32 x 1/2" screw (no swivel included)

 

 

 

QDA Plate for Rifle Handguards

QDA plate for 2" diameter handguards.

• Mounting point for quick-detach push button-style sling swivels
• Designed for Nordic Components NC1 and NC2 handguards
• Compatible with any 2" diameter handguard with #10-32 tapped holes
• Includes only attachment plate and #10-32 x 1/2" screw (no swivel included)

 

 

 



Hiperfire HIPERTOUCH 24 3G Competition

Price: $213.75

The HIPERTOUCH® 24 3Gun (24 3G) curved bow competition trigger.

Hiperfire HIPERTOUCH 24 3G Competition

The HIPERTOUCH® 24 3Gun (24 3G) curved bow competition trigger.



NC-1 Free Float Hand Guards

Rated 5.00 out of 5

Price: $79.95 – $94.95

Nordic Components free float tube-style handguard.

• Fits all mil-spec AR15-pattern upper receivers
• Free-float rigidity in a lightweight package
• 10-32 tapped holes provide mounting points for Picatinny rails or other accessories (holes spaced 1 3/4" apart)
• Reduces weight by eliminating fixed Picatinny rails
• 2" outside diameter
• 1 3/4" inside diameter
• Machined from 6061 aluminum
• Includes barrel nut, locking ring, and instructions for installation

NC-1 Free Float Hand Guards

Nordic Components free float tube-style handguard.

• Fits all mil-spec AR15-pattern upper receivers
• Free-float rigidity in a lightweight package
• 10-32 tapped holes provide mounting points for Picatinny rails or other accessories (holes spaced 1 3/4" apart)
• Reduces weight by eliminating fixed Picatinny rails
• 2" outside diameter
• 1 3/4" inside diameter
• Machined from 6061 aluminum
• Includes barrel nut, locking ring, and instructions for installation



NC-2 Free Float Hand Guards

Rated 5.00 out of 5

Price: $94.95 – $104.95

Nordic Components textured free float tube-style handguard.

• Same strength and weight reduction as our NC-1 handguard with additional machined texturing for increased grip
• Fits all mil-spec AR15-pattern upper receivers
• Free-float rigidity in a lightweight package
• 10-32 tapped holes provide mounting points for Picatinny rails or other accessories (holes spaced 1 3/4″ apart)
• Reduces weight by eliminating fixed Picatinny rails
• 2″ outside diameter
• 1 3/4″ inside diameter
• Machined from 6061 aluminum
• Includes barrel nut, locking ring, and instructions for installation

NC-2 Free Float Hand Guards

Nordic Components textured free float tube-style handguard.

• Same strength and weight reduction as our NC-1 handguard with additional machined texturing for increased grip
• Fits all mil-spec AR15-pattern upper receivers
• Free-float rigidity in a lightweight package
• 10-32 tapped holes provide mounting points for Picatinny rails or other accessories (holes spaced 1 3/4″ apart)
• Reduces weight by eliminating fixed Picatinny rails
• 2″ outside diameter
• 1 3/4″ inside diameter
• Machined from 6061 aluminum
• Includes barrel nut, locking ring, and instructions for installation



Picatinny Rails

Price: $14.95 – $45.95

Picatinny rails for use on our NC1, NC2, and Small Diameter handguards.

• Multiple lengths to accommodate various handguard sizes
• Suitable for use as top rail for rail-mounted sights/optics
• Includes all attachment screws

Picatinny Rails

Picatinny rails for use on our NC1, NC2, and Small Diameter handguards.

• Multiple lengths to accommodate various handguard sizes
• Suitable for use as top rail for rail-mounted sights/optics
• Includes all attachment screws



NC10 Receiver Sets

Price: $500.00 – $550.00

The same seamlessly mated NC10 upper and handguard used in our complete NC10 rifles, now available for use on your next build.

• Upper precision machined from 7075 aluminum billet to match the contours of the NC308 handguard
• Upper and handguard finished with black anodizing
• Includes barrel nut and handguard attachment hardware (including indexing pin)
• M-Lok compatible handguard
• Available with 15" (XL) and 17" (XXL) handguards

NC10 Receiver Sets

The same seamlessly mated NC10 upper and handguard used in our complete NC10 rifles, now available for use on your next build.

• Upper precision machined from 7075 aluminum billet to match the contours of the NC308 handguard
• Upper and handguard finished with black anodizing
• Includes barrel nut and handguard attachment hardware (including indexing pin)
• M-Lok compatible handguard
• Available with 15" (XL) and 17" (XXL) handguards



NCT4 Suppressor Shield Modular Handguard

Price: $350.00

The all-new NCT4 Suppressor Shield Modular Handguard allows for use of a full-length handguard with a suppressor mounted.

The NCT4 comes in two lengths, with either a 6.7" or 9.5" handguard to give maximum coverage on 7.5" or 10.5/11.5" barrels, and includes a removable shield to provide over 6" of suppressor coverage.  Both sections are fully M-LOK compatible and feature a seamless continuous top rail.  The suppressor shield is fully toolless, requiring only the push of a button to unlock the shield.  With an inside diameter of 1.850", the NCT4 is spacious enough to accommodate nearly any suppressor.

Fully compatible with standard AR15-pattern upper receivers and able to accommodate most suppressors, the NCT4 is the ultimate in protection, modularity, and mission-specificity for the suppressed short-barreled AR rifle.

*Includes custom 3.8" M-LOK rail to span between handguard and suppressor shield

***WARNING: The suppressor shield must be removed if a suppressor is not installed.  Shooting the firearm with the suppressor shield mounted but without a suppressor may result in damage or injury***

Now accepting pre-orders for shipment in summer 2017.



 

 

[playlist type="video" ids="28629"]

NCT4 Suppressor Shield Modular Handguard

The all-new NCT4 Suppressor Shield Modular Handguard allows for use of a full-length handguard with a suppressor mounted.

The NCT4 comes in two lengths, with either a 6.7" or 9.5" handguard to give maximum coverage on 7.5" or 10.5/11.5" barrels, and includes a removable shield to provide over 6" of suppressor coverage.  Both sections are fully M-LOK compatible and feature a seamless continuous top rail.  The suppressor shield is fully toolless, requiring only the push of a button to unlock the shield.  With an inside diameter of 1.850", the NCT4 is spacious enough to accommodate nearly any suppressor.

Fully compatible with standard AR15-pattern upper receivers and able to accommodate most suppressors, the NCT4 is the ultimate in protection, modularity, and mission-specificity for the suppressed short-barreled AR rifle.

*Includes custom 3.8" M-LOK rail to span between handguard and suppressor shield

***WARNING: The suppressor shield must be removed if a suppressor is not installed.  Shooting the firearm with the suppressor shield mounted but without a suppressor may result in damage or injury***

Now accepting pre-orders for shipment in summer 2017.



 

 

[playlist type="video" ids="28629"]